Hydrographic cruises off northwest Africa: the Canary Current and the Cape Ghir region

We present hydrographic data for several sections located along the African coastline and off Cape Ghir, carried out at times of weak surface winds (October 1995 and September 1997). The main sections are near the continental slope, at mean distances between 100 and 150 km from the coastline. North of Cape Ghir (31°N) the geostrophic transport (referenced to 650 m) of North Atlantic Central Water through these sections is 3.7 and 2.0 Sv for 1995 and 1997, respectively. This confirms that a major fraction of the water transport by the Canary Current flows east, into the continental slope off northwest Africa, at latitudes above Cape Ghir. Most of this flow continues south past Cape Ghir, along the coast and probably through the eastern passages of the Canary Archipelago. A significant fraction, however, may escape through surface Ekman transport (0.3–0.5 Sv during the early fall season) and by offshore flow at Cape Ghir (1.1 Sv in September 1997, referenced to 650 m). Despite the weak winds the Cape Ghir filament was clearly visible, characterized by localized coastal upwelling associated to a cyclonic shallow structure and cold (and fresh) waters stretching offshore as a very shallow feature (50–100 m deep). The satellite images show that the surface temperature field is highly variable, in rapid response to the surface winds, always with a core region of relatively cold water and commonly with one or two associated eddies. Our results support the existence of two recirculation cells in the area: a horizontal one that connects the interior eastern boundary currents with the coastal region and a vertical one related to both wind-induced and filament upwelling. The data also show a salinity subsurface maximum at the root of the filament, linked to water inflow from northern latitudes, and a subsurface anticyclonic eddy over the Agadir canyon, likely related to the poleward slope undercurrent.     

地铁制动试验台测控系统简介

介绍了地铁制动试验台的测试对象和其测控系统的组成与原理。     

Fault Diagnosing System of Steam Generator for Nuclear Power Plant Based on Fuzzy Neural Networks

All kinds of reasons are analysed in theory and a fault repository combined with local expert experiences is establishedaccording to the structure and the operation characteristic of steam generator in this paper. At the same time, Kohonen algo-rithm is used for fault diagnoses system based on fuzzy neural networks. Fuzzy arithmetic is inducted into neural networks tosolve uncertain diagnosis induced by uncertain knowledge. According to its self-association in the course of default diagnosis. thesystem is provided with non-supervise, self-organizing, self-learning, and has strong cluster ability and fast cluster velocity.     

3-D computational method of wave loads on turret moored FPSO tankers

A three-dimensional method of calculating wave loads of turret moored FPSO (Floating Production Storage and Offloading) tankers is presented. The linearized restoring forces acting on the ship hull by the mooring system are calculated according to the catenary theory, which are expressed as the function of linear stiffness coefficients and the displacements of the upper ends of mooring chains. The hydrodynamic coefficients of the ship are calculated by the three-dimensional potential flow theory of the linear hydrodynamic problem for ships with a low forward speed. The equations of ship motions are established with the effect of the restoring forces from the mooring system included as linear stiffness coefficients. The equations of motions are solved in frequency domain, and the responses of wave-induced motions and loads on the ship can be obtained. A computer program based on this method has been developed, and some calculation examples are illustrated. Analysis results show that the method can give satisfying prediction of wave loads.     

The effect of plastic constraint on the initiation of ductile tears in shipbuilding structural steels

In this paper, the effect of plastic constraint on the initiation of ductile tears in four different shipbuilding structural steels has been experimentally studied by measuring the J-integral and crack opening displacement COD at initiation in three-point bend specimens with deep and shallow notches. Experimental results of seven groups of different strength alloy steels show that both Si and Ji values of ductile tear from the shallow crack specimens which have less constraint flow field are significantly higher than those of deeply notched specimens. Slip-line-field analysis shows that, for shallow crack, the hydrostatic stress is lower than that from standard deeply cracked bend specimen, which develops a high level of crack tip constraint, provides a lower bound estimate of toughness, and will ensure an unduly conservative approach when applied to structural defects, especially if initiation values of COD and J-integral are used.     

Simulation System Design of 3-D Panorama of Ship Motions in Wave

In this paper a 3-D panoramic simulation system of a ship is described which is developed with the MAXSCRTPT language and VC + + as programming tools on the platform of 3 Dsmax. The strip theory method is applied to the motion prediction of the mono-hull. The time history solutions of heave and pitch are obtained in the condition of head sea to provide the primary data on panoramic simulation. The simulation system has following functions: 1) digital simulation; 2 ) panoramic simulation; 3) environmental set-up; 4) render preview and output.     

Potential and benefits of AIS to Ships and Maritime Administrations

The Universal Automatic Identification System (AIS) provides a huge variety of potential applications and services which exceed the well known ship-to-ship data exchange. The purpose of this paper is to address the most important AIS services, in particular the AIS position report and the AIS safety-related and binary messages (“AIS telegrams”). The main issue is the impact of this new technology on the on-board use of AIS in collision avoidance (and its limitations) as well as the impact on shore-based services such as Vessel Traffic Service (VTS), port management and the need of an effective AIS network.     

Accessing the global seafaring labour market

As a global labour market exists for international shipping, a challenging issue facing this industry is to get access to reliable, accurate and timely information of seafarers’ demand and supply. Related to the deregulation environment and great variety in the availability and quality of relevant information, an enquiry into the global seafaring labour market is more complex than a national labour force survey. To cope with the challenge, a novel approach has been developed by the Seafarers International Research Centre (SIRC) at Cardiff University. Viewing capital (ship), labour (seafarers) and services (cargo or passengers) as interconnected and interwoven to each other, it collects and analyses crew lists from main ports world-wide, resulting in the creation of the first global seafarers database. The purpose of this paper is explain its methodological principles, and to illustrate its application potential. Taking the cruise sector as an example, research findings and methodological implications are highlighted.     

Maritime search and rescue: Benefit or burden for society?

Just twenty five years have passed since the International Maritime Organization (IMO) provided the legal and internationally harmonized framework for maritime search and rescue operations. While a number of nations only had to adapt their well-established national services it took great efforts for other nations to develop agencies able to fulfil or outstrip minimum requirements. However, the majority of nations (well aware of the humanitarian nature of that task) have been afraid to cope with this challenge and the related financial burdens since the benefits to local, regional, or even national economies are not always clear to the relevant national administrating authorities.