Modeling,parameter estimation and nonlinear control of automotive electronic throttle using a Rapid-Control Prototyping technique

An electronic throttle consists of a DC motor, spur gears, a return spring, a position sensor, power electronics and an electronic control unit. Fast and precise position control of this electromechanical system is relatively difficult due to very high friction and the strong nonlinearity of the spring. Simple application of linear control, such as PID, fails. In this paper, two new controller structures suitable for different reference signal types are described. The key component of the position controller is the friction compensator based on either/both feedforward or feedback principles. The quality of the resulting behavior was measured using several criteria including the measure of control activity around the equilibrium position. The control activity directly influences the vibration, the noise and the wear of the servo system. The proposed controllers demonstrated superior behavior compared with other published structures.     

Computational and experimental investigation of the unsteady flow structures around automotive outside rear-view mirrors

The unsteady flow field around two automotive outside rear-view mirrors is investigated. This study includes comprehensive experimental and computational approaches in order to characterize the complex flow structures in the wake of the mirrors. The experiments were carried out in a wind tunnel which included the measurements of the instantaneous and averaged velocity fields as well as mean and unsteady surface pressure distributions. The simulations were performed using Large Eddy Simulation (LES). The LES approach (particularly with the dynamic subgrid viscosity model) provided good agreements with the experiments for the velocity and the surface pressure distributions. The experimental and the computational results of this study will be used as a benchmark to validate the current and the future CFD development and the subsequent aero-acoustic computations.     

Design and implementation of a UPnP-can gateway for automotive environments

In this paper, we propose a universal plug and play (UPnP) — controller area network (CAN) gateway system using UPnP middleware for interoperability between external smart devices and an in-vehicle network. The proposed gateway consists of a UPnP communication device, a CAN communication device, and a device translator layer. In-vehicle devices are not usually IP-based, so we implemented an in-vehicle device manager in the UPnP communication device which is in the gateway. We developed a vehicle simulator to produce real vehicular data for performance analysis. The CAN communication device transmits and receives real-time vehicle data between the real vehicular simulator and external devices through the UPnP. The device translator layer configures a message frame for enabling seamless data input and output between the CAN and UPnP protocols. After implementation, we generated an internal-external service request and tested the result. Finally, we confirmed the service request and operation between external devices and the internal vehicular device. Additionally, for a variety of external device numbers and communication environments, we demonstrated the gateway performance by measuring the round trip time (RTT) for overall service implementation.     

具有惯性表面的两层流体的柯西-泊松问题(英文)

This paper is concerned with the generation of waves due to initial disturbances at the upper surface of a two-layer fluid, as the upper layer is covered by an inertial surface and the lower layer extends infinitely downwards. The inertial surface is composed of thin but uniform distribution of non-interacting material. In the mathematical analysis, the Fourier and Laplace transform techniques have been utilized to obtain the depressions of the inertial surface and the interface in the form of infinite integrals. For initial disturbances concentrated at a point, the inertial surface depression and the interface depression are evaluated asymptotically for large time and distance by using the method of stationary phase. They are also depicted graphically for two types of initial disturbances and appropriate conclusions are made.     

Biological Status Assessment of Coral Reefs in Southern Puerto Rico: Supporting Coral Reef Protection Under the U.S. Clean Water Act

Abstract

States and other jurisdictions may protect coral reefs using biological water quality standards outlined by the United States Clean Water Act (CWA). Such protection will require long-term, regional monitoring of the resource using biological indicators and a probability-based sampling design. A 60-station survey targeting nearshore linear coral reef was conducted across southern Puerto Rico in December 2011 to document the status of reef inhabitants using a probabilistic, regional sampling design. The quantity, type and condition of stony corals, fish, gorgonians, and sponges were documented from each station, providing a robust representation of linear reef status and composition across the region. Fish represented 106 unique taxa and stony corals 32 unique taxa. Benthic organisms (stony corals, sponges, and gorgonians) averaged nearly 12 colonies per square meter, more than half of which were gorgonians. Assessment results can be used as a baseline to compare with future regional surveys to quantify change in reef condition over time (trend). Both temporal and spatial changes can be expected after large-scale disturbances like hurricanes Maria and Irma in 2017. The indicators and probabilistic sampling design support the long-term regional monitoring envisioned by the Environmental Protection Agency to implement CWA protections in Puerto Rico and elsewhere.     

Urea-SCR system optimization with various combinations of mixer types and decomposition pipe lengths

The demand for NO_x after-treatment system has increased dramatically due to the stricter NO_x emission regulations for diesel vehicles. The urea-SCR system is one of the NO_x after-treatment methods found to be quite effective to meet the regulation requirement enforced by various authorities including the Euro-6. In order to develop an effective urea-SCR system, it is critical to establish an even distribution of reductant over the catalyst surface since this favorable distribution can increase reduction reaction and in turn, improve NO_x conversion efficiencies. In the current study, a number of design variations of the urea-SCR system which included two mixer types and three decomposition pipe lengths, were evaluated systematically using CFD analysis and experimental measurements. The purpose of the CFD analysis was to estimate the distribution of reductant within the urea-SCR system with a specific configuration and the purpose of the engine emission test was to measure the amount of NO_x reduction, respectively. The results from the systematic analysis revealed the relation between the reductant distribution over the SCR and the performance of the NO_x reduction.     

Methodology for bus structure torsion stiffness and natural vibration frequency prediction based on a dimensional analysis approach

Engineering bus design requires testing of bus structures prototypes in order to guarantee a certain level of strength and an appropriate static and dynamic behavior of the bus superstructure when exposed to road loads. However, experimental testing of real bus structures is very expensive as it requires expensive resources and space. If testing is done on a scale bus model the previous required expenses are considerably reduced. Therefore, a novel methodology based on dimensional analysis applied to bus structure prediction to evaluate the bus structure static and dynamic performance is proposed. The static performance is evaluated attending to torsion stiffness and the dynamic in terms of the natural vibration frequencies and rollover threshold. A scale bus has been manufactured and dimensionless parameters have been defined in order to project the results obtained in the scale bus model to a larger model. Validation of the proposed methodology has been carried out under experimental and finite element analysis.     

A fuzzy stochastic approach to the multicriteria selection of an aircraft for regional chartering

This article deals with the problem of decision support for the selection of an aircraft. This is a problem faced by an airline company that is investing in regional charter flights in Brazil. The company belongs to an economic group whose core business is logistics. The problem has eight alternatives to be evaluated under 11 different criteria, whose measurements can be exact, stochastic, or fuzzy. The technique chosen for analyzing and then finding a solution to the problem is the multicriteria decision aiding method named NAIADE (Novel Approach to Imprecise Assessment and Decision Environments). The method used allows tackling the problems by working with quantitative as well as qualitative criteria under uncertainty and imprecision. Another considerable advantage of NAIADE over other multicriteria methods relies in its characteristics of not requiring a prior definition of the weights by the decision maker. As a conclusion, it can be said that the use of NAIADE provided for consistent results to that aircraft selection problem. Copyright © 2012 John Wiley & Sons, Ltd.     

Modelling heavy vehicle car‐following behaviour in congested traffic conditions

This study develops a car‐following model in which heavy vehicle behaviour is predicted separately from passenger car. Heavy vehicles have different characteristics and manoeuvrability compared with passenger cars. These differences could create problems in freeway operations and safety under congested traffic conditions (level of service E and F) particularly when there is high proportion of heavy vehicles. With increasing numbers of heavy vehicles in the traffic stream, model estimates of the traffic flow could be degrades because existing car‐following models do not differentiate between these vehicles and passenger cars. This study highlighted some of the differences in car‐following behaviour of heavy vehicle and passenger drivers and developed a model considering heavy vehicles. In this model, the local linear model tree approach was used to incorporate human perceptual imperfections into a car‐following model. Three different real world data sets from a stretch of freeway in USA were used in this study. Two of them were used for the training and testing of the model, and one of them was used for evaluation purpose. The performance of the model was compared with a number of existing car‐following models. The results showed that the model, which considers the heavy vehicle type, could predict car‐following behaviour of drivers better than the existing models. Copyright © 2013 John Wiley & Sons, Ltd.