A user‐resource planning framework for offshore recreational artificial reefs

Abstract

Artificial reefs have been used extensively in coastal waters to attract and enhance recreational fishery resources. In the United States, they have been traditionally built from “materials of opportunity”; using limited budgets. This paper explores some past planning philosophies and presents a recent artificial reef deployment case that demonstrates a lack of sensitivity to local and regional recreational demand. A systems framework is developed to guide future planning efforts in artificial reef development. The framework is intended to integrate previously fragmented knowledge and to demonstrate the interdisciplinary nature of artificial reef planning. Emphasis is given to advance planning, user dimensions, and the integral issue of reef access.     

Evaluating the energy performance of a SUV hybrid electric vehicle

This paper analyzes the energetic performance of the hybrid Lexus RX 400h, through on-board measurements. Several speed profiles were analyzed, for three driving types, successive stop and go cycles, three speed profiles, crossing an electronic toll collection booth, and a roundabout. In stop and go situations the internal combustion engine did not work (the torque needed to impulse the vehicle in the stop and go situations was only supported by the electric engines), as well as in the situations of constant low speeds (50 or 60 km h^?1). The auxiliary support given by the electric engines in the accelerations, as well as the importance of the energy regeneration system on the batteries’ load recovery is also demonstrated. When compared with similar conventional vehicles, the Lexus RX 400h has lower combined energy consumption between 1.2% and 60%.     

Development of hot stamped center pillar using form die with channel type indirect blank holder

The hot stamping process has been used in the automotive industry to reduce the weight of the body-in-white and to increase passenger safety via improved crashworthiness. However, defects such as fracture and wrinkle occur when hot stamping is performed using a conventional drawing or forming method. In this study, a channel-type indirect blank holder (CIBH) is proposed to develop a high-strength center pillar in form-type hot stamping, so that the aforementioned drawbacks are overcome. This type of blank holder plays an important role in reducing severe wrinkling at the flange; such wrinkling leads to folding after the completion of form-type hot-stamping. First, we investigated the effect of the channel shape on the indirect blank holding force by using a simplified two-dimensional plane-strain stamping process. Second, we selected the slope angle and corner radius of the channel as the main shape parameters by finite element analysis and artificial neural network (ANN). It is known that fracture at the hot formed wall and wrinkle at the flange are significantly affected by the slope angle of the channel, and the appropriate value for eliminating fracture and wrinkle is determined to be 99°. By performing hot stamping using a form die with the selected channel, we can manufacture a high-strength center pillar without wrinkle and fracture.     

Influence of load and inflation pressure on the tyre rolling resistance

Tyre load and inflation pressure are important factors controlling rolling resistance of road vehicles. The article presents results obtained in the Technical University of Gdańsk during laboratory and road measurements of different car tyres rolling on different pavements. The knowledge of rolling resistance characteristics is important for modelling car dynamics as well as fuel consumption. It is also necessary to establish proper test conditions in the future standardized on-road method of measuring rolling resistance. The results indicate that while an increase of load always leads to the increase of rolling resistance force, the influence on Coefficient of Rolling Resistance is more complicated and unpredictable. They also indicate that tyres with high rolling resistance are more sensitive to inflation pressure changes than low rolling resistance tyres.     

Implementation of discharging/charging current sensorless state-of-charge estimator reflecting cell-to-cell variations in lithium-ion series battery packs

This paper offers novel insights to the design and implementation of an innovative state-of-charge (SOC) estimator for the lithium-ion (Li-Ion) series battery pack. The most interesting feature of this approach is that it can utilize information from each filtered terminal voltage of the Li-Ion cells connected in series for SOC estimation of the battery pack. Without actual sensing each discharging/charging current (DCC) applied to the Li-Ion cells, it is possible to extract each DCC estimation from the corresponding filtered terminal voltages with an equivalent electrical circuit model (EECM) identification of all Li-Ion cells in the battery pack. There are two advantages to SOC estimation of the battery pack with this approach. First, the proposal can be implemented simply and effectively, reducing the computational steps required for SOC estimation. By reducing computational steps, the proposal is expected to be more cost-effective. Second, the approach guarantees an improved SOC performance, even if the battery pack results in inevitable cell-to-cell variation among Li-Ion cells. Accordingly, there are fewer differences to previously estimated DCCs among Li-Ion cells. Specifically, all values from the estimated DCCs are properly compensated for by simultaneous parameter modification according to each cell’s electrochemical characteristics. Experimental results clearly demonstrate that our DCC sensorless SOC estimator provides robust SOC performance for the battery pack. This approach considered an experimental battery pack (12S1P) connected in series using 2.6 Ah LiCoO2 cells produced by Samsung SDI.     

A note on the use of correlation coefficients for assessing goodness-of-fit in spatial interaction models

The use of correlation coefficients to evaluate the accuracy of spatial interaction models is inappropriate unless such models have been fitted using least squares techniques. In other cases the correlation involves an implicit intercept value and a regression coefficient that may significantly modify the interaction model's estimates. Researchers have not acknowledged the role of these two parameters when the correlation is used. A generalized root mean square error is proposed as an alternative indicator of accuracy that may be used with any model.     

Longhaul feeder services in an era of changing technology: an Asia-Pacific perspective

Traditional liner carriers, operating in the highly competitive commercial environment of the last few years, have attempted to lower the marginal cost of each box carried. Technological improvements in both construction and propulsion systems have led to a steady growth in carrying capacity. Ships of 600+ TEUs are now in service and, as a result of this trend, have displaced 'smaller' ships from the major east-west trades. The more competitive environment of these trades has in turn led to a redeployment of ships in the 2500+ TEU range to the north-south trades. The result has been a rapid increase in north-south capacity, including feeder services and falling freight rates. Despite the current excess supply in shipping and historically low freight rates, significant developments in technology have created opportunities for new fast containerships. The paper analyses the key economic factors in the differentiation of the new fast ship technology from the traditionally designed containerships and demonstrates the potential financial viability to owners of these new 'greyhounds'.     

Conditional modelling of tanker market risk using route specific freight rates

This paper provides statistical evidence in support of the view, widely held in the tanker industry, that there are systematic differences in the degree of risk involved in investing in tankers of different sizes, and in operating tankers in spot and time charter markets. The industry view, broadly supported by the results of this paper, is that larger vessels are 'risker' assets than smaller vessels, and operating vessels in the time-charter market is less risky than employing them on a spot basis. The results are obtained by using a method derived from the financial economics literature, which models both the conditional mean and variance of a variable, known as GARCH modelling. Only one other paper has applied this method to the tanker market, and these results provide confirmatory support of those findings.     

Devising business strategy for railways

This paper presents a case study which tackles a general problem for railway management, namely the formulation of a strategy to improve business financial performance. This is prefaced, in Section 2, by discussion of general principles - concerning the type of information system required, investigations to be conducted and associated measurement needs. The case study, of Section 3, concerns our investigations of VicRail's total business and its constituents. The task of financial improvement is revealed from an assessment of sectors' current cost-recovery positions and the identification of system joint costs. For freight sectors, future traffic prospects, pricing possibilities and the scope for more efficient operations are then considered, and the implications traced for overall deficit reduction and the development of business strategy. The concluding section draws some general lessons for railway managements.A fuller discussion by the authors of the theoretical framework employed, and particularly of the case study application, is contained in a complimentary publication: Improving Railway Financial Performance, published by Gower in January 1985.Transmark is a subsidiary of the British Railways Board, acting as its international consultancy. The authors, who were respectively study director and manager, wish to thank Bernard Warner (an independent consultant), Richard Eccles (of Transmark) and Adrian Balkyn-Rackowe (of British Rail) for their valuable contributions. The study report, titled Rail Cost — Pricing Options, was released by the Minister in April 1981.