Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

多模块连接半潜式平台稳性对比分析

为开发我国海洋丰富的渔业、油气和旅游资源,可以在指定海域布设超大型浮式结构物,作为综合保障基地,提供船舶停靠、人员居住、渔业加工、油气开发、环境监测、飞机起降等多种功能.考虑到建造、运输等因素,超大型浮式结构物一般由多个相同或相似模块连接组成.本文基于一型半潜式平台模块,分别开展单、双、三模块的稳性分析,并对其稳性分析结果进行对比分析,探讨模块数量对平台稳性的影响,为超大型浮式结构物的后续设计与运营提供参考.     

船舶电网谐波分析

本文介绍了电力推进船舶谐波,阐明了谐波产生的原因和谐波的危害,分析总结了抑制船舶谐波的方法和措施。     

Buck斩波电路电流连续与电流断续的比较研究

对降压斩波电路负载加反电动势其电流在不同情况下发生的连续和断续现象进行了研究。根据分段线性化思想,推断出降压斩波电路输出电流在断续情况下的条件,给出了其在电流断续的计算公式,为其实际应用提供了方便。     

不同加筋形式对结构声辐射性能的影响

本文基于统计能量法分析了横向加筋板,纵向加筋板,斜加筋板,圆心在板角的圆弧形加筋板,圆心在板中轴的圆弧形加筋板,正交加筋板等六种不同加筋形式板在100Hz至1000Hz内的声辐射特性,研究表明正交加筋板的平均辐射声压级要低于另外五种形式的加筋板.研究了两类改变加强筋间距的横向加筋板的声辐射性能,研究表明对于固定左侧的一根加强筋改变加强筋间距,随着加强筋间距的增大,辐射声压级先增大后减小,而对于板中线为基准改变加强筋间距,对辐射声压级影响不大.最后,本文研究加筋板在主机舱中的实际应用,建立了三种主机舱模型,分析模型的声辐射特性,研究表明复合加筋形式的主机舱辐射声压级最小,相对于无加筋形式,要低4~5dB左右.     

柳江红花二线船闸输水系统布置与水力学模型试验研究

红花二线船闸是广西西江黄金水道首批重点建设项目,是提升柳江及西江通航能力、实现西江亿吨黄金水道的重要工程,其闸室规模与三峡船闸一致、工作水头近20 m、输水能量巨大。结合工程特点,选择了闸底长廊道侧支孔输水系统,设计了输水系统具体布置,并提出采用汇合廊道改善单边阀门运行输水流态的措施。通过比尺为1∶30的物理模型试验,对不同阀门运行工况下输水系统水力特性、闸室船舶停泊条件、进出水口水流条件等开展研究,推荐了使水力指标满足规范和设计要求的阀门开启方式。     

急性脑梗死患者血C反应蛋白水平与颈动脉粥样硬化的关系

目的探讨急性脑梗死患者血C反应蛋白(CRP)水平与颈动脉粥样硬化的关系。方法对52例急性脑梗死患者和30例对照组进行观察。采用速率散射比浊法测定血CRP含量;应用美国Acuson Sequoia 521彩色电脑声像仪检测颈动脉内膜-中膜厚度(IMT),观察颈动脉粥样斑块。结果急性脑梗死患者血CRP含量、颈动脉IMT和粥样斑块数较对照组明显增加;血CRP水平与临床神经功能缺损评分、吸烟指数、颈动脉IMT及斑块数呈正相关。结论CRP作为炎性指标可能在促进动脉粥样硬化的发生和发展中起了重要的作用;血CRP水平可作为急性脑梗死患者病情轻重和预后的评价指标。     

双索悬索桥自振特性分析

以黄河大峡水库下游某双索悬索桥为工程背景,引入只受拉三维拉索单元,采用考虑几何非线性的子空间迭代法对其自振特性进行了分析,理论值与实测值能较好的吻合,说明了该空间非线性有限元分析方法的正确性;进而与相同跨径和结构参数的单索悬索桥的自振频率、振型进行了对比分析,结果表明双索悬索桥能有效提高桥梁一阶竖弯振动频率,为双索悬索桥结构设计理论提供了动力性能方面的依据.     

桥墩防撞装置碰撞动力学分析

运用非线性有限元基本理论，采用国际上广泛使用的大型结构分析程序LS-DYNA，建立了船舶和桥墩防护装置的三维有限元计算模型，分析了防护装置碰撞特点、船首及构件的损伤和吸能特性，得出了主要吸能结构吸能比例，碰撞力曲线的非线性特点，船体和防撞装置外板是主要的吸能结构等结论．