构建西江现代物流体系 打造世界加工制造次中心

文章基于当前产业结构大调整背景,提出广西要在迎接产业转移的竞争中胜出,必须着力构建以西江水运为龙头的现代物流体系,从而把西江经济带打造成为与＂珠三角＂这一世界加工制造中心紧密联动的加工制造次中心。     

垂直水幕作用下扩建地下水封油库布局方式研究

为研究垂直水幕对扩建地下水封油库布局方式的影响,以某大型地下水封洞库分期建设工程为依托,采用有限元数值模拟方法,对有、无垂直水幕条件下扩建洞库的布局方式进行研究。研究结果表明： 1）当两期洞库间距较小时,在两期洞库之间设置垂直水幕可有效削弱拟建洞库对已建洞库水封可靠性的影响,随两期洞库间距的增加,垂直水幕的影响性逐渐减弱; 2）拟建洞库轴线方向对水封可靠性的影响受地形等条件的影响较大,在两期洞库之间设置垂直水幕对水封可靠性的影响较小; 3）随拟建洞库埋深的增加,拟建洞库的水封可靠性逐渐增强,已建洞库的水封可靠性却呈逐步减小趋势,在两期洞库之间设置垂直水幕可有效减小埋深对两期洞库水封可靠性的影响。     

管线敷设与风机室布置对综合管廊通风阻力影响研究

为准确估算管线敷设与风机室内气流相互作用对压降损失的影响,基于武汉市江夏区谭鑫培路地下综合管廊项目建立典型数值分析模型与分析流程。通过建立典型管线布置的GIL舱、高压舱与综合舱的计算流体动力学三维模型,分别对入口段与稳定段进行分析,并使用循环边界条件来考虑稳定段流体的充分发展,得到阻力系数随流量的变化规律;通过建立GIL舱典型排风口三维模型,分析风机室中不同风机的压降损失,并与规范估算值进行比较。研究结果表明： 管线敷设对压降损失的影响不可忽视;风机室风机相互作用显著,规范不能准确估算该相互作用导致的压降损失。     

A mixed Bayesian network for two-dimensional decision modeling of departure time and mode choice

The modeling of travel decision making has been a popular topic in transportation planning. Previous studies focused on random-utility discrete choice models and machine learning methods. This paper proposes a new modeling approach that utilizes a mixed Bayesian network (BN) for travel decision inference. The authors use a predetermined BN structure and calculate priori and posterior probability distributions of the decision alternatives based on the observed explanatory variables. As a “utility-free” decision inference method, the BN model releases the linear structure in the utility function but assumes the traffic level of service variables follow multivariate Gaussian distribution conditional on the choice variable. A real-world case study is conducted by using the regional travel survey data for a two-dimensional decision modeling of both departure time choice and travel mode choice. The results indicate that a two-dimensional mixed BN provides better accuracy than decision tree models and nested logit models. In addition, one can derive continuous elasticity with respect to each continuous explanatory variable for sensitivity analysis. This new approach addresses a research gap in probabilistic travel decision making modeling as well as two-dimensional travel decision modeling.     

Numerical Simulation of Advanced Geological Forecasting Based on Multi- Source Seismic Interferometry北大核心CSCD

For existing advanced geological forecasting, the forecast distance is short and the test frequency is high, increasing test and construction risks. Since various methods have different requirements for the test environ-ment, preparation work can be tedious and result in a long construction time thereby affecting normal construction.A new advanced geological forecast technique based on multi-source seismic interferometry for tunnels is proposed.This technique uses the blast at one end of tunnel as a centrum and receives the signal at the other end of the tun-nel, therefore allowing advanced geological forecasting of the unexcavated tunnel part by relative processing and im-aging. A numerical simulation of this kind of geological forecasting using the finite difference method to simulate two kinds of unfavorable geological bodies (karst and a fault) predicted them accurately and verified the effective-ness and accuracy of this geological forecasting method. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

阿赛线改造工程管道防腐保温补口方法

文中介绍了"防腐层+保温层+防护层+封口"复合防腐保温补口结构在阿赛线安全扩能改造工程中的应用,介绍了复合防腐保温补口结构的施工方法和检验方法,总结了现场施工中出现的问题和解决方法,对这种复合补口结构的优点和缺点进行了分析,最后提出了改进建议。     

高速公路施工对周围生态环境的影响建议

本文主要研究了高速公路施工对生态环境产生的影响,主要从施工对环境的影响因素,及施工中对环境保护的防护措施两方面进行论述,希望通过研究分析改善高速公路施工生态环境,仅供参考。     

自动化散货码头装卸作业存在的问题与对策

针对目前国内已投入运营的自动化散货码头在装卸机械设备配置、功能区域划分、安全管理等方面存在的问题进行分析。提出针对性的解决对策,以进一步提高自动化散货码头的装卸作业效率并确保作业安全。对自动化散货码头的技术发展进行展望,供自动化散货码头建设或升级改造时参考和借鉴。