Power network parameter estimation method based on data mining technology

The parameter values which actually change with the circumstances, weather and load level etc.produce great effect to the result of state estimation. A new parameter estimation method based on data mining technology was proposed. The clustering method was used to classify the historical data in supervisory control and data acquisition (SCADA) database as several types. The data processing technology was impliedto treat the isolated point, missing data and yawp data in samples for classified groups. The measurement data which belong to each classification were introduced to the linear regression equation in order to gain the regression coefficient and actual parameters by the least square method. A practical system demonstrates the high correctness, reliability and strong practicability of the proposed method.     

正常绒毛和葡萄胎中Mel-CAM标记中间型滋养细胞的增殖情况

目的探讨葡萄胎中Mel-CAM与滋养细胞黏附、浸润之间的关系以及Mel-CAM标记中间型滋养细胞(IT)的增殖情况。方法采用双重免疫组化法,检测Mel-CAM标记IT的Ki-67表达情况。结果葡萄胎中Mel-CAM表达较正常绒毛明显增高,差异有统计学意义(P<0.05);葡萄胎绒毛表面有Mel-CAM标记IT出现,而正常绒毛表面则无;葡萄胎组织中IT的Ki-67指数较正常绒毛明显增高,差异有统计学意义(P<0.05)。结论葡萄胎绒毛表面有Mel-CAM表达,表现出双重分化方向,这可能与葡萄胎的发病机制有关;检测葡萄胎组织中IT的Ki-67指数对于预测葡萄胎的转归有潜在的价值。     

高压共轨电控喷射柴油机

简述高压共轨柴油发动机组成、原理及特点,并介绍其发展趋势,对推广使用高压共轨柴油发动机具有指导意义。     

电压型三相H桥逆变器直流支撑电容容值优化

直流支撑电容是电压型逆变器的重要组成部分,其选型直接影响到逆变器的电气性能以及整机功率密度.针对三相H桥逆变器,提出了一种通过相间载波移相减小支撑电容谐波电流的方法.采用开关函数法和双重傅里叶级数分析了逆变器支撑电容电流的主要谐波成分,给出了优化电容容值的计算方法.通过仿真对比相间载波移相前后,保持直流母线波动幅值一致...     

Image Registration Technique for Assessing the Accuracy of Intraoperative Osteotomy for Pelvic Tumors by 3D-Printed Patient-Specific Templates

The study aimed to explore the feasibility of an image registration technique for assessing the accuracy of intraoperative osteotomy of pelvic tumors by 3-dimen...     

Application of 3D Printing and WebGL-Based 3D Visualisation Technology in Imaging Teaching of Ankle Joints

With the rapid development of medical technology,3D printing technology with realistic representation can perfectly display static human anatomy,while 3D visual...     

Virtual prototype simulation on underwater hydraulic impingement shovel

The virtual prototype technology is applied to the design of the hydraulic impingement shovel, which is to increase the reliability of the design. The work principle of hydraulic impingement shovel is expatiated, and its dynamic equations are established. The 3D model of virtual prototype is built by PRO/E. Then the couple between the mechanical body of prototype and the hydraulic system is completed by virtue of ADAMS. Finally, the simulation is made on the virtual prototype. The simulation results show that the design of underwater hydraulic impingement shovel is rational. The virtual prototype technology could lay sound foundation of successful manufacturing of physical prototype for the first time and offer highly effective and feasible means for the design and production of underwater equipments.     

Experimental study on the width of the turbulent area around bridge pier

At present, the method of calculating the turbulent flow width around the bridge pier is not given in the "Standard for Inland River Navigation" (GB50139-2004) in China, and the bridge designer usually increases the bridge span in order to ensure the navigation safety, which increases both of the structural design difficulty and the project investments. Therefore, it is extremely essential to give a research on the turbulent flow width around the bridge pier. Through the experiments of the fixed bed and the mobile bed, the factors influencing the turbulent flow width around the bridge pier have been analyzed, such as the approaching flow speed, the water depth, the angles between the bridge pier and the flow direction, the sizes of bridge pier, the shapes of the bridge pier, and the scouring around the bridge pier, etc. Through applying the dimension analytic method to the measured data, the formula of calculating the turbulent flow width around the bridge pier is then inferred.     

Using a SVM to evaluate damage to vibration isolators in an elastic raft system

Predicting damage to vibration isolators in a raft experiencing heavy shock loadings from explosions is an important task when designing a raft system. It is also vital to be able to research the vulnerability of heavily shocked floating rafts unreliable, especially when the allowable values The conventional approach to prediction has been or ultimate values of vibration isolators of supposedly uniform standard in a raft actually have differing and uncertain values due to defective workmanship. A new model for predicting damage to vibration isolators in a shocked floating raft system is presented in this paper. It is based on a support vector machine（SVM）, which uses Artificial Intelligence to characterize complicated nonlinear mapping between the impacting environment and damage to the vibration isolators. The effectiveness of the new method for predicting damage was illustrated by numerical simulations, and shown to be effective when relevant parameters of the model were chosen reasonably. The effect determining parameters, including kernel function and penalty factors, has on prediction results is also discussed. It can be concluded that the SVM will probably become a valid tool to study damage or vulnerability in a shocked raft system.     

A second order volume of fluid （VOF） scheme for numerical simulation of 2-D breaking waves

Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid (VOF) methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method (BIM) have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the commercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme.