Marine accident analysis for collision and grounding in oil tanker using FTA method

In this study, collision and grounding data registered in GISIS (Global Integrated Shipping Information System) were investigated for oil tankers. The database includes the information of the collision and grounding accidents during the period between 1998 and 2010 in oil tankers. The risk assessments were carried out using fault tree analysis (FTA) programme for the incidents as collision and grounding occurred in oil tankers. In this study, we were able to investigate first the potential problems which cause the collision and grounding accidents have been determined, second, the occurrence of accidents has been shown with causal factors by the FTA method, and, finally, the significance degree of the initial events causing occurrence of accidents have been put forth. Collision in oil tanker resulted in economical loss (81%), pollution (6%) and death or injury (13%). Grounding in oil tanker resulted in economical loss (91%) and pollution (9%). According to the FTA results, the main reason for the accidents originating from human error is as follows: for collision accidents, Convention on the International Regulations for Preventing Collisions at Sea (COLREG) violation and the lack of communication between vessels; and for grounding accidents, the interpretation failure of the officer on watch and lack of communication in the bridge resource management.     

波浪作用下30万吨级油轮撞击能量研究

通过物理模型试验,研究不规则波作用下30万吨级油轮撞击能量,分析了主要影响因素HT、LB、TT0、D对撞击速度的影响规律。结果表明:撞击速度与HT成正比;与LB成幂次关系;与TT0也成正比,但TT0=1时船舶撞击码头与波浪产生共振,撞击速度出现极大值;压载时的撞击速度大于满载时的撞击速度,撞击速度与吃水成负相关。提出了30万吨级油轮撞击能量的计算公式,与青岛港原油码头三期工程和青岛益佳集团燃油码头工程的物理模型试验结果对比,具有较好的计算精度,可供工程设计参考。     

徐圩防波堤工程桶式基础结构设计

桶式基础结构是一种新型防波堤结构,目前尚没有成熟的设计标准和施工工艺。结合连云港徐圩防波堤工程,介绍此结构的设计荷载工况、结构模型试验、有限元分析方法、配筋方法。通过对比土体-结构相互作用模型和简化独立桶体模型,说明两种分析方法的优劣。以实例对比说明中国规范和美国混凝土学会ACI 318规范关于双向板裂缝宽度的计算方法。     

基于DSP的船舶电站监控系统设计

电站为船舶提供动力来源,在船舶航行中有非常重要的地位。对电站的监控现在也有比较成熟的技术,包括各种控制软件的应用。本系统结合实际情况及最新发展,提出基于DSP的船舶电站监控系统,芯片选用的是TI公司的TMS320F2812 DSP作为核心处理器,该型号DSP工作效率高,控制精度比较高,性能稳定,对于信号处理及硬件的控制都有很好的优势,可以使得监控系统稳定高效的工作。本系统配以MCGS组态软件作为监控软件,可以实时的从电脑终端对船舶中的各个设备及电站的工作状态进行可视化监控,以便做出及时决策。系统可以手动及自动的控制发电机开启、停止、加减速,并且系统可以在出现故障的时候进行报警提示。     

东营港区航道工程潮流物理模型试验研究

横流是东营港区港口航道建设中面临的关键技术问题之一。针对东营港区进出港航道工程不同防波挡沙堤布置下航道水流条件,采用潮流物理模型试验进行分析研究。结果表明:南、北防波堤形成后,口门航道处流速较大,从改善通航条件的角度出发,修建防波挡沙堤是必要的;防波挡沙潜堤保持相同的坡度,堤头分别修建至-12 m和-14 m时,口门航道水流流速逐步减小,口门横流也随之减小;随着防波挡沙堤堤顶高程增大,堤头挑流流速会有一定程度的增加;潜堤堤头建至-14 m等深线处、堤顶高程在-8 m左右是适宜的。     

新型聚氨酯碎石空心块体生态堤结构构建*

为降低工程对河口环境的不利影响、提升生态效应,依托长江口南槽航道治理一期工程整治建筑物工程进行生态堤结构研究。根据长江口生物类群生态特征并结合工程影响因素,确定大型底栖动物作为目标生物研究对象,分析给出主要优势物种的生境需求特性和关键指标。在此基础上,提出新型生态聚氨酯碎石空心块体结构,给出堤身结构设计形式,并通过流体动力学数值方法对比研究不同块体平面组合布置方式。提出新型空心块体结构的施工工艺,进行结构吊运内力有限元分析,并通过实际施工试验验证可行性。     

超空泡航行体加速过程流动特性研究

超空泡航行体加速过程是航行体进入高速巡航状态的重要阶段。为了深入了解超空泡航行体加速过程中的流动特性,文中采用基于欧拉两流体模型的CFD方法以及基于相对运动的源项法对超空泡航行体全沾湿加速过程、通气加速过程进行了数值模拟,其中全沾湿过程主要研究了加速过程附加质量变化规律,通气加速过程研究了通气量、重力效应以及航行体攻角对空泡发展速度的影响。研究结果表明全沾湿加速过程中由于加速度较大,附加惯性力影响不能忽略;通气量、航行体攻角对超空泡生成速度均有较大影响,当速度达到50 m/s以上时,重力效应对空泡生成速度影响可以忽略。     

Factors associated with home-based e-working and e-shopping in Nanjing,China

The widespread adoption of information and communication technology has facilitated frequent e-activities in people’s daily life. From the perspective of individual’s time use on e-working and e-shopping at home, this paper aims to enhance our understanding of the function of home beyond a living space for family life. Using a household survey of 608 full-time paid employees who conducted e-activities at home in Nanjing, China, we investigated the characteristics and patterns of home-based e-working and e-shopping. Only 7.9% of the respondents neither e-shopped nor e-worked at home. We find that the socio-demographic context, Internet use habits, attitudes towards e-working/e-shopping, and geographical accessibility have influenced the patterns of home-based e-working and e-shopping. The results indicate that the rich e-activities taking place at home have changed the time use at home and reinforced the function of home as a multifunctional hub.     

Effects of the ‘Belt and Road’ initiative on the wine import logistics of China

China’s Belt and Road (BR) initiative is expected to facilitate international trade between the countries involved. In this study, we review the special requirements of wine logistics and the market growth potential of wine consumption in China. A model minimizing generalized logistical costs is developed and applied to wine imports in China, so that the best candidate cities in which to locate transport gateways and distribution centers can be identified. Our analysis suggests that the most preferred gateways are Shanghai, Tianjin, Guangzhou, and Hong Kong, which all have similar delivery costs. In comparison, Beijing and Chongqing have much higher delivery costs, mainly because they do not have good access to marine transport and/or efficient domestic distribution networks. For long-distance intercontinental transport of large volumes of wine, marine shipping remains the only viable delivery mode. However, wine distribution within China extensively uses air, road, and water transport. Therefore, cities with excellent multi-modal transport services are better positioned to become wine logistics gateways. Our study also highlights the importance of value-added services and good government support, which are important factors that influence distribution costs and quality.     

Property Evolution of Sulphoaluminate Grouting Material under Pressure Circulation北大核心CSCD

Water-sealed underground oil tank projects are quite different from traditional underground projects since the water-sealing conditions are very strict and the difficulties caused by the geological specificity, structural specificity and construction specificity are key factors affecting the project. In light of the significant early initial setting time and rapid temperature increase of sulphoaluminate cement-based grouting material for a large domestic water-sealed underground oil tank with pressurized cyclic grouting, a laboratory grouting simulation is conducted. It is found that the properties of the sulphoaluminate cement-based grouting material are quite different under different pressure cycles, the hydration exothermic peak time gets shorter with an increase of circulation time, the compressive strength decreases with an increase of circulation time, and the longer the circulation time the more obvious the de-crease of compressive strength. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.