港口供电系统改进

目前港口供电系统存在体积大、结构设置不合理和不适应环境等问题,经研究提出了减小体积、优化系统配置、提高箱变安全性和环境适应性等相应对策,在研究的基础上设计了一种新型箱式变电站,解决了目前港口供电系统存在的不足.     

Approximate optimal AUTOSAR software components deploying approach for automotive E/E system

The AUTOSAR has been developed as the worldwide standard for automotive E/E software systems, making the electronic components of different suppliers to be employed universally. However, as the number of component-based applications in modern automotive embedded systems grows rapidly and the hardware topology becomes increasingly complex, deploying such large number of components in automotive distributed system in manual way is over-dependent on experience of engineers which in turn is time consuming. Furthermore, the resource limitation and scheduling analysis make the problems more complex for developers to find out an approximate optimal deploying approach in system integration. In this paper, we propose a novel method to deploy the AUTOSAR components onto ECUs with the following features. First, a clustering algorithm is designed for deploying components automatically within relatively low time complexity. Second, a fitness function is designed to balance the ECUs load. The goal of our approach is to minimize the communication cost over all the runnable entities while meeting all corresponding timing constraints and balancing all the ECUs load. The experiment results show that our approach is efficient and has well performance by comparing with other existing methods in specific and synthetic data set.     

废气旁通阀开度对增压直喷汽油机部分负荷性能的影响

汽油机节气门产生的节流损失对增压发动机泵气损失的影响相当严重,尤其是在中小负荷时,针对这一问题采用试验的方法研究了中小负荷下旁通阀开度对增压直喷汽油机性能的影响。研究结果表明,在节气门开度较小的小负荷工况下,涡轮增压器不宜工作,否则排气背压过大,对发动机非常不利;而废气旁通阀全开可以减小排气背压,能使发动机的动力性和经济性提高3%左右。对废气旁通阀的合理控制可以实现发动机在自然吸气和涡轮增压两种模式之间的转换。     

Modelling,simulation and applications of longitudinal train dynamics

ABSTRACT

Significant developments in longitudinal train simulation and an overview of the approaches to train models and modelling vehicle force inputs are firstly presented. The most important modelling task, that of the wagon connection, consisting of energy absorption devices such as draft gears and buffers, draw gear stiffness, coupler slack and structural stiffness is then presented. Detailed attention is given to the modelling approaches for friction wedge damped and polymer draft gears. A significant issue in longitudinal train dynamics is the modelling and calculation of the input forces – the co-dimensional problem. The need to push traction performances higher has led to research and improvement in the accuracy of traction modelling which is discussed. A co-simulation method that combines longitudinal train simulation, locomotive traction control and locomotive vehicle dynamics is presented. The modelling of other forces, braking propulsion resistance, curve drag and grade forces are also discussed. As extensions to conventional longitudinal train dynamics, lateral forces and coupler impacts are examined in regards to interaction with wagon lateral and vertical dynamics. Various applications of longitudinal train dynamics are then presented. As an alternative to the tradition single wagon mass approach to longitudinal train dynamics, an example incorporating fully detailed wagon dynamics is presented for a crash analysis problem. Further applications of starting traction, air braking, distributed power, energy analysis and tippler operation are also presented.     

TNFα、Leptin-Rb、NF-κB和PPAR-γ在酒精性肝病大鼠肝细胞中的表达

目的 探讨TNFα、NF-κB、Leptin-Rb和PPAR-γ等在大鼠酒精性肝病中与肝组织炎症、坏死和纤维化的关系.方法 胃造瘘法建立长期大鼠酒精性肝病模型,分别在第4、8、12、24和52周用免疫组化、原位杂交和RT-PCR技术检测不同阶段大鼠肝组织中TNFα、NF-κB、PPAR-γ和Leptin-Rb等的表达.结果 TNFα、NF-κB和Leptin-Rb水平在模型组大鼠肝细胞中,第8周表达逐渐增强,第24周起高水平表达一直持续至52周(P<0.01).PPAR-γ在对照组和第4、8周模型组肝细胞中表达最强,第12周表达开始减弱.TNFα和NF-κB在肝细胞中的表达呈明显正相关关系,与PPAR-γ则呈负相关关系(P<0.01).结论 TNFα和NF-κB与肝细胞病变程度有很好的一致性关系,Leptin-Rb在肝细胞的表达与肝纤维化发展相一致,PPAR-γ则刚好相反.     

生存素在5-氟尿嘧啶诱导人绒癌细胞株JAR凋亡中的作用

目的探讨生存素(survivin)在化疗药物5-氟尿嘧啶(5-Fu)诱导的人绒癌细胞株(JAR)凋亡中的作用。方法用JAR细胞株进行培养传代,以不同浓度5-Fu作用于JAR细胞,MTT方法观察5-Fu对JAR细胞生长的抑制情况,流式细胞仪检测细胞凋亡率,用逆转录聚合酶链(RT-PCR)和免疫印迹技术(Western-blot)方法检测survivin基因和蛋白的表达。结果①5-Fu对JAR细胞的生长具有抑制作用,并有浓度和时间的依赖性;②5-Fu诱导JAR细胞凋亡,凋亡率随浓度而增加;③5-Fu作用后survivin基因和蛋白表达减少,随浓度增加而减少。结论5-Fu可能是通过降低survivin表达水平,诱导JAR细胞凋亡。     

The role of interleukin-8 produced by tumor induced fibroblasts in the development of cutaneous melanoma

Objective To determine the role of interleukin-8 (IL-8) produced by tumor induced fibroblasts in the development of cutaneous melanoma. Methods B16 melanoma cells induced L929 fibroblasts phenotype was transdifferentiated to myofibroblasts (MF) by co-culture in vitro. MF was monitored by morphology and immunophenotype for a-SMA. The level of IL-8 was detected by ELISA. The effect on B16 cell proliferation rate was estimated using MIT method in vitro. Melanoma implanting model was constructed in C57 mice. Results L929 MF phenotype could be modulated by B16 melanoma cells-derived transforming growth factor-β1 (TGF-β1) and elevated the levels of IL-8. L929 MF did not influence the B16 melanoma cells viability in vitro, but shortened the time of tumor formation and increased the incidence rates of tumors in C57 implanting model mice. Conclusion Fibroblasts can be activated by tumor cells and produce IL-8, which acts as an inflammatory cytokine promoting the development of cutaneous melanoma.     

EGFR、Ku70、NF-κB及Bcl-2在Graves病中的表达及意义

目的研究Graves病患者细针穿刺组织中EGFR、Ku70、NF-κB和Bcl-2基因的表达水平,探讨其在Graves病发生发展中的作用。方法 Graves病组患者59例,平均年龄(44.66+12.94)岁,其中男16例,女43例;甲状腺结节周围正常甲状腺组织标本27例为对照组,平均年龄(44.64+14.27)岁,其中男6例,女21例。采用实时荧光定量逆转录-多聚酶链反应(RT-PCR)法检测EGFR、Ku70、NF-κB和Bcl-2在Graves病及对照组甲状腺组织中的表达,t检验分析基因表达水平差异;Pearson相关法分析基因表达与临床特征及相关血清学指标之间的关系。结果上述基因在对照组及Graves病甲状腺组织中都有不同程度的表达。Graves病患者组织中EGFR及Ku70的表达水平明显高于对照组甲状腺组织(1.752±0.660 vs.0.859±0.125,P<0.05;3.304±0.402 vs.0.768±0.102,P<0.001);NF-κB及Bcl-2的表达水平明显低于对照组甲状腺组织(0.578±0.066 vs.0.884±0.085,P<0.001;0.834±0.086vs.1.235±0.261,P<0.05)。Graves病组织中NF-κB与Bcl-2表达水平呈正相关(r=0.399,P<0.001)。Graves病组织中Ku70的表达水平与血清TgAb水平呈正相关(r=0.263,P<0.05),而其他基因表达与相关血清学指标无关(P均>0.05)。结论 Ku70、EGFR、NF-κB、Bcl-2介导的信号转导通路可能参与了Graves病的发生、发展过程。     

Er~(3+)及Er~(3+)/Yb~(3+)掺杂YBa_3B_9O_(18)材料的发光性能

通过高温固相烧结法制备了Er3+掺杂以及Er3+/Yb3+共掺杂YBa3B9O18荧光粉.X射线衍射结果表明,Er3+/Yb3+的掺杂并没有改变基质的六方结构.应用325 nm激光激发Er3+掺杂YBa3B9O18,观察到了Er3+离子的特征发射峰,证明了Er3+离子与基质间的能量传递.应用980 nm激光分别激发Er3+掺杂以及Er3+/Yb3+共掺杂YBa3B9O18荧光粉,观测到了Er3+离子的上转换过程,该过程可通过能级图进行解释.实验结果表明Yb3+对Er3+的上转换发光有敏化作用.