考虑螺旋桨体积力的水下机器人水动力特性仿真

为在初步设计时预测ROV的水动力性能,使用CFD技术进行分析,以ROV模型为例,最大程度地保留ROV内部的构件,使模型更加接近真实状况。分别计算ROV在不同工况下的阻力、不同漂角下的横向力和转艏力矩以及添加体积力模型之后的螺旋桨流场状况,很好地模拟出ROV周围的流场,并与已有的试验数据进行对比。结果验证了CFD水动力仿真的可行性和准确性,并还可预测ROV在螺旋桨作用下的进速等,对ROV设计具有实际的参考价值和指导意义。     

37500m3乙烷运输船液货舱的载荷传递

本文针对为应对美国页岩气革命而研发的37,500m3全球最大型乙烷运输船,就超长的C型独立液货舱的静态载荷如何传递到船体结构,进行了深入地分析研究,设计了不同的载荷分布方式和相应的装载工况,并通过有限元方法进行了分析验证,得出了一些实用的结论,对今后采用C型独立液货舱的液化气船的设计提供了重要参考。     

基于CATIA二次开发的水下平台静水力计算

水下平台静力计算包含初稳性计算、潜浮稳性计算、大倾角稳性计算、重量重心统计等,传统潜艇、潜器等水下平台的静力计算具有计算过程繁琐、耗时长、效率低、数据不易更新等问题,导致设计人员大量重复性劳动。本文通过对CATIA软件进行二次开发,在水下平台三维建模基础上,编制静水力和重量重心计算程序,可直接计算、获取静水力要素并实现重量重心的自动统计,达到计算的自动化、程序化和数据的及时更新,提升设计手段,对潜艇、潜器等水下平台设计中控制浮态、稳态具有重要作用,工程应用价值较高。     

大型船舶辅机尾气排放测试系统研究

船舶在岸时电力供应主要来源于船舶辅机,因此在岸船舶尾气排放来自于船舶辅机,目前船舶排放相关研究多集中于船舶排放清单,对船舶实际航行中实际排放测试研究较少,船舶辅机实际排放也没有引起重视。该文通过对测试仪器的选型以及测试系统的搭建,构建出一套检测大型船舶辅机尾气排放的PEMS( 车载排放测试系统);在实际船舶辅机排放测试中测得某在岸船舶在300kw和600kw两个工况下NOX,CO,CO2以及颗粒物的排放特性,并对测试工况对排放特征的影响进行了分析。     

直升机舰上起降安全的影响因素研究

舰载直升机的起降安全涉及到舰机两方面,且影响因素较多。本文首先对舰载直升机起降安全因素进行了系统分析,梳理了其关键影响因素舰船空气流场中各特性参数对直升机操作性能的影响。然后介绍了用于舰船空气流场测量的三种典型方法,对舰船空气流场的深入研究有重要指导意义,并可为机舰动态配合研究提供参考。     

AFE变频驱动技术在科考船上的应用研究

为获得优越的操纵性能,科考船往往采用大功率变频装置来驱动电力推进系统。与此同时,科考船电站装机容量普遍较小,电力推进系统负荷占比高,变频装置的引入会引起电网电源品质的下降,严重时会影响其他电气设备的正常工作。对此,应结合船舶实际情况,将作为上述问题解决方案的有源前端(AFE)技术,纳入到统一的工程应用研究范畴,掌握工作原理,摸清技术优势,对于潜在的技术风险点,需提出针对性解决措施。     

Incorporating the extended theory of planned behavior in a school travel mode choice model: a case study of Shaoxing,China

Travel to and from school can have social, economic, and environmental implications for students and their parents. Therefore, understanding school travel mode choice behavior is essential to find policy-oriented approaches to optimizing school travel mode share. Recent research suggests that psychological factors of parents play a significant role in school travel mode choice behavior and the Multiple Indicators and Multiple Causes (MIMIC) model has been used to test the effect of psychological constructs on mode choice behavior. However, little research has used a systematic framework of behavioral theory to organize these psychological factors and investigate their internal relationships. This paper proposes an extended theory of planned behavior (ETPB) to delve into the psychological factors caused by the effects of adults’ cognition and behavioral habits and explores the factors’ relationship paradigm. A theoretical framework of travel mode choice behavior for students in China is constructed. We established the MIMIC model that accommodates latent variables from ETPB. We found that not all the psychological latent variables have significant effects on school travel mode choice behavior, but habit can play an essential role. The results provide theoretical support for demand policies for school travel.     

Model Test on Grouting Law in Dynamic Water-Rich Sand Layers by the Electric Resistance Method北大核心CSCD

In order to study the diffusion law of grouting slurry in the water-rich sand layer under flowing water conditions, a grouting test model consisting of a main test system, a grouting system, and a measurement system was developed. And for detecting the diffusion scope of the grouts, a new resistivity method was proposed. It is found that the relationship between grouting pressure and grouting rate during the test is strong. Under hydrodynamic conditions, the grouting slurry diffuses elliptically. Due to gravity and the effect of the upper water flow, the center of gravity of the ellipsoid is below the grouting outlet, and the grouting effectively improves the physical and mechanical properties of water-rich sand bodies. At the same time, the resistivity method has a good application effect on the detection of grouting diffusion range. The range of slurry diffusion obtained by the resistivity method is basically consistent with the boundary of the stone body after excavation, indicating that the resistivity method is reliable for detection of grouting range in dynamic water-rich sand layer. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis of Ground Response and Structure Stress Induced by PBA Method北大核心CSCD

The application of prefabricated tunnel technology has been become a new research field both in China and abroad. Based on the running tunnel between Yufuhe station and Wangfuzhuang station of Jinan rail transit line R1, a new prefabricated tunnel construction technology, the PBA method is presented. This paper makes a detailed discussion on section form, supporting scheme and construction process of the PBA method. In this study, 3D a new 3D numerical model for PBA method is presented by finite difference numerical simulation software Flac and the construction processes are modeled. The rule of ground surface settlement, ground deformation and structural stress caused by PBA method is studied in detail. Results show that the structure of PBA method can effectively control the deformation magnitude and scope. Stress concentration appears at the prefabricated connection parts and the reinforcement needs to check. The total assembled structure forms the load-bearing system after the completion of the lateral wall. The built-in depth of the precast pile and pile bottom grouting quality should to be ensured to control the displacement of the precast piles. The results of this study will be a useful reference for similar projects in the future. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.