Real-Time Fault Diagnosis for Gas Turbine Blade Based on Output-Hidden Feedback Elman Neural Network

In order to remotely monitor and maintain large-scale complex equipment in real time, China Telecom plans to create a total solution that integrates remote data collection, transmission, storage, analysis and prediction. This solution can provide manufacturers with proactive, systematic, integrated operation and maintenance service, and the data analysis and health forecasting are the most important part. This paper conducts health management for the turbine blades. Elman neural network, and improved Elman neural network, i.e., outputhidden feedback (OHF) Elman neural network are studied as the main research methods. The results verify the applicability of OHF Elman neural network.     

Fast Ferry Smoothing Motion via Intelligent PD Controller

A novel type of control law was adopted to reduce the vertical acceleration of a fast ferry as well as the motion sickness incidence suffered by the passengers onboard by means of a submerged T-foil. Considering the system changing characteristics under high disturbances, a model-free approach was adopted. In addition, an upgraded proportional-derivative (PD) controller with correction terms resulting from a fast-online estimation of the system dynamics was designed. The overall controller, known as intelligent PD (i-PD) controller, was tested, and the obtained results were compared with those of a classic PD controller. The controllers were also tested in a changing environment and at different operating velocities. The results confirmed the effectiveness of the i-PD controller to smooth the motions with low computational cost control schemes. Furthermore, thanks to ability of the i-PD controller to continually update the estimated dynamics of the system, it showed a better reduction in both vertical motions and the seasickness level of the passengers with the needed robustness under external disturbances and system changing parameters.     

柴油机增压器包覆层隔声性能试验分析及优化设计

提出一种船用增压器的包覆层结构,其内层为绝热材料和吸声材料,外层为金属薄片。采用统计能量法(SEA)建立该结构的中高频段隔声数值模型,开展包覆层的隔声试验,隔声量实测值与仿真结果吻合较好,能验证数值建模的有效性。对包覆层的吸声材料的厚度、密度和流阻等参数进行优化设计,利用正交试验法设计数值试验组,采用极差和方差分析法分析影响材料隔声性能的关键因素,得出最重要的影响因素是材料厚度,在选型设计中还应考虑密度和流阻因素。当安装厚度受限时,可通过改变密度和流阻值来提高材料的隔声量。     

小管径垂直管水下排气完全携带点实验及分析

船用柴油机采用水下排气方式具有降低排气噪声、改善舱外空气质量等优点,在大型豪华游轮等特殊船舶中具有广泛应用前景。为防止海水由排气管倒灌入柴油机造成事故,需弄清水下排气管内水倒流发生的条件。对大管径垂直管防止水倒灌临界条件即完全携带点的已有认识较为统一,而对小管径垂直管仍未有清晰的认识。在管径25~100 mm范围对垂直管的完全携带点进行了实验,探究了小管径垂直管的完全携带点预报方法。实验结果表明在小管径范围,垂直管完全携带点对应的临界表观气速随管径增大而升高,但气相Wallis数随管径增大而减小,说明Wallis数过度关联了管径对临界表观气速的影响。基于气相Kutateladze数和无量纲气相黏性,对小管径垂直管提出了新的完全携带点预报模型和相应实验关联式。     

深圳地铁永磁同步牵引系统研究分析

牵引传动系统是轨道交通车辆装备实现机电能量转换的“心脏”单元,其性能在某种程度上决定轨道交通车辆的动力品质、能耗和控制特性,是轨道交通车辆节能升级的关键系统。而永磁同步牵引系统以其高效率、高可靠性和低能耗的优势特点,受到轨道交通行业的密切关注。文章阐述深圳地铁10号线永磁同步牵引系统批量装车概况,重点分析永磁同步牵引系统组成及优势,指出推广应用永磁同步牵引系统的经济和社会效益显著。     

Collision avoidance path planning in multi-ship encounter situations

Journal of Marine Science and Technology - Collision avoidance path planning is still one of the essential problems in the design and application of an intelligent maritime navigation system. Its...     

A Pareto-improving hybrid rationing and pricing policy with multiclass network equilibria

This paper extends the work on Pareto-improving hybrid rationing and pricing policy for general road networks by considering heterogeneous users with different values of time. Mathematical programming models are proposed to find a multiclass Pareto-improving pure road space rationing scheme (MPI-PR) and multiclass hybrid rationing and pricing schemes (MHPI and MHPI-S). A numerical example with a multimodal network is provided for comparing both the efficiency and equity of the three proposed policies. We discover that MHPI-S can achieve the largest reduction in total system delay, MHPI can induce the least spatial inequity and MHPI-S is a progressive policy which is appealing to policy makers. Furthermore, numerical results reveal that different classes of users react differently to the same hybrid policies and multiclass Pareto-improving hybrid schemes yield less delay reduction when compared to their single-class counterparts.     

扩底抗拔桩极限承载力半经验半理论计算方法与试验验证

文章考虑了土体力学特性,以及桩身材料性质、桩长与桩径(含扩底直径)、桩顶埋深、桩顶卸载与加载、群桩效应等诸多因素的影响,结合工程经验给出了计算扩底抗拔桩极限承载力的半经验半理论方法;根据扩底抗拔桩破坏面位置不同,将扩底抗拔桩破坏模式分为三类(即破坏面延伸至地表的整体剪切破坏、破坏面介于地表与扩孔段之间的局部剪切破坏与破坏面位于扩孔段附近的冲剪破坏),推导出了整体剪切破坏模式的极限平衡状态方程;并依据扩底抗拔桩轴对称条件与土体抗拉强度小的力学特征,给出了求解整体破坏面的微分筒数值解法;利用经验法估算了局部剪切破坏、冲剪破坏模式下的端阻力,进而给出了任意土层中扩底抗拔桩承载力计算步骤与方法;最后,结合一足尺试验的计算分析与承载力测试比较,验证了计算方法的可靠性与精确度。     

软岩大变形隧道围岩分级及支护参数适宜性探讨

兰渝线兰广段通过板岩、碳质板岩等软岩区段的隧道极易发生大变形.在现场工程实践和试验的基础上,文章对该区段地质条件的特殊性进行了分析,并对目前隧道围岩基本分级及在施工过程中的设计变更修正进行了阐述,着重对软岩大变形隧道的围岩分级标准和选用支护参数的适宜性进行了探讨,以期能为今后同类工程提供参考和借鉴.     

城市公交线路模态工况构建方法研究

采用GPS设备对西安城市公交典型线路的运行工况进行实测,分别运用瞬态转模态方法和多目标优化法构建出城市客车模态工况.以8个特征参数相对误差为标准,对两种方法的精度进行了对比研究.研究表明,两种方法均能有效地完成工况构建,其中多目标优化法精度最高,瞬态转模态方法简单快捷,从而为工况构建方法的选取提供了思路和数据验证.