试验模态分析技术在车辆降噪中的应用

利用试验模态分析技术对某款轿车的白车身进行了试验分析,根据模态试验结果对该车车内噪声进行预测后,对白车身进行了优化.白车身优化前、后车辆的噪声测试结果表明,相对于优化前车辆,白车身优化后车辆的车内噪声降低了约3 dB(A),尤其是在50～100Hz频段内的低频噪声降低较多,使车内的声品质得到了较大改善.     

Experimental study of the airside performance for interrupted fin-and-tube heat exchanger with hydrophilic coating under dehumidifying conditions

The airside heat transfer and friction characteristics of seven interrupted fin-and-tube heat exchangers with hydrophilic coating under dehumidifying conditions are experimented. The effects of number of tube rows, fin pitch and inlet relative humidity on airside performance are analyzed. The test results show that the influence of fin pitch on the friction characteristic under dehumidifying conditions is similar to that under dry surface, and the friction factors decrease slightly with the increase of number of tube rows. The heat transfer performance decreases as fin pitch and number of tube rows increases. The heat transfer performance and the friction characteristic are independent of inlet relative humidity. Based on the test results, heat transfer and friction correlations in terms of the Colburn j factor and Fanning f factor, are proposed to describe the airside performance of the interrupted fin geometry with hydrophilic coating under dehumidifying conditions. The correlation of the Colburn j factor gives a mean deviation of 9.7%, while the correlation of the Fanning f factor shows a mean deviation of 7.3%.     

运动可逆式引信安全系统逻辑控制分析

针对传统引信安全与待发状态控制的不可逆问题,提出了一种运动可逆式引信安全系统。这种安全系统在解除保险和隔爆后利用遥控装置发出的指令信息完成恢复保险及隔爆,具有较高的安全性和可靠性。分析结果表明：运动可逆式安全系统能实现＂安全的人工失效＂,其安全性要远高于传统不可逆式安全系统;可对机构工作过程多次检测和故障定位。适用于低发射过载的高价值弹药引信。     

时变耦合对含相位阻尼J-C模型线性熵的影响

在腔场为相干态场,原子处于等概率叠加态的初始条件下,采用色散近似方法,研究了存在相位耗散且含与时间成正比变化的场-原子耦合的Jaynes-Cummings模型的线性熵演化特征.数值计算结果表明,与常系数耦合相比较,时变耦合不改变原子和腔场复合系统的线性熵的时间演化,但破坏原子线性熵及场线性熵的振荡周期性.在系统演化初期,时变耦合抑制并延迟原子和场相干性的丢失.耦合系数突变会显著提高子系统线性熵的振荡频率.     

三自由度平面并联机器人误差分析

为了研究各种误差对并联机器人输出产生的影响,以三自由度平面并联机器人为例,利用并联机器人的环路特性,采用机器人微分理论,建立了误差正向模型.通过M atlab编程和计算机仿真,得出输出误差与机器人结构尺寸变化、位置和姿态变化的关系图.为该类型机器人的设计、制造、装配提供了指导依据.     

确定性联合补充库存问题的EXCEL规划求解法

提出求解确定性联合补充库存问题的新方法——EXCEL规划求解法：通过数学运算将非线性混合整数规划模型转化为整数线性规划模型,然后在EXCEL中通过“规划求解”工具求最优解．通过算例验证,结果表明该方法不但能有效解决此类问题,而且更简单、更直观、更实用．     

燃料电池轿车储氢系统固定方式正面碰撞分析

针对燃料电池轿车利用有限单元方法建立正面碰撞分析模型,分析正面碰撞过程中车载储氢系统安装结构的固定效果.在分析的基础上提出改进方案,改善了固定效果.     

Outlier mining based abnormal machine detection in intelligent maintenance

Assessing machine’s performance through comparing the same or similar machines is important to implement intelligent maintenance for swarm machine. In this paper, an outlier mining based abnormal machine detection algorithm is proposed for this purpose. Firstly, the outlier mining based on clustering is introduced and the definition of cluster-based global outlier factor (CBGOF) is presented. Then the modified swarm intelligence clustering(MSIC) algorithm is suggested and the outlier mining algorithm based on MSIC is proposed. The algorithm can not only cluster machines according to their performance but also detect possible abnormal machines. Finally, a comparison of mobile soccer robots’ performance proves the algorithm is feasible and effective.     

Comparison of coal-based dimethyl ether and diesel as vehicle fuels from well to wheel in China

With life cycle assessment (LCA) methodology, a life cycle model of coal-based vehicle fuels (CBVFs) including coal-based dimethyl ether (CBDME) and coal-based diesel (CBD) is established. Their primary energy consumption (PEC) and global warming potential (GWP) from well to wheel including feedstock extraction, fuel production, fuel consumption in vehicle and energy transportation are calculated and compared. Results show that the life cycle PEC and GWP of CBD pathway are 1.17 and 1.34 times as CBDME pathway. Based on the above results, CBDME will become a choice with great potential to replace conventional petroleum-based diesel (CPBD) in China.     

未定式“1^∞”型的一个简便方法

本文对重要极限lim x→0（1＋x）1/x的另一种判别法进行论证,然后将此判别法运用到求解极限未定式＂1^∞＂型这类难度较大的题型中去,通过比较,论述,这种判别法给出的计算方法简便易行,从而解决了教学中的一大难点,具有较好的实用性。