略谈高速公路服务区的建筑节能

从建筑节能的角度,探讨高速路服务区的节能减排,倡导在今后服务区建设和改扩建中树立并积极推行绿色建筑理念,着重从节水方面提出了相关的措施和建议。     

含缺陷管道悬空状态下的有限元建模

地质灾害情况下,管道容易产生大变形和失效,造成重大事故,因此,研究地质灾害中管道的建模与应力计算,具有重要的工程意义.通过力学与有限元的结合,利用ANSYS工程软件建立管道在悬空状态下的大变形有限元模型.为考虑土壤地基的影响,采用弹簧来模拟地基对管道的反作用.根据材料力学计算分析,得出比较合适的弹簧间距,并验证了该模型的合理性.对于含缺陷的管道,运用子模型技术进行处理.建模完成后,用一组具体的管道参数进行实例分析,利用ANSYS后处理命令计算管道上的最大应力及其应力分布.     

轴对称解对隧道衬砌水压力计算的适用性研究

文章根据渗流理论推导了隧道衬砌水压力的轴对称解,并利用数值分析方法研究了轴对称解对不同形状隧道断面与浅埋隧道的适用性.研究结果表明:轴对称解适用于非圆形隧道断面衬砌水压力的估算;隧道断面形状对衬砌水压力折减系数的影响较小,可以忽略不计,其影响大小主要由衬砌与围岩的渗透系数比值决定.对于浅埋低水头隧道,用轴对称解计算的毛洞流量Qm与数值解比较,其误差较大,最大误差为36.5％;但用来计算衬砌水压力p1以及衬砌后水流量Q1时,误差相对较小,最大误差为6.3％,特别是利用轴对称解得出的衬砌水压力值与利用数值解得出的衬砌水压力特征值最大误差仅为3.4％.     

Ridership drivers of bus rapid transit systems

We have collected information on 46 bus rapid transit (BRT) systems throughout the world to investigate the potential patronage drivers. From a large number of candidate explanatory variables (quantitative and qualitative), 11 sources of systematic variation are identified which have a statistically significant impact on daily passenger-trip numbers. These sources are fare, headway, the length of the BRT network, the number of corridors, average distance between stations; whether there is: an integrated network of routes and corridors, modal integration at BRT stations, pre-board fare collection and fare verification, quality control oversight from an independent agency, at-level boarding and alighting, as well as the location of BRT. The findings of this paper offer important insights into features of BRT systems that are positive contributors to growing patronage and hence should be taken into account in designing and planning BRT systems.     

A mixed Bayesian network for two-dimensional decision modeling of departure time and mode choice

The modeling of travel decision making has been a popular topic in transportation planning. Previous studies focused on random-utility discrete choice models and machine learning methods. This paper proposes a new modeling approach that utilizes a mixed Bayesian network (BN) for travel decision inference. The authors use a predetermined BN structure and calculate priori and posterior probability distributions of the decision alternatives based on the observed explanatory variables. As a “utility-free” decision inference method, the BN model releases the linear structure in the utility function but assumes the traffic level of service variables follow multivariate Gaussian distribution conditional on the choice variable. A real-world case study is conducted by using the regional travel survey data for a two-dimensional decision modeling of both departure time choice and travel mode choice. The results indicate that a two-dimensional mixed BN provides better accuracy than decision tree models and nested logit models. In addition, one can derive continuous elasticity with respect to each continuous explanatory variable for sensitivity analysis. This new approach addresses a research gap in probabilistic travel decision making modeling as well as two-dimensional travel decision modeling.     

安全水平法在SOLAS 救生艇结构强度衡准制定中的应用

本文将安全水平法应用于SOLAS第III章救生艇结构强度衡准的制定。主要采用综合安全评估对救生艇结构强度相关的功能性要求进行衡准的初步制定,从而得出需要的安全水平。基于强度衡准理论分析、实艇试验和事故数据分析相结合的方式评估了现有救生艇结构强度的安全水平,对衡准的合理性提出修改的建议。研究结果为安全水平法在船舶技术标准制定和安全水平评估方面的应用提供了实际案例和使用建议。     

On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Li-O_2(Air)电池研究进展

随着社会的发展,人们越来越需要绿色节能的储能电源。高比能量的Li-O2(Air)电池逐渐受到人们的关注。本文从Li-O2(Air)电池体系和电池阴极两方面入手,对近年来在电解液、炭载体、催化剂方面取得的突破性进展进行介绍,并对研究方面存在的科学问题进行了介绍,指出了该电池发展过程中需要解决的关键科学问题。     

路面热再生技术在养护施工中的推广意义

本文通过对公路养护工程具体施工方式的研究,简明扼要的分析了热再生技术在施工现场的施工方式。大量工程实际经验总结得出,路面的现场热再生技术可以大大提高原有路面沥青材料的利用率,提高经济效益的同时,资源得到了重复利用,且由于热再生技术在施工时,不会对环境造成影响,故而该技术的推广更有利于环保。     

深海拖曳系统自稳定二级拖体姿态控制研究

二级深拖系统具有可控性强、母船扰动弱等优点,是重要的海洋探测平台。在实际工作中,二级拖体姿态稳定是保证探测数据准确的基本前提。本文以具有自主调节功能的二级拖体为例,对其姿态控制进行研究。首先建立了二级拖缆的“弹簧——阻尼”模型,并在此基础上建立了二级深拖系统的数学模型。其次根据该系统具有非线性、时变性等特点,设计了具有参数自修正功能的模糊自适应PID控制器,以实现在不同工况下对二级拖体的姿态进行控制。仿真结果表明,未加载控制器时,海况变化对拖体姿态有显著影响,其俯仰角和横滚角均会发生大范围波动。加载模糊自适应PID控制器后,拖体通过自主调节,能够使姿态波动控制在较小范围,从而满足工作要求,验证了拖缆数学模型的正确性和所采用的控制方法的可行性。