移动闭塞系统区间通过能力分析及参数计算

移动闭塞条件下“闭塞分区”呈现出“移动”和“长度变化”的特征,其区间通过能力的计算较固定闭塞系统更加复杂。本文建立了移动闭塞系统区间通过能力的数学模型,对区间通过能力与列车追踪运行速度、跟驰车距和列车性能等参数之间的相互关系进行了定性、定量分析,并就关鍵参数的计算方法进行了深入的讨论,对移动闭塞条件下的列车运行控制与行车组织有一定的参考价值。     

压载水旋流预处理单元的优化设计与数值模拟

压载水管理公约D2对压载水中颗粒物粒径范围及含量做出了明确规定。为满足此规定,水力旋流器逐步开始应用于船舶压载水处理系统中。为了提高水力旋流器的分离效率,通过改变水力旋流器的入口结构对水力旋流器进行优化,即将入口结构设计为阿基米德螺线形入口来增加流体转动速度,降低能量消耗,从而提高分离效率。应用Fluent软件,结合雷诺应力模型(RSM)和混合多相流(Mixture)分析方法,对优化前、后的水力旋流器进行固-液两相流数值模拟。模拟内容包括水力旋流器内的速度分布、固相体积分数分布以及分离效率等。通过对比2种模型的模拟结果,说明优化的水力旋流器内部的流场速度以及分离效率均有一定的提高,达到了优化目的。     

论经济新常态下交通运输行政执法体制改革

交通运输是国民经济基础性行业,经济新常态下改革交通运输执法体制是贯彻中央全面深化改革、全面依法治国方针的内在要求,是消除执法体制机制弊端、根治执法乱象、破解交通运输发展瓶颈的有效途径,改革的主要内容和目的主要有整合职能、精简机构、核定编制、保障经费四个方面。改革中市辖区不设置执法机构,市管公路治超站移交县级管理,妥善进行富余人员转岗分流,要制定配套政策、采取措施保障改革顺利进行,处理好改革与稳定的关系,做到改革与治理两不误。     

基于下游大水位变率的下水式垂直升船机随动技术的设计与实现

下游航道水位变率大,快速适应水位变化的准确停位随动技术,对下水式升船机的传动控制很重要.本文介绍下水式垂直升船机随动控制技术.首先,对控制对象的特性进行分析,描述了系统的速度运行曲线,对位置控制功能进行了研究.然后,搭建试验平台对本控制方案的性能进行了测试,给出了测试的方法和试验结果.实验结果表明本控制系统具有定位精度高、响应速度快等优点,能够适应下游大水位变化率的下水式垂直升船机准确停位要求.     

利用信息化工具优化公路工程计量支付管理

结合沿海高速公路2013年养护专项部分收费站改扩建工程机电施工项目,对建设部颁布的机电工程清单的计量支付管理工作的主要步骤进行了详细的阐述。     

A proposed vision and vehicle-to-infrastructure communication-based vehicle positioning approach

It is essential to obtain accurate location of vehicles for new applications of Intelligent Transportation Systems. To remedy the defects of present Global Positioning System and vehicle-to-infrastructure (V-I) positioning technology, a new positioning approach based on vision and V-I communication is proposed. This approach aims at lane-level positioning with lower cost than conventional ones. In this approach, the position of the vehicle is represented by its lateral position (the lane number) and longitudinal position (the distance from entrance of the road) in a course coordinate system along the road; the specific lane the vehicle is occupying (the lane number) can be judged using the information of lane lines detected by vision systems; then the distance to the vehicle is obtained by a Road Side Unit (RSU) during the V-I communication; and the longitudinal position is calculated. The error of the approach on typical operating conditions is analyzed, indicating that the new approach can achieve the accuracy of less than 0.31 m for straight road and 0.58 m for typical arc road with ultra-wideband communication and ranging technologies and rational arrangement of RSUs. The feasibility of this approach is presented.     

Approximate optimal AUTOSAR software components deploying approach for automotive E/E system

The AUTOSAR has been developed as the worldwide standard for automotive E/E software systems, making the electronic components of different suppliers to be employed universally. However, as the number of component-based applications in modern automotive embedded systems grows rapidly and the hardware topology becomes increasingly complex, deploying such large number of components in automotive distributed system in manual way is over-dependent on experience of engineers which in turn is time consuming. Furthermore, the resource limitation and scheduling analysis make the problems more complex for developers to find out an approximate optimal deploying approach in system integration. In this paper, we propose a novel method to deploy the AUTOSAR components onto ECUs with the following features. First, a clustering algorithm is designed for deploying components automatically within relatively low time complexity. Second, a fitness function is designed to balance the ECUs load. The goal of our approach is to minimize the communication cost over all the runnable entities while meeting all corresponding timing constraints and balancing all the ECUs load. The experiment results show that our approach is efficient and has well performance by comparing with other existing methods in specific and synthetic data set.     

Effects of rosiglitazone on rabbit atherosclerosis

We sought to validate magnetic resonance imaging(MRI) for documenting the effects of rosiglitazone on rabbit atherosclerosis and the possible mechanism by treatment on the lesions.24 New Zealand white rabbits were randomly divided into normal group, control group and treatment group.After 4 weeks, all rabbits underwent MRI.After examination, the number of circulating endothelial progenitor cells(EPCs) and level of lipid, glucose, nitric oxide(NO) and superoxide anion(O-2·) were measured.MRI demonstrated the regression of atherosclerotic lesions by rosiglitazone which has good correlation with histopathology.Treatment not only increased the level of EPCs and NO, but also raised the ability of inhibition of O2-·.MRI is a promising noninvasive technology to detect the effects of therapeutic interventions.Rosiglitazone slows the progression of atherosclerosis that may in part attribute to its improvement of mobilization of EPCs and the reduced oxidative stress.     

Apoptin原核表达载体的构建及在大肠杆菌中的表达

目的构建Apoptin的原核表达载体,并制备抗原物质Apoptin融合蛋白。方法在获得Apoptin融合基因的基础上,成功构建了Apoptin的高效原核表达载体pET-28a( )-Apoptin,将该质粒转化至大肠杆菌E.coliBL21(DE3)受体菌中,以IPTG对其进行诱导表达,聚丙烯酰胺凝胶电泳分析目的蛋白。结果转化有Apoptin的原核表达载体pET-28a( )-Apoptin的大肠杆菌E.coliBL21(DE3)经IPTG诱导后,经SDS-PAGE分析,在相对分子质量约17 000的位置出现目的蛋白条带,大小与Apoptin融合蛋白一致。结论Apoptin原核表达载体pET-28a( )-Apoptin能够表达出Apoptin融合蛋白,为进一步的Apoptin研究和制备Apoptin抗体奠定了基础。