沥青混凝土高温摊铺对混凝土箱梁桥的影响研究

该文在实测数据的基础上,通过有限元热-应力耦合计算,对影响沥青混凝土摊铺所形成的温度梯度的各种参数进行了分析,在此基础上提出了沥青混凝土摊铺所引起的截面上最不利温度梯度的简化模式,可以为沥青混凝土摊铺所引起的截面应力的计算提供参考,最后对防止沥青混凝土高温摊铺引起裂缝的措施提出了一些建议。     

GMAW(STT)和AUTO-FCAW组合焊接与GTAW+FCAW组合焊接对比试验

为分析管子对接焊半自动焊接工艺(手工GMAW(STT)和自动FCAW组合)的优劣,本文介绍了该半自动工艺与传统G TAW和F C AW手工组合焊接工艺的对比试验.对比分析两种焊接工艺的焊接质量、效率、人员工作强度等.为后续推广管子对接焊缝GMAW(STT)和自动FCAW组合焊接奠定基础,对推进高效焊、自动焊的应用有一定...     

Biocompatibility evaluation of polyethylene terephthalate artificial ligament coating hydroxyapatite by fibroblasts cells in vitro

Hydroxyapatite (HA) based materials have been widely used in the field of ligament tissue engineering in the past decades. It has been previously reported that HA can increase the penetration of marrow-derived mesenchymal stem cells (MSCs) and MSCs cells into scaffolds due to increased cell differentiation in biological media. Additionally, it was found that there are much difference between MSCs and anterior cruciate ligament (ACL) cells. For that reason, we mainly evaluate the biocompatibility of polyethylene terephthalate (PET) silk scaffold with fibroblasts cells in vitro. We cultured mouse fibroblasts cells on the substrate of PET fiber and PET-HA scaffold, respectively, and then observed the morphology by using scanning electron microscopy. Our data indicate that PET-HA scaffold has good biocompatibility with fibroblasts cells and can potentially be useful in enhancing the fibroblasts cell differentiation and proliferation.     

公务车税收政策对出行行为的影响

通过对以色列的案例研究,探讨了公务车税收政策对出行行为的影响.以色列的公务车经历了大规模的增长,对公务车的税收政策也进行了一系列调整.调查400名拥有公务车的员工和230名只有一辆私人汽车的员工,结果显示,公务车对出行行为产生了显著影响,不利于交通的可持续发展.公务车税收政策及其实践带来了相当多的额外行驶里程,并刺激员工整个家庭使用公务车出行.公务车税收政策的调整及公司政策的变化,可能会显著影响员工拥有公务车的意愿,并改变其出行行为.     

Research on Spatially Adaptive High-Order Total Variation Model for Weak Fluorescence Image Restoration

Photoacoustic imaging acquires the absorption contrast of biological tissue with ultrasound resolution. It has been broadly investigated in biomedicine for animal and clinical studies. Recently, a micro-electro-mechanical system (MEMS) scanner has been utilized in photoacoustic imaging systems to enhance their performance and extend the realm of applications. The review provides a recap of recent developments in photoacoustic imaging using MEMS scanner, from instrumentation to applications. The topics include the design of MEMS scanner, its use in photoacoustic microscopy, miniature imaging probes, development of dual-modality systems, as well as cutting-edge bio-imaging studies.     

桥梁高桥墩(台)分段搭接浇筑施工方法

桥梁高桥墩(台)分段浇筑时,相邻段竖向接缝容易形成错台和不直顺,影响桥梁整体美观。采取在模板顶端内侧镶嵌木条施工,可有效避免错台和接缝不直顺现象,对提高桥墩(台)尤其是清水模板桥墩(台)外观质量效果明显。     

真空预压施工质量控制要点与常见问题的应对措施

真空预压软基加固技术已渐趋成熟并得到广泛应用,真空预压施工中的质量控制是决定整个软基加固工程质量的关键。结合多年来积累的真空预压软基加固施工经验并参考相关文献,阐述真空预压施工质量控制的要点,针对施工中常见的工程质量问题提出应对措施．可供同类工程参考。     

级联系统变换器阻抗分析与稳定性改善方法研究

在级联系统稳定性判据基础上,分析级联系统前后级模块的阻抗比关系,讨论了LC滤波电路对后级负载输入阻抗的影响及其对级联系统稳定性的改善作用,介绍了电流源扰动注入法测试级联系统稳定性的方法,通过实验验证LC滤波电路对级联稳定性的改善作用.     

浮式平台水下电缆（立管）快速解脱及存储技术研究

以流花11—1平台生产立管系统解脱为例,介绍平台立管系统解脱的新方法及创新技术。提出新的施工方案,并将电缆密封装置、电缆（立管）防弯等新技术引入到施工中,使得电缆（立管）解脱所花的时间较常规方法缩短一半以上。     

普通干线公路监测工作的安全管理研究

对普通干线公路监测工作事故的成因进行了分析,得出影响监测工作安全的五大主要风险因素即人、设备、基础设施、环境、管理.然后利用解释结构模型(ISM)、系统化的建模技术和计算机工具对这五大风险因素间的逻辑关系进行了运算和分析,并由此建立了描述影响普通干线公路监测工作安全的多级递阶解释结构模型.在此基础上,利用风险矩阵法对普通干线公路监测工作中的各个风险源进行了评价并确定了风险等级.最后针对不同的风险等级,依据风险控制原则,对各个风险因素提出了相应的措施和建议,以提高普通干线公路监测工作中的安全管理水平.