帕萨特B5轿车电路--发动机控制系统(续完)

2发动机故障码及其故障码的读取和删除 在发动机控制单元J220内配备了故障存储器，当系统或元件发生故障时，能将故障按相应的故障类型存入故障存储器。用大众汽车专用的故障阅读仪V．A．G1551或车辆系统测试仪V．A．G1552或汽车诊断测试和信息系统V．A．S5051可以读取和删除故障码。下面以故障阅读仪V．A．G1551为例，说明故障码的读取和删除程序。     

帕萨特B5轿车电路-自动变速器控制系统(Ⅰ)

在帕萨特B5轿车布线图的基础上改画成该车电路原理图——自动变速器控制系统,并介绍该系统的主要功能,自动变速器故障码及其读取方法,自动变速器测量数据块及其读取方法。     

回收粉在环氧沥青混凝土中的应用研究

大跨径钢桥面铺装用环氧沥青混凝土对集料有很高的要求。通过室内试验和实际生产验证。分析环氧沥青混凝土生产中使用回收粉的可行性，并结合具体工程给出使用量。     

老化因素对沥青性能的影响

通过SHRP试验，分析沥青在老化过程中，各因素(时间、温度、氧、水)对其高、低温性能的影响，从而为沥青的再生提供依据。     

Tool for Predicting the Ultimate Bending Moment of Ship and Ship-Shaped Hull Girders

The present paper presents a historical review associated with the research works on hull girder strength of ship and ship-shaped structures. Then, a new program is developed to determine the ultimate vertical bending moment of hull girder by applying direct method, stress distribution method, and progressive collapse analysis method. Six ships and ship-shaped structures used in the benchmark study of International Ship and Offshore Structures Congress (ISSC) in 2012 are adopted as examples. The calculation results by applying the developed program are analyzed and compared with the existing results. Finally, the roles of the developed program and its further development are discussed.     

横浪海况下"蓝鲸"号起重船吊装上部组块运动响应研究

"蓝鲸"号起重船舶在海上吊装大型上部组块施工过程中,有时受现场条件限制,会出现横浪吊装作业工况,此时组块运动容易偏大,威胁作业的安全,甚至造成设备损坏和人员伤亡事故.本文针对横浪-系泊系统-起重船-吊缆-上部组块复杂耦合系统,开展了数值模拟研究工作,分析吊装组块的运动响应规律和特性.将规则波中运动响应预报结果与水池模型试验结果进行了对比分析,验证了数值模拟的合理性及其精确性,揭示了起重船和吊物的耦合运动机理.针对典型横浪不规则波工况,开展了运动响应预报,并和Noble Denton相关衡准进行了对比,给出了允许施工作业工况的建议.     

舰艇编队信息融合中模糊C-均值算法改进研究

在分析舰艇编队信息处理融合的基础上,提出舰艇编队信息融合体系结构、模型和实现框架。针对原C-均值算法在处理数据时的不合理性,提出了改进的模拟C-均值算法,提高分类效果,满足信息融合的实时要求和可靠性要求。     

STX1(2)型驮背多功能运输车超偏载检测标准

分析了STX₁₍₂)型驮背多功能运输车对既有超偏载检测方法和标准的适应性,提出了该车的超偏载检测方案,明确了公路货车或半挂车超偏载的检测方法及评判标准。     

Analysis of the effectiveness of control measures to mitigate road dust emissions in a regional network

The effectiveness of control measures to reduce road dust emissions is analyzed using a year’s data of road dust emissions collected with a mobile sampling platform and a survey of road maintenance practices in the Lake Tahoe Basin of Nevada and California US. Attributes such as sweeping practices, anti-icing, shoulder improvement, pavement condition, trackout, and abrasive material from road segments were analyzed with a feature subset selection algorithm. Street sweeping was found to be an effective means of controlling dust emissions from roads. Road dust from dirty tertiary roads served as a continuous source of suspendable material for adjacent high-speed roads in the winter time. To be most effective, emission control strategies require that not only primary roads, but all roads be swept after snow storms to recover applied abrasive material.     

基于FPGA的单端行波故障测距系统的设计与实现

针对现有的10 k V输电线单端行波故障测距理论,提出了一种基于Cyclone IV系列FPGA芯片EP4CE15F17C8N的软硬件实现方案。采用FPGA自顶向下模块化思想,设计了行波故障测距系统,采用AD7356进行高速数据采集,通过改进的凯伦鲍尔矩阵进行相模变换,用FIR滤波器IP核进行小波变换求模极大值,最后根据模极大值的极性选择测距公式计算故障距离。通过时序仿真和板级测试表明,该方案设计时序稳定,且定位精度高、实时性强。