三段式转向管柱等速性优化

汽车转向管柱的等速性是影响整车操纵性能的重要因素之一。由于受转向管柱布置空间限制,其传动等速性较难保证。本文分析采用十字轴式万向联轴器的转向管柱等速性影响参数,并通过对某轻型客车三段式转向管柱的等速性优化,阐述优化的过程和方法;最后对比优化前后方向盘转动力矩波动值,验证优化方法的正确性。     

基于同伴教学法的翻转课堂的思考和实践——以高职《会计信息化》课程为例

会计信息化课程是高职会计专业的一门强调动手能力的核心课程,面对如今时兴的翻转课堂教学模式,笔者首先分析了翻转课堂模式相比传统教学模式的优势,再解释了当今人们对翻转课堂存在的一些误区,结合自身在会计信息化课程上应用翻转课堂做了具体的经验介绍,从以下三个方面:翻转课前预习利用ARCS模型激发学习动机;教师如何在少讲和多讲间找到平衡点,课堂内化基于同伴教学法;翻转课堂的形成性评价。     

共轨系统多次喷射对船用柴油机性能改进的试验研究

以配备高压共轨燃油喷射系统的柴油机为基础,采用NI测试系统构建了共轨柴油机多次喷射性能试验台架.在此台架上,根据设计优化的喷射策略,开展了柴油机多次喷射对柴油机整机性能影响的试验研究.试验结果表明:利用共轨技术采用多次喷射对柴油机的排温最多下降50℃,噪声最多下降15dB,对碳烟排放也有明显改善.     

Monte Carlo simulation of B2-L2<Subscript>1</Subscript> ordering transitions in Au-Cu-Al alloy systems

The B2-L2₁ ordering transitions in Au-Cu-Al shape-memory alloys are studied by the Monte Carlo exchange simulations, where a set of the first, the second and the third nearest-neighbor mixing potentials for Cu-Al in the Au-Cu-Al alloys are calculated from first principals using the Connolly-Williams methods. To ensure the phase stability of the β-Au-Cu-Al, the investigation includes the range of compositions Au₂Cu_1−x Al_1+x (−0.15 ⩽ x ⩽ 0.15). The B2-L2₁ transition temperatures are predicted, and are in agreement with the experimental results. The atomic ordering around vacancy of the L2₁ structure is further discussed.     

Multi-element ultrasound phased array applicator for the ablation of deep-seated tissue

High-intensity focused ultrasound (HIFU) has attracted increasing interests as a promising noninvasive modality for the treatment of deep tumors in the thoracic and abdominal cavity. A 90-element HIFU spherical phased array applicator operated at 1MHz has been developed for deep tissue ablation. The spherical array with a 5 cm wide central hole has a 21 cm diameter and an 18 cm radius of curvature. Annular element distribution with unequal element spacing is used to reduce the number of elements. The array is constructed with piezoelectric lead zirconate titanate (PZT-8) circular elements that are 1.4 cm in diameter and have a wall with thickness of 0.2 cm. The array offers an effective ablating depth of at least 8 cm in the tissue for both simulations and ex vivo experiments. The simulations demonstrate that the developed array can steer the focus with good quality of intensity distributions up to 6mm off center over ranges from 17 to 21 cm when the water depth is set at 11 cm. We also present the beam focusing capability in deep tissue through a series of ex vivo experiments by measuring discoloration areas after sonications. These results indicate that the developed array is ideal for the ablation of deep-seated tissue.     

Optimization of pellet production process parameters in grate using simulation results

The objective of this paper is to optimize the parameters of pellet drying and preheating process in grate. A mathematical model of drying and preheating is developed, and is verified by the experiments. Further, the operating parameters of wind temperature, wind speed, grate speed and bed depth etc. are investigated through the orthogonal method using the simulation results. And a relationship of drying, preheating effects and operating parameters is achieved. The results show that the optimization effect can be achieved in the given range when air velocity is about 3.0 m/s and temperature is about 300, 500, 800, and 1 100 °C in the updraft drying zone, downdraft drying zone, preheating I zone, and preheating II zone respectively. The work is help for saving energy and reducing emissions in pellet induration.     

An information-based color feature representation and its application in detecting adult images

For many image classification tasks, color histogram is usually employed as an important “signature” to describe the color distribution of the image and infer the image content. However, most traditional color histograms cannot achieve satisfactory results in many image classification systems. In order to improve the accuracy and reduce the computational complexity of the classification task, an information-based color feature representation is proposed in this paper. The mutual information between the feature and the class label is adopted to evaluate the discriminative power of the feature. A novel quantization scheme is presented, which removes the redundant color components and combines the adjacent components together to generate a new feature to maximize the discriminative ability. An iterative algorithm is performed to derive the color space quantization and color feature generation. In order to illustrate the effectiveness of the proposed color representation, a specific image classification task, i.e., differentiating the adult images from benign ones, is employed. Experimental results show that our color feature achieves better classification performance and better efficiency compared with the traditional color histogram.     

Structure-borne sound attenuation at corner interface with dynamic vibration absorber attached

Structure-borne sound attenuation at corner interface of two plates with dynamic vibration absorber attached is investigated by wave approach. Equations governing transmission and reflection coefficients are deduced by introducing some non-dimensional coefficients, which help to reveal the physical sense inside and to simplify the analysis. Numerical investigation on vibration energy transmission of bending wave is carried out as well. The results from measurement and prediction show almost the same trends in the simplified experiment. It is found that energy transmission at corner interface depends greatly on whether the dynamic vibration absorber attached acts at resonance and is relatively lower right after the nature frequency of dynamic vibration absorber. Furthermore, the dynamic vibration absorber attached provides less energy transmission of bending wave than blocking mass at the end of “passing band”.     

Accurate 3D reconstruction of subject-specific knee finite element model to simulate the articular cartilage defects

The biomechanical relationship between the articular cartilage defect and knee osteoarthritis (OA) has not been clearly defined. This study presents a 3D knee finite element model (FEM) to determine the effect of cartilage defects on the stress distribution around the defect rim. The complete knee FEM, which includes bones, articular cartilages, menisci and ligaments, is developed from computed tomography and magnetic resonance images. This FEM then is validated and used to simulate femoral cartilage defects. Based on the obtained results, it is confirmed that the 3D knee FEM is reconstructed with high-fidelity level and can faithfully predict the knee contact behavior. Cartilage defects drastically affect the stress distribution on articular cartilages. When the defect size was smaller than 1.00 cm², the stress elevation and redistribution were found undistinguishable. However, significant stress elevation and redistribution were detected due to the large defect sizes (⩾1.00 cm²). This alteration of stress distribution has important implications relating to the progression of cartilage defect to OA in the human knee joint.     

A new algorithm for non-newtonian flow and its application in mould filling process

The simulation of injection molding process requires a stable algorithm to model the molten polymer with non-isothermal non-Newtonian property. In this paper, a staggered and iterative scheme is particularly designed to solve the velocity-pressure-temperature variables. In consideration of the polymer characteristic of high viscosity and low thermal conductivity, the non-Newtonian momentum-mass conservation equations are solved by the Crank-Nicolson method based split (CNBS) scheme, and the energy conservation equation with convective character is discretized by the characteristic Galerkin (CG) method. In addition, an arbitrary Lagrangian Eulerian (ALE) free surface tracking and mesh generation method is introduced to catch the front of the fluid flow. The efficiency of the proposed scheme is demonstrated by numerical experiments including a lid-driven cavity flow problem and an injection molding problem.