一种基于模糊逻辑-遗传算法的城市单交叉口交通信号控制方法

针对传统的单交叉口交通信号控制方法考察不全面和运算量大等缺陷，引出了“大相位”的概念。提出了一种基于模糊逻辑-遗传算法的城市单交叉口交通信号控制方法，通过分析和仿真，对该信号控制方法的有效性进行了验证。仿真结果表明，该方法有效地提高了控制效果和计算效率，特别是在路口交通量相差较大和变化较快的情况下。     

钢-混凝土组合梁中混凝土翼板的收缩应力

忽略钢-混凝土组合梁界面滑移,认为混凝土收缩引起的横截面变形符合平截面假定,由此建立混凝土收缩内力平衡方程和收缩应力计算公式。提出考虑混凝土收缩影响的组合梁混凝土开裂弯矩计算公式,以及混凝土收缩引起的组合梁挠度计算公式。算例表明,在进行组合梁混凝土的抗裂分析时,混凝土的收缩应力不容忽视。混凝土收缩引起的组合梁挠曲变形随组合梁跨高比的增大而迅速增加,大跨度组合梁的收缩挠度可以得到跨度的1/1000以上。对于混凝土翼板恒定的变截面组合梁,混凝土的收缩应力基本不随截面变化。组合梁混凝土收缩应力随混凝土翼板配筋率的提高而增加,但总的变化幅度不大。     

Why are work travel plans effective? Comparing conclusions from narrative and meta-analytical research synthesis

Reliable research synthesis is of high significance for a transport policy which tries to base its decisions on available empirical evidence. There is growing doubt whether the frequently used narrative approach provides a scientifically defensible way of synthesising a body of quantitative research results. The present paper demonstrates meta-analysis as a more objective and powerful alternative for this task. For this purpose evaluation data synthesised in two earlier narrative reviews on the effectiveness of work travel plans [Cairns et al. Making travel plans work: research report (former), Department for Transport, Local Government and the Regions (DTLR), London, 2002; Smarter choices—changing the way we travel. (Final report of the research project: The influence of soft factor interventions on travel demand. Research report for the Department for Transport.) London. Retrieved 1 December 2005, from , 2004] are meta-analytically re-analysed and compared with the conclusions drawn from the narrative synthesis of these data. Our meta-analyis provides only limited support for the conclusion that addressing parking is the hallmark of successful work travel plans. Our meta-analysis indicates that site and organisational factors as well as characteristics of the monitoring process are significant predictors of effective work travel plans, whereas Cairns et al. view little evidence for the impact of these factors.     

Guidelines for samplers: measuring a change in behaviour from before and after surveys

This paper addresses the issue of using before and after surveys to evaluate behavioural changes in response to transport policies and investments, a procedure that, we argue is done far too rarely in this profession. Further, it demonstrates very clearly that, in almost all conceivable cases, there are considerable economies to be obtained by using a panel (again, under-utilised in our profession) to undertake evaluation, rather than successive independent cross-sectional surveys. The paper also addresses the critical issue of sample size requirements for measuring changes of a relatively small magnitude in travel behaviour; i.e., to state, with 95% confidence, that if there is a ∂ percent change in behaviour for the sample, there is a ∂ percent ± e percent change in the behaviour of the population, where e is the sampling error. In this paper, we present a method for calculating such sample size requirements from first principles and demonstrate the applicability both hypothetically and then empirically using data from the Puget Sound Transportation Panel. The formulation enables designers of before and after surveys to investigate the trade-offs between the statistical accuracy of their predictions and the sample size requirements systematically, without the need to specify ∂ a priori. This latter point is crucial, we argue, because we have limited information on ∂, yet, as we explain here, it drives the sample size requirements using alternative, well-cited approaches for calculating sample sizes to assess behavioural change. The results have important ramifications both for those implementing transport policies intended to produce behavioural change, especially when a cost-benefit evaluation of the policy is desired, and for those interpreting the results reported in previous studies.     

Climate change and the future Maritime Policy for the EU

A cross-cutting Maritime Policy can ensure that climate change threats and challenges in regards to seas and oceans are dealt with in a wide policy framework that takes into account the impacts that climate change may have on other sectors and vice versa.     

Basic design of a series propeller with vibration consideration by genetic algorithm

Genetic algorithms (GAs) can powerfully search for parameters in a large multidimensional design space. Thus, the principle can be applied to preliminary series propeller design problems with multiple considerations. In the present study, B-series propeller design was conducted using a GA for both hydrodynamic efficiency and vibration consideration. The objective function was set by users who could freely weight the relative importance of efficiency and vibration. GAs were successfully shown to be able to obtain an optimal set of parameters leading to efficient performance and low vibration.     

采用成本预算编制投标报价

通过对当前建筑市场的投标报价现状分析，提出按成本价加适当利润作为投标报价的方法和具体做法。     

Study on fast calibration of a ULA＇s gain and phase error

Array calibration is important in engineering practice. In this paper, fast calibration methods for a ULA＇s gain and phase errors both in far and near fields are proposed. In the far field, using a single sound source without exact orientation, this method horizontally rotates the array exactly once, performs eigen value decomposition for the covariance matrix of received data, then computes the gain and phase error according to the formulas. In the near field, using the same single sound source, it is necessary to rotate the array horizontally at most three times, build equations according to geometric relations, then solve them. Using the formula proposed in this paper, spherical waves are modified into plane waves. Then eigen values decomposition is performed. These two calibration methods were shown to be valid by simulation and are fast, accurate and easy to use. Finally, an analysis of factors influencing estimation precision is given.     

Experimental research on spray and combustion characteristics of the third generation conical spray

A new generation conical spray system for conventional diesel engines or premixed combustion diesel engines is introduced. By means of oriented impingement method, flexible spray penetration in design is realized. High-speed photograph was used to investigate the spatial distribution characteristics of the new spray for cases of different impingement angles and needle valve opening pressures. The results show that, by applying spray impingement orientation, fuel jets spread along the cone surface as shape of sectors, so the dispersion of jets is increased obviously. Changing on impingement angle leads to variation of penetration, which is critical in homogeneous mixture preparation. Due to the flexibility of spray penetration in design, the spray impingement on liner is avoided in a great extent. The results also indicate that higher needle valve opening pressure results in longer penetration and larger spray angle after impingement. Combustion characteristics of the impinged conical spray were studied in the 1135 type diesel engine. The new impinged conical spray system work smoothly in full load range with better fuel economy and lower emissions of NOx and soot than the original test engine.     

Numerical simulation of three-dimensional combustion flows

A finite-rate method is used to simulate the three-dimensional combustion process in a plasma generator with CH4 as the fuel. The simulation was run with RNG k-ε model to simulate turbulence, with eddy-dissipation-concept （EDC） model to simulate the combustion and with discrete ordinates model to simulate radiation. The numerical results show that the flow field characteristics and the parameter distributions are under the condition of rich fuels, and these results provide valuable information when optimizing the plasma generator design and organizing its flow fields.