PIV velocity field measurements of flow around a KRISO 3600TEU container ship model

The main purpose of this investigation was to demonstrate a useful application of the particle image velocimetry (PIV) method to analyze the complex flow characteristics around a ship. For a sample illustration, the KRISO 3600TEU container ship model was chosen. The flow structure in the stern and near-wake region of the model has been investigated experimentally in a circulating water channel. Instantaneous velocity fields measured by the PIV velocity field measurement technique have been ensemble-averaged to give details of flow structures such as the spatial distributions of the local mean velocity, vorticity, and turbulent kinetic energy. The free-stream velocity was fixed at U _o = 0.6m/s, and the corresponding Reynolds number based on the length between perpendiculars was about 9.0 × 10⁵. The container ship model shows a complicated three-dimensional flow structure in the stern and near-wake regions. The PIV results clearly revealed the formation of large-scale bilge vortices in the stern region and their effect on the flow in the near-wake. The results shown here provide valuable information for hull form design and the validation of viscous ship flow codes and of turbulence models.     

A local model for the simulation of two–dimensional spilling breaking waves

A numerical model for the simulation of two dimensional spilling breaking waves is described. It is derived from a previous model which, in turn, takes its underlying ideas from the Cointe and Tulin theory of steady breakers. With respect to the former model, the present one is local, i.e., the inception, extension, and geometry of the breakers are determined through the local shape of the water surface. The model has been implemented in a RANSE code, which was developed for the simulation of ship flows, through a modification in the boundary conditions. This yields a simple and effective way to reproduce the breakers influence on the underlying flow. The resulting code has been used to simulate the flow past a submerged hydrofoil. The numerical results are compared with those of the previous model and with the experimental data obtained by Duncan.     

Safety culture on board six Swedish passenger ships

This paper presents the results of a Swedish study on maritime safety culture. The study aims to increase knowledge about the characteristics of safety culture in the maritime setting and about the relationship between safety culture and organizational climate. Such knowledge can be vital in the process of developing and improving safety culture. The paper reports the results of safety culture assessments on board six Swedish passenger ships in international traffic, using observations, questionnaires, and interviews focussing on 508 employees who completed the questionnaires. The results of the assessments revealed a generally good existing safety culture. Differences in individuals' safety culture perceptions were found between ships, vessel type (high-speed craft versus Ropax), and hierarchical working position. Important relationships between organizational climate and safety culture were also found. A comparison with other transport sectors where the same safety culture assessment had been applied yielded that passenger shipping has an average safety culture score level that falls between air traffic control and airport ground handling. The method of assessment, which can be used by shipping companies and vessel crews, identified specific areas of concern in the safety culture that could support continuous improvements of safety and safety culture.     

Gantry crane operations to transfer containers between trains: A simulation study of a Spanish terminal

Freight transfer operations are critical in combined transport networks. In this paper a simulation model and modelling approach to the transfer of cargo between trains at rail terminals is presented. The model is used to study the Port-Bou terminal, the main intermodal terminal at the Spanish-French frontier. Four different gantry crane operation modes to interchange containers between trains are evaluated. These operation rules are tested in several scenarios to examine the critical factors of the system and the best operation rule for each situation. Latest generation software is used to develop the model that incorporates modular programming and enhanced graphic systems for output representation. It allows a dynamic display of the simulated system and, likewise, the possibility of developing modules that can be reused in other studies. The research shows how simulation can be a useful planning tool in the rail transportation context.     

Gas transfer velocities of CO2 and CH4 in a tropical reservoir and its river downstream

We have measured simultaneously the methane (CH₄) and carbon dioxide (CO₂) surface concentrations and water–air fluxes by floating chambers (FC) in the Petit-Saut Reservoir (French Guiana) and its tidal river (Sinnamary River) downstream of the dam, during the two field experiments in wet (May 2003) and dry season (December 2003). The eddy covariance (EC) technique was also used for CO₂ fluxes on the lake. The comparison of fluxes obtained by FC and EC showed little discrepancies mainly due to differences in measurements durations which resulted in different average wind speeds. When comparing the gas transfer velocity (k₆₀₀) for a given wind speed, both methods gave similar results. On the lake and excluding rainy events, we obtained an exponential relationship between k₆₀₀ and U₁₀, with a significant intercept at 1.7 cm h^− 1, probably due to thermal effects. Gas transfer velocity was also positively related to rainfall rates reaching 26.5 cm h⁻¹ for a rainfall rate of 36 mm h^− 1. During a 24-h experiment in dry season, rainfall accounted for as much as 25% of the k₆₀₀. In the river downstream of the dam, k₆₀₀ values were 3 to 4 times higher than on the lake, and followed a linear relationship with U₁₀.     

Hydrographic cruises off northwest Africa: the Canary Current and the Cape Ghir region

We present hydrographic data for several sections located along the African coastline and off Cape Ghir, carried out at times of weak surface winds (October 1995 and September 1997). The main sections are near the continental slope, at mean distances between 100 and 150 km from the coastline. North of Cape Ghir (31°N) the geostrophic transport (referenced to 650 m) of North Atlantic Central Water through these sections is 3.7 and 2.0 Sv for 1995 and 1997, respectively. This confirms that a major fraction of the water transport by the Canary Current flows east, into the continental slope off northwest Africa, at latitudes above Cape Ghir. Most of this flow continues south past Cape Ghir, along the coast and probably through the eastern passages of the Canary Archipelago. A significant fraction, however, may escape through surface Ekman transport (0.3–0.5 Sv during the early fall season) and by offshore flow at Cape Ghir (1.1 Sv in September 1997, referenced to 650 m). Despite the weak winds the Cape Ghir filament was clearly visible, characterized by localized coastal upwelling associated to a cyclonic shallow structure and cold (and fresh) waters stretching offshore as a very shallow feature (50–100 m deep). The satellite images show that the surface temperature field is highly variable, in rapid response to the surface winds, always with a core region of relatively cold water and commonly with one or two associated eddies. Our results support the existence of two recirculation cells in the area: a horizontal one that connects the interior eastern boundary currents with the coastal region and a vertical one related to both wind-induced and filament upwelling. The data also show a salinity subsurface maximum at the root of the filament, linked to water inflow from northern latitudes, and a subsurface anticyclonic eddy over the Agadir canyon, likely related to the poleward slope undercurrent.     

基于Internet地籍信息系统的建立方法

探讨了在AutoCADMap2 0 0 0平台下 ,建立网络地籍信息系统的关键技术和整体开发方案 ,以及系统中各种图形数据与属性数据处理的问题     

Studies on the optimization of stern hull form based on a potential flow solver

A hypothesis of the minimum energy of secondary flow, suggested by Bessho, is introduced here. According to this hypothesis, it can be expected that hull forms having frame lines with a minimum energy of secondary flow show less form drag. In the first part of this article, secondary flow energy is evaluated for the cases with and without a free-surface effect, and Bessho’s hypothesis is confirmed for practical hull forms. Then optimization methods for the stern hull form are suggested, in which a nonlinear optimization technique is introduced. Numerical examples are given for a practical tanker hull form and a practical container hull form. From these studies, the suggested optimization method can be confirmed as a simplified and practical design method to the select frame lines of stern hull forms.     

Modeling household interactions in daily in-home and out-of-home maintenance activity participation

The activity travel patterns of individuals in a household are inter-related, and the realistic modeling of activity-travel behavior requires that these interdependencies be explicitly accommodated. This paper examines household interactions impacting weekday in-home and out-of-home maintenance activity generation in active, nuclear family, households. The in-home maintenance activity generation is modeled by examining the duration invested by the male and female household heads in household chores using a seemingly unrelated regression modeling system. The out-of-home maintenance activity generation is modeled in terms of the decision of the household to undertake shopping, allocation of the task to one or both household heads, and the duration of shopping for the person(s) allocated the responsibility. A joint mixed-logit hazard-duration model structure is developed and applied to the modeling of out-of-home maintenance activity generation. The results indicate that traditional gender roles continue to exist and, in particular, non-working women are more likely to share a large burden of the household maintenance tasks. The model for out-of-home maintenance activity generation indicates that joint activity participation in the case of shopping is motivated by resource (automobiles) constraints. Finally, women who have a higher propensity to shop are also found to be inherently more efficient shoppers.     

Trucking industry demand for urban shared use freight terminals

The issue of shared use urban freight facilities first received attention during the 1970s when it was observed that, while inter-urban freight movements were becoming increasingly efficient, there were significant diseconomies in the movement of freight via truck within urban areas. Early research suggested that shared urban freight facilities should be constructed so that trucking companies could consolidate smaller shipments into larger ones. In the past few years, the concept of Urban Ports has gained increasing attention, not just for carriers who need to load and unload freight, but to provide a place near the urban center for truckers to wait out peak traffic periods. In this paper, using recently developed survey data, we examine trucking company interest in such facilities by examining the results of an ordered probit demand model.