Exploring maritime ergonomics from a bottom line perspective

The present paper reports a study composed of three research activities exploring the economics of ergonomics in a shipping context. First, a literature study aimed to review previous studies on the economics of ergonomics in general and within the maritime domain in particular; and moreover, to ascertain the key ergonomic factors addressed in contemporary maritime ergonomic research. Second, the concept of ergonomics was probed from a stakeholder perspective through nine semi-structured qualitative interviews. Third, structured interviews were held with representatives of ten Swedish shipping companies to investigate if the shipowners are aware of and calculate the economic effects of ergonomics.     

Design and optimization of an LPG roller vane pump for suppressing cavitation

A roller vane type liquefied petroleum gas (LPG) pump was developed for a liquid phase LPG injection (LPLi) engine. Most of the LPG pumps used in the current LPLi engines are installed inside of the LPG tank, but this pump is intended to be installed outside of the LPG tank to overcome the difficulty of fixing an in-tank pump. Because LPG has a low boiling point and high vapor pressure, it usually causes cavitation in the pump and consequently deteriorates the flow rate of the pump. The purpose of this work is to optimize the design of the roller vane pump in order to suppress cavitation and increase the fuel flow rate by using a computational fluid dynamics (CFD) analysis. In order to achieve these goals, the intake port configuration and the rotor of the roller vane pump were redesigned and simulated using STAR-CD code. Computation was performed for six different models to obtain the optimized design of the roller vane pump at a constant speed of 2600 rpm and a constant pressure difference between the inlet and outlet of 5 bar. The computation results show that an increased intake port cross-section area can suppress cavitation, and the pump can achieve a higher flow rate when the rotor configuration is changed to increase its chamber volume. When the inlet pressure difference is 0.1 bar higher than the fluid saturation pressure, the pump reaches its maximum flow rate.     

Experimental study on the impact characteristics of a sandwich composite with an aluminum foam core

The need for composites has been increasing in various industries because composites have good mechanical properties for their weight and superior stiffness and strength. The composites addressed in this study were multi-pore aluminum foam with a specific gravity of 1/10 composed of solid aluminum metal. This composite has excellent impact energy-absorption capability. In this study, impact tests on an aluminum foam core sandwich composite with a porous core were conducted to examine its mechanical properties. The specimen was a sandwich structure with an aluminum foam core, and different impact energies, such as 50J, 70J, and 100J, were applied to the specimen. Consequently, a maximum load of 5.5 kN occurred when the striker penetrated the upper face sheet in all experiments. The maximum load occurred at 4.2 ms for 50J, 3.5 ms for 70J, and 3.0 ms for 100J, indicating that the greater the impact energy was, the shorter the time was until the maximum load. After the maximum load occurred, that is, after the penetration of the upper face sheet, the striker penetrated 10 mm further, causing the core to be damaged in the 50J test, while the lower face sheet remained intact. In the 70J test, the striker penetrated the core and caused damage to the upper face sheet at 10 ms. Finally, in the 100J test, the striker penetrated both the upper face sheet and core and even the lower face sheet at 10 ms. Given the result above, the maximum load occurred when the striker penetrated the upper face sheet and the sandwich composite with aluminum foam core; the load then gradually decreased and then rapidly increased when the striker reached the lower face sheet, and the maximum load lasted slightly longer than the time required for the upper face sheet to be penetrated.     

The analysis of life safety and economic loss in marine accidents occurring in the Turkish Straits

The increase in the world's trading capacity, which has been spurred by globalization, has caused problems in marine transportation, namely congestion. Despite the safety measures currently in place, marine accidents are still not being prevented. This study focuses on marine accidents in the Turkish Straits that have done serious harm to humans, the natural environment, and the economy. To reduce the negative impacts mentioned above, this study considered the most common types of accidents, their causes, and their results. For this purpose, 850 serious marine accidents, which took place in the Turkish Straits between the years of 2001 and 2010 (as recorded by the Undersecretaries for Maritime Affairs), have been analyzed and the data obtained have been systematically tabulated using analytic hierarchy process (AHP) methodology. According to the data, the most significant cause of marine accidents in the Turkish Straits is human error. This study proposes measures to ensure that ship personnel are competent, mentally and physically, to navigate narrow and dangerous waterways in order to minimize the amount of accidents caused by human error.     

A case study related to the improvement of working and rest hours of oil tanker deck officers

Navigation safety on coastal waters is an extremely important issue. Fatigue is an important factor threatening navigation safety. Considering that the vessel type is an oil tanker, such a threat is not posed only to the crew but also to the environment. Most of the tankers navigating coastal waters are in the small tanker category. Therefore, this study examined the working and resting hours of the deck officers in the oil tankers navigating coastal waters. The study utilized the ISF Watchkeeper 3 program for assessing and interpreting the working periods. The study reached the conclusion that the first and second officers in particular are working under unsuitable conditions. To improve the working conditions of the deck officers, effects of additional cargo officer on board was investigated. This study is in quality of recommendation. The study elucidated that the cargo officer practice determines the working and resting hours of deck officers, in the work on the oil tankers, and compliance with the related conventions.     

高墩大跨连续刚构桥的温度效应研究

为了研究高墩大跨连续刚构桥在温度荷载作用下的影响,以实际桥梁工程为背景,建立其数值分析计算模型,分别考虑了我国公路桥梁设计规范、英国BS-5400规范和日本规范三种不同规范的温度荷载模式.通过对关键截面的应力水平、挠度变化进行对比研究,结果表明,不同设计规范的温度荷载模式对高墩大跨连续刚构桥的力学行为特征引起差异较大.     

Prediction of wave parameters by using fuzzy inference system and the parametric models along the south coasts of the Black Sea

Forecasting of sea-state characteristics has a great importance in coastal and ocean engineering studies. Therefore, the purpose of this study was to investigate performances of Adaptive-Network-Based Fuzzy Inference System (ANFIS) and several parametric methods in the Black Sea. For this purpose, different fuzzy models with different input combinations were developed for two different wind data sources (TSMS and ECMWF) at two offshore buoy stations. It also aimed to apply several approaches to event-based data sets for wave predictions. Generally, in literature the tendency is to use time series data for wave predictions. In this kind of prediction approach, lagged time series data are taken as inputs and current or future variables are taken as output. In this study, event-based data for each independent storm were extracted from time series data. Simultaneous or concurrent data of wind speed, blowing duration, fetch length and wave characteristics were detected for each single storm. These event data were then used to set up models. The hindcast results were validated with significant wave height and mean wave period data recorded in Hopa and Sinop buoy stations. The performance of developed fuzzy models were also compared with that of four different parametric methods (Wilson, SPM, Jonswap, and CEM methods) applied for two wind data sources at both buoy stations. Finally, it was determined that in the prediction of both wave parameters (H _s and T _z) the ANFIS models (R = 0.66, squared correlation coefficient, and MAE = 0.37 m, mean absolute error, for the best model in prediction of H _s) were more accurate than the parametric methods (R = 0.63 and MAE = 0.75 m for the best model in prediction of H _s).     

Analysis of occupational accidents encountered by deck cadets in maritime transportation

The 2010 Manila amendments to the Standards of Training, Certification and Watchkeeping Code (STCW) was adopted by the idea to render the profession more attractive to the seafarers, particularly to cadets. It is possible to ensure greater attraction only by providing suitable and safe working conditions on board to cadets. This study analyses occupational accidents and near misses encountered by ocean going deck cadets, who received A-II/I training, during their sea training. The aim of this study was to determine causal factors influencing work accidents and to propose several recommendations for the safety of deck cadets. A total of 857 officer candidates, who received maritime education at university level in Turkey, were interviewed. The Analytic Hierarchy Process (AHP) method was used in the study to analyse the occupational accidents. As a result of this study on deck cadets, the most risky areas for work accidents were found to be the deck (39.9%), cargo areas (35.7%), areas used for manoeuvring operations (including winch areas and areas in which berthing, unberthing, and anchoring operations take place) (16.1%), and accommodation areas (8.3%). The most important root causes for occupational accidents were identified as not using personal protective equipment (24.2%), haste (22.6%), and presence in inappropriate places (13.6%). This study offers some important insight into the prevention of occupational accidents, and includes suggestions and advisory opinions of sector representatives. As a result of this study, several recommendations for the prevention of accidents are proposed.     

Non-local simulation of the stable boundary layer with a third order moments closure model

A new higher order closure model for the stable boundary layer is presented and compared with Large Eddy Simulation data. The model includes numerical solutions for the mean values, second and third order moments equations. A satisfactory agreement is found between the calculated vertical profiles of the turbulent quantities with those provided by the LES. Furthermore the new model results are compared with profiles obtained with a lower order closure model in order to verify the effective importance of including third order dynamical equations in the model.     

北京市铁路噪声特性实例分析研究

通过实际测量及数据分析，认为测量现场昼夜等效声级达到 ７７７ ｄ Ｂ（ Ａ），超过了国家标准；快速列车噪声频谱分布复杂，难以治理；列车鸣笛对铁路噪声超标贡献最大，验证了铁路噪声与列车车速的关系，最后提出控制铁路噪声的建议。