用光学混合方法测定GaAs的输运参量

本文提出了用光学混合技术测定光电导材料输运参量的新方法，He-Ne激光的多纵模在n型GaAs样品上的混合，可获得该样品的光电流和三倍差频的微波功率信号，经把光电导外差分析方法推广后，可得出载流子寿命、迁移率、漂移速度等参量对所加电场的依赖关系和它们的温度特性，并在20K-240K的温度区间，讨论了该样品的复合机构和散射机构。     

机车零部件无损检测的发展与改进的前景

在《俄罗斯铁路公司铁道机车车辆零部件无损检测2010年前的发展战略》编制的工作框架内，公司副经理、总工程师B．A．加帕诺维奇委托机务局的专家们准备了牵引机车车辆无损检测系统的改进方案。     

草场变成荒野就在一念之间

我发现自己职业生涯的大部分时间都在研究草场,包括坦桑尼亚角马迁徙、洪流搏动的塞伦盖蒂大草原,西藏高原和蒙古大草原。草场一直萦绕脑海或记忆的边缘。稀树草原(炎热、季节性干旱气候条件下成长的植被类型)和温带草原(温带气候下的地带性植被类型之一)大约占地球陆地表面的40%。人类起源于广袤的非洲大草原,许多狩猎采集社会直到近代都与这种环境息息相关。各种形态的人类社会约从一万三千年前开始通过培育各种作物和驯养野生有蹄动物而逐步演化。     

传统三大件结构转向架的缺陷

分析既有型18-100型三大件结构转向架的缺陷。提出采用主动悬挂代替被动悬挂,可以改善转向架的动力学性能。     

新型转向架Syntegra

文章介绍了德国最新研究的Syntegra型转向架,阐述了研究和生产该转向架的目的、意义和发展前景。详细说明了与之相匹配的牵引电动机和变压器的结构、特性以及制动原理。     

采用快速镀铁法修复连杆

<正>采用镀铁法修复磨损不大的零件比堆焊法有一系列优点:对零件没有热力作用;零件不会翘曲;所镀复的金属利用率高;可以用不贵重和不稀缺的材料获得耐磨镀层。 普通镀铁法的缺点是工序多、耗水量大、排水污染、镀层的电镀速度低。 本文介绍的连杆大头快速镀铁工艺将会克服上述缺点。电镀前对连杆先进行清理与缺陷检查,并放在除油装置(图1)上,用滑石粉对连杆大头内表面除油。将连杆4套在轴2和带毛刷的轴5上,毛刷预先涂上滑石粉。轴5的转速为50～100r/min,在转动1分钟后,利用泵7将箱体1底壳内的水压送到清洗机构3,以此除去连杆表面上的滑石粉和其他污物。除油和清洗的时间总计为2～3分钟。     

两种直接波浪能转换系统性能的比较:阿基米德波浪摆和波能浮筒(英文)

Many wave energy conversion devices have not been well received. The main reasons are that they are too complicated and not economical. However, in the last two decades direct conversion systems have drawn the attention of researchers to their widely distributed energy source due to their simple structure and low cost. The most well-known direct conversion systems presently in use include the Archimedes Wave Swing (AWS) and Power Buoy (PB). In this paper, these two systems were simulated in the same conditions and their behaviors were studied in different wave conditions. In order to verify the simulations, results of the generator of the finite element computations were followed. An attempt was made to determine the merits and drawbacks of each method under different wave conditions by comparing the performance of the two systems. The wave conditions suitable for each system were specified.     

双通线加热的热力学及实验分析(英文)

The present investigation deals with process analysis of oxy-acetylene flame assisted double pass line heating for varying plate thickness. oxy-acetylene flame as the heat source for multi pass line heating to achieve 3-D bending of plates with varying thicknesses was studied. The oxy-acetylene flame was modeled as the moving heat source in the FEM analysis. The transient thermal histories were predicted taking into account the temperature dependent thermo-mechanical properties. A comparative study between single pass and double pass line heating residual deformation was also carried out. The temperature distribution and residual deformations predicted by the numerical model developed in the present work compared fairly well with those of the experimental ones.     

Experimental Investigation of TARMAX Model for Modeling of Hydrodynamic Forces on Cylinder-like Structures

A new approach that models lift and drag hydrodynamic force signals operating over cylindrical structures was developed and validated. This approach is based on stochastic auto regressive moving average with exogenous (ARMAX) input and its time-varying form, TARMAX. Model structure selection and parameter estimation were discussed while considering the validation stage. In this paper, the cylindrical structure was considered as a dynamic system with an incoming water wave and resulting forces as the input a...