从全球角度透视巴拿马运河扩建及海运业的发展(英文)

2007年6月13日,巴拿马运河管理局在上海浦东香格里拉大酒店举办“巴拿马海运日”,巴拿马运河管理局国际顾问委员会主席、国际海事组织(IMO)前秘书长威廉·A·奥尼尔先生在开幕仪式上发表了演讲。奥尼尔先生的讲话着重强调海运在当代经济和社会发展中不可替代的巨大作用,集装箱化又是影响最大的因素之一,而且在可持续发展大趋势下,海运又是能效最高、对生态环境最友好的运输方式。演讲还指出海运事业广泛的国际性以及各国政府在政策法规等方面合作和协调对发展全球海运业的重要意义。奥尼尔先生高度赞扬巴拿马运河回归后的出色管理,以及运河在21世纪,尤其是在扩建计划完成后,对世界航运业的重大贡献。应本刊之约,讲演稿由作者修改后发表如下。     

Hybridation of generation propagation models and SPH model to study severe sea states in Galician Coast

The Atlantic and Cantabrian coasts of the Iberian Peninsula suffer the periodic passage of storms which give rise to severe sea states. Standard generation- propagation models (WAM, WAVEWATCH, SWAN) are commonly used for operational oceanography purposes with satisfactory results both in the open ocean and in near shore areas but they do not provide information about the possibility of flooding in coastal areas. A 2D HV version of SPH (Smoothed Particle Hydrodynamics) model is considered to propagate the signal provided by generation- propagation models to the coast and to analyze the nature of coastal structures overtopping as a tool to create maps of risk. SPH is shown to provide valuable information about overtopping (maximum water height and water velocity) under the stormy conditions suffered by the Galician coast on February 17, 2006.     

Low temperature premixed combustion within a small bore high speed direct injection (HSDI) optically accessible diesel engine using a retarded single injection

An optically accessible single-cylinder high speed direct-injection (HSDI) Diesel engine equipped with a Bosch common rail injection system was used to study low temperature Modulated Kinetics (MK) combustion with a retarded single main injection. High-speed liquid fuel Mie-scattering was employed to investigate the liquid distribution and evolution. By carefully setting up the optics, three-dimensional images of fuel spray were obtained from both the bottom of the piston and the side window. The NOx emissions were measured in the exhaust pipe. The influence of injection pressure and injection timing on liquid fuel evolution and combustion characteristics was studied under similar fuel quantities. Interesting spray development was seen from the side window images. Liquid impingement was found for all of the cases due to the small diameter of the piston bowl. The liquid fuel tip hits the bowl wall obliquely and spreads as a wall jet in the radial direction of the spray. Due to the bowl geometry, the fuel film moves back into the central part of the bowl, which enhances the air-fuel mixing process and prepares a more homogeneous air-fuel mixture. Stronger impingement was seen for high injection pressures. Injection timing had little effect on fuel impingement. No liquid fuel was seen before ignition, indicating premixed combustion for all the cases. High-speed combustion video was taken using the same frame rate. Ignition was seen to occur on or near the bowl wall in the vicinity of the spray tip, with the ignition delay being noticeably longer for lower injection pressure and later injection timing. The majority of the flame was confined to the bowl region throughout the combustion event. A more homogeneous and weaker flame was observed for higher injection pressures and later injection timing. The combustion structure also proves the mixing enhancement effect of the liquid fuel impingement. The results show that ultra-low sooting combustion is feasible in an HSDI diesel engine with a higher injection pressure, a higher EGR rate, or later injection timing, with little penalty on power output. It was also found that injection timing has more influence on HCCI-like combustion using a single main injection than the other two factors studied. Compared with the base cases, simultaneous reductions of soot and NOx were obtained by increasing EGR rate and retarding injection timing. By increasing injection pressure, NOx emissions were increased due to leaner and faster combustion with better air-fuel mixing. However, smoke emissions were significantly reduced with increased injection pressure.     

Modelling the determinants of car-sharing adoption intentions among young adults: the role of attitude,perceived benefits,travel expectations and socio-demographic factors

Transportation - Major cities in developing countries are increasingly becoming motorized. Thus, effective solutions to address the negative impacts that come with rising car-ownership are needed...     

Genetic algorithm-based simulation optimization of the ALINEA ramp metering system: a case study in Atlanta

ABSTRACT

This paper presents a case study of the optimal ALINEA ramp metering system model of a corridor of the metro Atlanta freeway. Based on real-world traffic data, this study estimates the origin-destination matrix for the corridor. Using a stochastic simulation-based optimization framework that combines a micro-simulation model and a genetic algorithm-based optimization module, we determine the optimal parameter values of a combined ALINEA ramp metering system with a queue flush system that minimizes total vehicle travel time. We found that the performance of ramp metering with optimized parameters, which is very sensitive possibly because bottlenecks are correlated, outperforms the no control model with its optimized parameters in terms of reducing total travel time.     

Incorporating Logistics in Freight Transport Demand Models: State-of-the-Art and Research Opportunities

Freight transport demand is a demand derived from all the activities needed to move goods between locations of production to locations of consumption, including trade, logistics and transportation. A good representation of logistics in freight transport demand models allows us to predict the effects of changes in logistics systems on future transport flows. As such it provides better estimations of the costs of interaction and allows to predict changes in spatial patterns of freight transport flows more accurately. In recent years, the attention for freight modelling has been growing and new research work has appeared aimed at incorporating logistics in freight models. In this paper we review the state of the art in the representation of logistics considerations in freight transport demand models. Our focus is on the service and cost drivers of changes in logistics networks and how these affect freight transport. Our review proceeds along a conceptual framework for modelling that goes beyond the conventional 4-step modelling approach. We identify promising areas for freight modelling that have an integrative function within this framework, such as spatial computable general equilibrium models, supply chain choice models and hypernetwork models.     

Traffic Noise in Europe: A Comparison of Calculation Methods,Noise Indices and Noise Standards for Road and Railroad Traffic in Europe

The demand for inland freight transport in Europe is mainly met by road transport, leading to unsustainable impacts such as air pollution, greenhouse gas emissions and congestion. Since rail transport has lower externalities than road transport, a modal shift from road to rail is an accepted policy goal for achieving a more sustainable and competitive transport system. However, intermodal road–rail transport is mainly competitive for long-distance transport, and as a consequence, the potential for modal shift is limited. The cost efficiency of road–rail intermodal transport is particularly sensitive to pre- and post-haulage (PPH) costs, since this activity typically has a larger cost compared with its share of the total distance in the transport chain. For intermodal transportation over shorter distances, for example, below 300 km and where there are substantial PPH activities at both ends of the chain, the competitiveness of the intermodal transport system compared with that of direct road is low. Improving the efficiency of PPH activities is, therefore, of utmost importance for the competitiveness of the intermodal transport system. This paper looks into the issue of improving the cost efficiency of an intermodal transport chain by implementing an innovative and flexible legal framework regarding the PPH activities in the chain. By extending the legal framework with exemptions for longer vehicles in PPH, the cost efficiency could be greatly improved. The purpose of such a framework is to allow and enable, for PPH exclusively, the use of 2?×?40 foot or even two semi-trailers using only one vehicle in the context of the Swedish regulatory framework. This paper develops a strategic calculation model for assessing and investigating the consequences of such a framework and investigates the framework's potential in terms of cost efficiency. The model in combination with a sensitivity analysis of input variables gives a comprehensive understanding of the effects of PPH under different circumstances. From the results, it is evident that there are substantial positive effects associated with a PPH framework of longer vehicles. Results indicate that a typical shipper may experience cost reductions of about 5–10% of the total costs of the intermodal transport chain. In summary, a more innovative and flexible legal framework regarding vehicle length in the PPH links can contribute to a greater modal shift, improved cost efficiency and more environmentally friendly transportation systems.     

Book reviews

Practice, Politics and Policies—"The Politics of Transport”. By Enid Wistrich. (Harlow, Essex: Longman Group Limited, 1983.) [Pp. 185, with index.] £4·25.

Econometric Analysis and Railway Costing. By W. G. Waters, II and A. D. Woodland. (North Oxford Academic, 1984.) [Pp.132.] £12·95.     

Port Economics,Policy and Management: Content Classification and Survey

This paper presents a taxonomy and analysis of the content of published research in port economics, policy and management (port studies). The recent increase of these publications suggests a growing interest in the study of ports. However, the research characteristics and directions of this research field are unidentified. This paper provides a systematic analysis of port studies published during the period 1997–2008. A comprehensive cross-citation and analysis of the themes, approaches and findings of all 395 relevant journal papers identifies the extent to which the research field is maturing, and the leading papers. This paper also presents an extensive analysis of the content, based on the classification of all port studies into seven research themes. For each theme, research topics, widely used research questions, concepts and research methods and the most important research findings are discussed. Finally, we identify emerging research challenges and research questions that still need to be answered.