A note on using Davidson's function in equilibrium assignment

This paper describes the use of the Davidson congestion function in modelling network flows using equilibrium assignment. A modification to the function is given, which defines the function over all flows values, and consequently removes computational difficulties noted in earlier studies. The modification requires the inclusion of an additional model parameter, and the selection of a suitable value for this parameter is studied for two sets of data. The modified Davidson function is also compared to two alternative functions; a step-wise linear function and a quartic polynomial function, which have both been proposed as congestion functions. Comparisons are made between observed link volumes and the assigned volumes from these models. It is concluded that the modified Davidson function is useful for inclusion in an equilibrium assignment model, given its ability to reflect differences in network link type (e.g. capacity and speed) and environment through its parameters, the conceptual advantage of the function through its derivation from queueing theory, and the previous discovery of reliable methods for estimating its parameters. A value of about 0.8–0.9 is suggested for the parameter (μ, 0 < μ < 1) introduced in the modification.     

Active Roll Control for Passenger Cars

The development of a mathematical model of a limited bandwidth hydro-pneumatic suspension that is incorporated into a vehicle handling model is described. The combined model is used to evaluate a suitable control strategy for eliminating body roll during a cornering manoeuvre. The philosophy behind the roll control strategy has been to use feedback measurements of the body motions which do not compromise the ride control. A study of the influence of the position of the body motion feedback transducer on the effectiveness of the system to reduce the body roll is presented. Non-linear modelling of the suspension components for a 0.8g cornering manoeuvre has revealed performance limitations. Conclusions are drawn as to the effectiveness of the control scheme.     

Trip distribution for limited destinations: a case study for grocery shopping trips in the Netherlands

In this paper, we introduce a new trip distribution model for destinations that are not homogeneously distributed. The model is a gravity model in which the spatial configuration of destinations is incorporated in the modeling process. The performance was tested on a survey with reported grocery shopping trips in the Dutch city of Almelo. The results show that the new model outperforms the traditional gravity model. It is also superior to the intervening opportunities model, because the distribution can be described as a function of travel costs, without increasing the computational time. In this study, the distribution was described by a simple function of Euclidean distance, which provides a good fit to the survey data. The slope of the distribution is quite steep. This shows that most trips are made to nearby supermarkets. However, a significant fraction of trips, mainly made by car, still goes to supermarkets further away. We argue that modeling of these trips by the new method will improve traffic flow predictions.     

Parameter transfer of common-metric attributes in choice analysis: implications for willingness to pay

There is a growing literature that promotes the presence of a mix of compensatory and semi-compensatory processing strategies in the way that individuals evaluate packages of attributes in real or hypothetical markets, and make choices. This paper proposes a specification for the utility form in a choice model to test if, given a pair of attributes with a common-metric (e.g., components of travel time or cost), the attribute with the dominating level defines the marginal (dis)utility that is assigned to both attributes. We refer to this processing strategy as a parameter transfer rule. We use a stated choice data set, in the context of car driving individuals choosing between tolled and non-tolled routes, to estimate a mixed logit model which incorporates the presence of the parameter transfer rule and the conventional fully compensatory rule, both existing up to a probability. We find that if this parameter transfer heuristic is part of the mix, the WTP is more than 30% higher, on average, than when only a fully compensatory rule is imposed. We also contrast the parameter transfer rule with other semi-compensatory heuristics which have been investigated in other papers, and show that the finding adds further support to the accumulating evidence that a semi-compensatory attribute processing rules tend to result in higher mean WTP estimates compared to the fully compensatory attribute processing rule.     

Equilibria of bilateral taxi–customer searching and meeting on networks

This paper proposes an equilibrium model to characterize the bilateral searching and meeting between customers and taxis on road networks. A taxi driver searches or waits for a customer by considering both the expected searching or waiting time cost and ride revenue, and a customer seeks a taxi ride to minimize full trip price. We suppose that the bilateral taxi–customer searching and meeting occurs anywhere in residential and commercial zones or at prescribed taxi stands, such as an airport or a railway station. We propose a meeting function to spell out the search and meeting frictions that arise endogenously as a result of the distinct spatial feature of the area and the taxi–customer moving decisions. With the proposed meeting function and the assumptions underlying taxi–customer search behaviors, the stationary competitive equilibrium achieved at fixed fare prices is determined when the demand of the customers matches the supply of taxis or there is market clearing at the prevailing searching and waiting times in every meeting location. We establish the existence of such an equilibrium by virtue of Brouwer’s fixed-point theorem and demonstrate its principal operational characteristics with a numerical example.     

Improving the efficiency of demand-responsive paratransit services

State agencies responsible for ADA-eligible paratransit services are increasingly under pressure to contain costs and maximize service quality. Many do not operate vehicles themselves; instead, they contract out the provision of services. Contractors are paid for each hour of service. They are responsible for hiring crew, forming routes, dispatching, and operating and maintaining agency-owned vehicles. In the Twin Cities of Minneapolis and Saint Paul, Metro Mobility, the agency responsible for providing paratransit services, requires contractors to use agency-approved software for booking trips dynamically and sets parameters that guide contractors’ practices. Customer trips booked in this fashion may not utilize capacity in the most efficient manner. Therefore, beginning with the daily trip schedules generated by the software, this paper proposes two approaches for improving the efficiency of paratransit operations and estimates the benefit of using these approaches via experiments that utilize Metro Mobility data. The first approach re-optimizes routes developed at the end of each day. The second approach evaluates the benefit to state agencies of selectively using non-dedicated service providers such as taxis. Both approaches are tested on actual data obtained from Metro Mobility. The study shows that a conservative estimate of savings from re-optimization would be approximately 5% of Metro Mobility’s operating costs. Savings from the use of taxis are smaller and in the range of hundreds of dollars per day.     

Evaluating locational accessibility to the US air transportation system

Although there are hundreds of airports that support commercial air passenger traffic in the United States (US), not all areas are equivalently served by the commercial air transportation system. Locations in the US differ with respect to their level of access to the commercial air network and their overall accessibility within the system. Given the complexity of the domestic commercial air passenger network and supporting infrastructure, past research has only been able to provide a limited assessment of locational accessibility within the United States. To address these complexities, this paper proposes a new metric that incorporates measures of access to air transport as well as accessibility within air transportation networks. Using a comprehensive dataset on scheduled airline service, the developed approach is then applied to the US domestic commercial passenger air transportation network to explore geographic differentials in accessibility. Results suggest marked differences between core-based statistical areas throughout the US.     

An Optimal Self-Tuning Controller for an Active Suspension

An optimal self-tuning control algorithm is presented for vehicle suspension design. The controller, incorporating a weighting controller, state observer and parameter estimator, is designed according to linear optimal control (LQG) theory. Based on the updated estimates of vehicle parameters and states, and the adapted weighting parameters, the LQG controller provides the optimal set of gains over different operating conditions. The feasibility and effectiveness of the proposed self-tuning system was investigated and proved by simulation studies.     

Effect of nozzle orifice diameter on diesel spray tip penetration according to various spray models for CFD simulation with widely varying back pressure

CFD simulations of spray tip penetration with the standard KIVA3V, ‘original gas jet’ and ‘Normal gas jet profile with breakup length formula’ (NGJBL) spray models were performed to investigate the effects of nozzle orifice size and ambient gas density combinations on the spray penetration. The accuracy of the CFD simulation results was estimated by comparing them with available experimental data. The ambient gas density was varied in 12 kg/m³ intervals from 12 to 69 kg/m³ for each nozzle orifice diameter. The nozzle orifice diameters used were 119, 140, 183 and 206 mm. A total of 20 cases in the CFD simulations were considered with combinations of the 4 nozzle orifice diameters and 5 ambient gas densities. CFD simulations with the NGJBL spray model were more accurate than those with either the standard KIVA3V or gas jet spray models as the nozzle orifice diameter and ambient gas density was increased. The NGJBL and original gas jet model is more effective in predicting the spray tip penetration near the nozzle tip region.     

Risk assessment framework for exposure of cargo and ports to natural hazards and climate extremes

There is an increase in risks and catastrophic losses in maritime transport including ports and cargo. Significant losses have been associated with large scale natural hazards, such as earthquakes, tsunami, cyclones, and other extreme weather events. This paper identifies the main gaps in understanding maritime risks in transportation research. The gaps are attributed to insufficient empirical work available from the maritime transport and logistics research community to guide multi-risk and natural hazards impact assessment on seaport and cargo. In addition, disaster studies communities have barely made adequate efforts to understand and assess port and cargo risks arising from multi-hazards and disaster events. This paper examines existing conceptual frameworks concerning exposure and risk assessments of natural catastrophe’s impacts. Furthermore, the paper identifies trends and gaps in risk assessment frameworks in the field of disaster studies that can be beneficial for maritime risk research. The authors propose a new risk assessment framework that can guide future research and multi-hazard risk assessment processes at different scales of maritime risks.