Model-based design of a variable nozzle turbocharger controller

Variable Nozzle Turbocharger (VNT) was invented to solve the problem of matching an ordinary turbocharger with an engine. VNT can harness exhaust energy more efficiently, enhance intake airflow response and reduce engine emissions, especially during transient operating conditions. The difficulty of VNT control lies in how to regulate the position of the nozzle at different engine working conditions. The control strategy designed in this study is a combination of a closed-loop feedback controller and an open-loop feed-forward controller. The gain-scheduled proportional-integral-derivative (PID) controller was implemented as the feedback controller to overcome the nonlinear characteristic. As it is difficult to tune the parameters of the gain-scheduled PID controller on an engine test bench, system identification was used to identify the plant model properties at different working points for a WP10 diesel engine on the test bench. The PID controller parameters were calculated based on the identified first-order-plus-dead-time (FOPDT) plant model. The joint simulation of the controller and the plant model was performed in Matlab/Simulink. The time-domain and frequency-domain performances of the entire system were evaluated. The designed VNT control system was verified with engine tests. The results indicated that the real boosting pressure traced the target boosting pressure well at different working conditions.     

Deflection test and transmission error measurement to identify hypoid gear whine noise

T-Hypoid gears are commonly used in rear-drive and 4WD (4 Wheel Drive) vehicle axles. Investigating their sensitivity to deflections is one of the most important aspects of their design and optimization procedures. Therefore, a deflection test was performed in this study in the actual gear mounting using completely processed gear. This test covered the full operating range of gear loads from “no load” to “peak load”. Under peak load, the contact pattern extended to the tooth boundaries without showing a concentration of the contact pattern at any point on the tooth surface. The transmission error was tested under an axle assembly triaxial-real-car-load condition.     

Engine performance and toxic gas analysis of biobutanol-blended gasoline as a vehicle fuel

A comprehensive study evaluating the performance of biobutanol-blended gasoline in passenger cars was conducted because biobutanol is considered a better biofuel than bioethanol as it has no water solubility and it has a higher caloric value, giving it a higher energy value. Several kinds of samples—suboctane gasoline, 8 volume percentage and 16 volume percentage biobutanol—blended gasoline, and a 10 volume percentage MTBE-blended market sample (as the oxygencontaining gasoline)-were tested to evaluate the engine performance in terms of the detergency of the intake valves and combustion chambers, power, emissions, and fuel efficiency. Additionally, the toxicity of the emissions from these biobutanolblended samples was tested in order to assess the viability of biobutanol as one of the competitive potential substitutes for MTBE as an oxygenator in the near future. The results show that biobutanol-blended gasoline samples had relatively better detergency, relatively higher power, and similar levels of emissions compared with those of MTBE-blended gasoline. Formaldehyde was emitted from all of the samples at almost the same levels and within the error range, whereas biobutanolblended gasoline samples emitted approximately three times the amount of acetaldehyde than did the suboctane gasoline. This study shows that biobutanol is one of the best alternative bioalcohol fuels for use in the near future.     

Minimum Efficient Scale (MES) and preferred scale of container terminals

The decision on the scale of a port terminal affects the terminal’s managerial, operational and competitive position in all the phases of its life. It also affects competition structures in the port in which the terminal is operating, and has a potential impact on other terminals. Port authorities and terminal operators need to know the scale of the terminal when engaging in concession agreements. In economic theory the scale of a plant/firm is typically defined in relation to the Minimum Efficient Scale (MES), the long-run output where the internal economies of scale are fully exploited. However, there are a number of theoretical and empirical indications that in ports the scale of a terminal is commonly guided by a combination of the MES and other determining factors. The “preferred” scale is the result of a complex interaction between the MES, the port governance framework and objectives, the market size and structure, technological change and operational considerations, physical and geographical limitations, and the business patterns of shipping lines. This study analyses the factors resulting in a preferred container terminal scale that in most of the times is different from the MES. The analysis of the technical, market-related and governance-related factors is supported by theoretical and empirical insights that illustrate the presence of a range of actual ”preferred” scales of terminal concessions that usually are different, below or above, MES.     

电磁仿真技术在异步牵引电机转子优化设计中的应用

针对解析法无法对电机转子局部结构导致的损耗和励磁电流进行定量分析的问题,文章提出在采用解析法进行初步方案计算的基础上,引入电磁仿真技术,并以190 kW异步牵引电机为例,分析和计算了附加损耗以及空载电流随通风孔数量的变化,通过试验验证了采用电磁仿真技术的有效性.     

Origin–destination synthesis for aviation network data: examining hub operations in the domestic and international US markets

Hub‐and‐spoke networking is a key feature of current aviation markets in which hubs, as connecting points, function to consolidate and redistribute flows. This indicates that observation of traffic on a segment does not necessarily convey information about the origin to destination routing of passenger journeys because of the unavoidable detours in the system. This paper examines the heterogeneity of the flow composition in domestic and international US markets, which in turn allows us to observe the variation of operations across major hubs. A modified Route Flow Estimator for origin–destination synthesis (or origin–destination matrix estimation) is designed to decompose the segment traffic into itinerary‐based passenger trips. Several public and commercial databases, which are easily accessible, are exploited (and reconciled) for the model in order to (i) generate possible trip itineraries using those segment markets, and (ii) link data‐driven operational conditions with the underlying segment flows. The results are validated with US domestic trip observations and empirical knowledge related to the air transportation system. Then, the variability of the hub operations is examined based on sensitivity tests using the model parameters. From the resolution of itinerary‐based estimates, we observe that major airports' hub operations are spatially uneven, particularly with respect to domestic and international connecting passengers. Copyright © 2017 John Wiley & Sons, Ltd.     

The social context of informal commuting: Slugs, strangers and structuration

Despite considerable interest in the role of social interactions and social context on transportation, there have been very few attempts to explore specific cases of social interaction influencing transportation systems. This paper explores the social practice of slugging, an informal system of carpooling in the Washington, DC area. Slugging emerged in response to the establishment of Virginia’s High Occupancy Vehicle (HOV) lanes in the early 1970s, as single drivers picked up riders alongside the road (slugs) in order to meet the requirements for driving in the less congested HOV lanes. Drawing on the work of sociologist Anthony Giddens, as well as the sociological insights of Georg Simmel and Stanley Milgram, we suggest that the practice of slugging highlights the processes of institutionalization and structuration. This paper details how the region’s mass transportation policies and urban culture have combined to result in an institutionalized practice with particular norms and logics of behavior. We conclude that looking at specific cases where social context has affected transportation, like slugging, could provide useful insights on the impact of social context on transportation policies and systems.     

Discipline in British merchant ships

This paper describes a model which may be used in the evaluation of the relative effectiveness of policies used in the areas of ship chartering and the switching of combined carriers between the dry-cargo market and the tanker market. The policies for chartering and market switiching are expressed in the form of ‘desired proportions’ of the fleet operating in a particular charter-mode or a particular market. Graphical illustration of this form of expression of policies can be easily understood, so that alternative policies can be designed with relative case. The effectiveness of a particular from of policy under various freight market conditions can be determined from the model, the use of which is illustrated by its application to the deployment of the fleet of an hypothetical shipping company. It is assumed that the feedback connection between the company's actions and the market-place is negligible.     

将安全及环境保护置于一切之上

今天,我将冒着一定的风险来预言一些在下一世纪开始阶段,会出现在航运业内的某些事物的形态.很显然,我会着重谈一些IMO活动范围以内的事.