具有浮子的组合锚链线静力特性研究

在无流速、忽略锚链拉伸变形的条件下,对具有浮子的组合锚链线的静力特性进行理论分析,以隐函数方程的形式给出锚桩处锚链与水平线夹角的计算式,以参数方程的形式给出锚链线坐标及张力的解析解。算例表明,描述锚链线形状的参数方程是合理的。     

Application of new parameterizations of gas transfer velocity and their impact on regional and global marine CO2 budgets

One of the dominant sources of uncertainty in the calculation of air–sea flux of carbon dioxide on a global scale originates from the various parameterizations of the gas transfer velocity, k, that are in use. Whilst it is undisputed that most of these parameterizations have shortcomings and neglect processes which influence air–sea gas exchange and do not scale with wind speed alone, there is no general agreement about their relative accuracy.The most widely used parameterizations are based on non-linear functions of wind speed and, to a lesser extent, on sea surface temperature and salinity. Processes such as surface film damping and whitecapping are known to have an effect on air–sea exchange. More recently published parameterizations use friction velocity, sea surface roughness, and significant wave height. These new parameters can account to some extent for processes such as film damping and whitecapping and could potentially explain the spread of wind-speed based transfer velocities published in the literature.We combine some of the principles of two recently published k parameterizations [Glover, D.M., Frew, N.M., McCue, S.J. and Bock, E.J., 2002. A multiyear time series of global gas transfer velocity from the TOPEX dual frequency, normalized radar backscatter algorithm. In: Donelan, M.A., Drennan, W.M., Saltzman, E.S., and Wanninkhof, R. (Eds.), Gas Transfer at Water Surfaces, Geophys. Monograph 127. AGU,Washington, DC, 325–331; Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] to calculate k as the sum of a linear function of total mean square slope of the sea surface and a wave breaking parameter. This separates contributions from direct and bubble-mediated gas transfer as suggested by Woolf [Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] and allows us to quantify contributions from these two processes independently.We then apply our parameterization to a monthly TOPEX altimeter gridded 1.5° × 1.5° data set and compare our results to transfer velocities calculated using the popular wind-based k parameterizations by Wanninkhof [Wanninkhof, R., 1992. Relationship between wind speed and gas exchange over the ocean. J. Geophys. Res., 97: 7373–7382.] and Wanninkhof and McGillis [Wanninkhof, R. and McGillis, W., 1999. A cubic relationship between air−sea CO2 exchange and wind speed. Geophys. Res. Lett., 26(13): 1889–1892]. We show that despite good agreement of the globally averaged transfer velocities, global and regional fluxes differ by up to 100%. These discrepancies are a result of different spatio-temporal distributions of the processes involved in the parameterizations of k, indicating the importance of wave field parameters and a need for further validation.     

空气层结对港口细煤粉污染扩散的影响分析

通过分析空气层结对港口细煤粉扩散的影响,得出离源0.5 km处稳定层结、中性层结及不稳定层结3种层结条件下污染物的浓度峰值分别为1.3 mg/m',0.27 mg/m'和0.02 mgW,同时得出5.5 m/s,7 m/s两种风速条件下的污染物浓度峰值.结果表明,湍流处于不稳定层结时,浓度分布峰值相对较小;随着层结逐渐...     

船舶总振动固有频率实用算法

分别用一维梁有限元方法和三维有限元方法计算3艘实船总振动固有频率,对计算结果进行统计分析,提出对一维梁有限元方法计算结果的修正,利用110000t油船进行验证。用一维梁有限元方法计算时考虑剪切滞后影响系数;用三维有限元方法计算时,是在ANSYS软件中建立全船的三维空间有限元模型,进行模态分析。通过计算证明该方法能有效改进一维梁有限元计算方法,可快速准确地预报船舶总振动固有频率。     

恶劣天气红外热成像行人检测方法研究

为了提高智能汽车在恶劣天气对行人检测的速度和精度,本文提出一种基于YOLO V4的红外热成像行人检测方法.通过迁移学习对YOLO V4模型进行再训练,可快速而准确地实现恶劣道路环境的行人检测.     

A Mathematical Model of a Ship with Wings Propelled by Waves

This paper discusses mathematical modeling of a ship equipped with energy-saving wing devices. Therewith, the ship is mathematically represented by an elongated...     

基于层次分析法与模糊综合评价法的公交线路运行效率研究

运用层次分析法与模糊综合评价法相结合的方法对长沙市公交线路运行效率进行评价,为交通监管部门的决策提供依据。     

商船防海盗装置开发

介绍自行开发的商船防海盗装置.利用热释原理,采用多媒体、图像处理和计算机等技术,将视音频信号转化为数字信号,动态实时地监控船舶及其周围状况.该装置由传感器、信号传输装置、主控制器和报警执行机构等组成.系列产品具有支持多路视音频,全天候实时动态侦测及联动自动报警,实时数据库管理、操作多级管理、操作日志与报警日志管理等功能.     

3D-Printed Porous Titanium Augments for Reconstruction of Massive Bone Defect in Complex Revision Total Knee Arthroplasty:Implant Design and Surgical Technique

Reconstruction of severe bone defects in revision total knee arthroplasty(TKA)remains a challenge for orthopaedists.The progression of medical imaging and addit...     

汽车内饰件VOC散发规律及控制

以门饰板总成为目标进行分解研究,对总成及其子级件的VOC含量进行分析发现不同材料和工艺对总成VOC的权重表现依次是PP类、表皮包覆类零件、表面处理类零件。其中PP作为用量最大的材料,直接关系到整个总成的VOC表现;TPO表皮、针织面料是目前相对环保的表皮类型;在一些非外观的骨架材料方面,本体法ABS相比于乳液法ABS具有一定的优势;相比溶剂胶和热熔胶,水性胶是成本和性能综合优势明显的胶粘剂类型。