Dual extended Kalman filter for vehicle state and parameter estimation

The article demonstrates the implementation of a model-based vehicle estimator, which can be used for combined estimation of vehicle states and parameters. The estimator is realised using the dual extended Kalman filter (DEKF) technique, which makes use of two Kalman filters running in parallel, thus 'splitting' the state and parameter estimation problems. Note that the two problems cannot be entirely separated due to their inherent interdependencies. This technique provides several advantages, such as the possibility to switch off the parameter estimator, once a sufficiently good set of estimates has been obtained. The estimator is based on a four-wheel vehicle model with four degrees of freedom, which accommodates the dominant modes only, and is designed to make use of several interchangeable tyre models. The paper demonstrates the appropriateness of the DEKF. Results to date indicate that this is an effective approach, which is considered to be of potential benefit to the automotive industry.     

Modelling of wheels and rail discontinuities in dynamic wheel-rail contact analysis

A classification of wheel-rail contact is given. Difference is made between modelling of a running wheel with continuous single-point-contact, as is common practice in wheel-rail contact analysis, and a wheel with transient double- or multi-point-contact, which may occur for rail irregularities with curvatures larger than that of the wheel circumference. It is shown that application of the first model for these irregularities will strongly underestimate the contact forces as it does not describe occurring mechanisms correctly. Further, it is shown that in principle it is not possible to describe the second type of contact fully correct with a lumped wheel model. Both wheel models are formulated mathematically for some basic contact cases. Afterwards, results are applied to a linear track model. Analytical closed-form solutions are found in the frequency domain for arbitrary type of contact and numerically transformed to the time domain. Finally, the necessity is shown to avoid situations where transient multiple-point-contact may occur (like rail joints) in practice.     

Tractor-semitrailer model for vehicles carrying liquids

This article presents a model for solving solid-fluid interactions in vehicles carrying liquids. A tractor-semitrailer model is developed by incorporating suspension systems and tire dynamics. Owing to the solid-fluid interaction, equations of motion for the vehicle system are coupled. To simplify the complicated solution procedure, the coupled equations are solved separately using two different codes. Each code is analyzed separately; but as the parameters of the two codes depend on each other, the codes must be connected at the end of each time step. To determine the dynamic behavior of the system, different braking moments are applied. As the braking moments increase, braking time decreases. However, it turns out that increasing the braking moment to more than a certain level produces no significant results. It is also shown that vehicles carrying fluids need a greater amount of braking moments in comparison to vehicles carrying solids during braking. In addition, as the level of the fluid inside the tanker increases, from one-third to two-third of the tanker's volume, the sloshing forces applied to the tanker's walls increase. It was also concluded that the strategy used in this article to solve for the solid-fluid interaction by incorporating vehicle dynamic effects represents an effective method for determining the dynamic behavior of vehicles carrying fluids in other critical maneuvers.     

The Impact of Travel Time Information on Travelers’ Learning under Uncertainty

In this work, laboratory experiment was conducted in order to evaluate the effect of feedback on decision-making under uncertainty, with and without provided information about travel times. We discuss the prediction of travelers’ response to uncertainty in two route–choice situations. In the first situation travelers are faced with a route–choice problem in which travel times are uncertain but some external information about routes’ travel times is provided. The second situation takes place in a more uncertain environment in which external information about travel times is not provided, and the travelers’ only source of information is their own experience. Experimental results are in conflict with the paradigm about traveler information systems: As a consequence of information, the propensity of travelers to minimize expected travel time is not necessarily increased. Providing travelers with static information about expected travel times reveals an increase in the heterogeneity of travelers’ choices and reduces the maximization rate.     

Effects of the Los Angeles transit strike on highway congestion

In this paper we investigate the effect of the Los Angeles transit strike on highway congestion through analysis of highway sensor data, using both a before-and-after comparison, and a control group comparison. We found that average 5:00 a.m. to 10:00 p.m. traffic speeds declined by as much as 20% during the strike, and the average length of the rush period increased by as much as 200%, even though increases in traffic were small, despite the fact that transit riders constitute a small fraction of the traveling population. Speeds declined the most at locations upstream from the places where queues normally end. We believe that highways are especially susceptible to congestion during strikes because travelers have little opportunity to adjust and equilibrate their travel patterns, as is possible during ordinary periods of traffic growth.     

亚硝胺

与二烯烃橡胶相比，EPDM的双键很少：为了提高EPDM胶料的硫化速度，需要加入大量的促进剂。由于某些促进剂中含有仲胺，这是亚硝胺的主要来源，因此人们正在考虑使用一类新的促进剂。考察了不同硫化体系对亚硝胺排放、加工参数和物理性能的影响，片采用试验设计方法对硫化体系进行了优化。     

桥梁景观CI理论及实践

分析桥梁景观CI理论的提出背景,以德清英溪大桥景观设计的工程实践为例,尝试运用企业 CI理论知识,在国内桥梁景观理论界第一次系统阐述桥梁景观 CI的概念,其构成要素,运用等内容,以形成桥梁景观 CI理论体系,使桥梁景观设计更具有独特性、统一性、系统性。     

桥梁地基部分被淘蚀后的稳定性研究

处于斜坡上的桥梁地基常会受到冲刷淘蚀而使基底面积减小,对桥基造成不利影响。针对这一情况,研究淘蚀形状不规则的桥基稳定性计算方法和计算公式。     

基于随机模拟的RBT与BRT冲突延误计算

以边侧型快速公交系统（BRT）为研究对象，给出一种计算由常规公交系统（RBT）与（BRT）冲突造成延误的方法，该方法运用Matlab编程技术和随机模拟技术，文章介绍了应用这一方法的计算实例。     

YC4108Q柴油机机体的动态特性分析及结构改进

以广西玉柴最新开发的YC4108Q柴油机机体为研究对象。通过试验模态分析，获得了机体的基本振型和相关频率；以试验数据为依据，结合三维CAD软件UG和大型结构分析软件MSS.NASTRAN的优势，通过应用不同的单元划分网格进行比较，建立了机体的三维有限元动态计算模型；利用已建模型，对机体结构进行了分析并得到改进方案。