A Study in Port Planning: The Example of Mina Zayed

The correct number of berths that a port should provide is solved by a model which minimizes the total port usage cost in terms of the costs of berth provision and the costs accruing to ships from time spent in the port. This model is then applied to Mina Zayed in the Arabian Gulf as an aid to future planning, and from different sets of cargo forecasts an optimal stategy is derived using a game-theoretic approach.     

Remoteness and accessibility in the vulnerability analysis of regional road networks

This paper considers the development of a method for network vulnerability analysis which considers the socio-economic impacts of network degradation and seeks to determine the most critical locations in the network. The method compares the levels of remoteness (or its inverse, accessibility) of localities within the study region, on the basis of the impacts of degradation of the road network on a recognised accessibility/remoteness index that can be applied to each and every location within the region. It thus extends the earlier work on accessibility-based vulnerability analysis which was limited to assessment of impacts on selected nodes in a network. The new method allows study of impacts on both specified locations (which do not have to be represented as network nodes) and the region as a whole. The accessibility/remoteness index is defined so that an accessibility surface can be calculated for the region, and the volume under this surface provides an overall measure of accessibility. Changes in the volume under different network states thus reflect the overall impacts. The method is applied to a rural region in south east Australia.     

The impact of job assignment rules for straddle carriers on the throughput of container terminals

Straddle carriers represent a critical resource in the handling of containers within a container terminal. It is essential that they are deployed in an as efficient manner as possible. The research presented in this paper is motivated by the need to critically evaluate job assignment rules for straddle carriers that operate in a multiple straddle environment. This is achieved by developing a discrete event simulation model using industrial simulation software to model a container terminal located in Melbourne, Australia. The model accounts for variables such as the number of straddle carriers needed, the speed of straddle carriers, the arrival rate of trucks, and the job assignment rule. A principal finding of the study is that increasing the number of straddles in the present set‐up from 6 to 7 has a negligible effect on daily throughput. However, an increase in the number of straddles to 7 is expected to have a profound effect on reducing the average waiting time of trucks within the terminal from over 16 minutes to under 9 minutes, a decrease of 46.5%. However, a further increase in the number of straddles results in no further increase in daily throughput. It was observed that the throughput of the terminal is very sensitive to the speeds at which straddles travel. The management of the terminal has proposed a new heuristic job assignment rule for straddles, because the present rule does not assign the jobs to straddles closest to the truck requesting to load or unload a container. As a result a new heuristic job assignment rule was tested. The simulation results revealed that both the old and new rules performed equally well using performance indicators such as average container flow time, daily throughput, average waiting time of jobs, number of jobs in the queue, and straddle utilisation. Therefore, the new rule will not improve these performance measures if implemented     

The construction and use of continuous autoregressive models for traffic indices

This article discusses the use of continuous autoregressive models to describe the behavior of traffic indices. From discretely sampled data, second-order differential equation models are constructed to represent dynamic traffic fluctuations as the response of a linear system to a stochastic forcing function. The results are compared to the more common M/G/∞ queueing model approach, and the analysis is demonstrated on time series of aircraft concentration in thirty-one enroute air traffic control sectors.     

将安全及环境保护置于一切之上

今天,我将冒着一定的风险来预言一些在下一世纪开始阶段,会出现在航运业内的某些事物的形态.很显然,我会着重谈一些IMO活动范围以内的事.     

Finite element modeling of suction anchors under combined loading

Suction anchors are subjected to inclined, quasi-horizontal or quasi-vertical loadings. The type of the structure and depth of water govern the inclination of the load. Under this load condition, suction anchor experiences a combination of horizontal and vertical translations, and rotation. Therefore the soil's reaction to this load condition can be idealized as horizontal and vertical loadings, together with a moment. The magnitude and combination of the reactions depend on the load inclination, soil property and the point at which the load is applied. The behavior of the suction anchor subjected to the combined V–H-M loading is elaborated in this paper. This is to observe the effects of soil properties on the failure mechanism and ultimate capacity of the foundation. This was achieved by applying the pure horizontal and vertical displacements, and rotation and their combinations to the foundation, on V–H, V-M and H-M spaces and the yield-locus created for each space. The general purpose finite element program DIANA was used for this study. Non-linear analysis was conducted using a simplified elastic-perfectly-plastic model with Von-Mises yield criterion for saturated and consolidated clay.     

In-car power line communications: Advanced transmission techniques

The increasing number of electronic control units (ECUs) inside a vehicle implies the need to develop and deploy on board robust, low latency and low complex telecommunication systems. In this respect, power line communications (PLC) is an attractive solution. The benefits provided by the introduction of power line communications in the in-car environment are multiple and they are related to the possibility of exploiting the existing and capillary wiring infrastructure to simplify the design of the in-vehicle data network (IVN) and, more importantly, to save weight and cost of the wiring harness. In this paper, we deal with the analysis of the performance achievable by applying innovative advanced modulation techniques to in-car measured power line channels, i.e., multicarrier (MC) and impulsive ultra wideband (I-UWB) modulation. We show that for low speed command and control applications, I-UWB is suitable since it requires lower power and lower computational efforts w.r.t. MC systems. Furthermore, we study the design of the optimal transmitted pulse to further improve the performance of I-UWB.     

Exhaust emissions and its control methods in compression ignition engines: A review

Extensive usage of automobiles has certain disadvantages and one of them is its negative effect on environment. Carbon dioxide (CO₂), carbon monoxide (CO), hydrocarbons (HC), oxides of nitrogen (NO_x), sulphur dioxide (SO₂) and particulate matter (PM) come out as harmful products during incomplete combustion from internal combustion (IC) engines. As these substances affect human health, regulatory bodies impose increasingly stringent restrictions on the level of emissions coming out from IC engines. This trend suggests the urgent need for the investigation of all aspects relevant to emissions. It is required to modify existing engine technologies and to develop a better after-treatment system to achieve the upcoming emission norms. Diesel engines are generally preferred over gasoline engines due to their undisputed benefit of fuel economy and higher torque output. However, diesel engines produce higher emissions, particularly NO_x and PM. Aftertreatment systems are costly and occupy more space, hence, in-cylinder solutions are preferred in reducing emissions. Exhaust gas recirculation (EGR) technology has been utilized previously to reduce NO_x. Though it is quite successful for small engines, problem persists with large bore engines and with high rate of EGR. EGR helps in reducing NO_x, but increases particulate emissions and fuel consumption. Many in-cylinder solutions such as lower compression ratios, modified injection characteristics, improved air intake system etc. are required along with EGR to accomplish the future emission norms. Modern combustion techniques such as low temperature combustion (LTC), homogeneous charge compression ignition (HCCI), premixed charge compression ignition (PCCI) etc. would be helpful for reducing the exhaust emissions and improving the engine performance. However, controlling of autoignition timing and achieving wider operating range are the major challenges with these techniques. A comprehensive review of diesel engine performance and emission characteristics is given in this paper.     

T��l��phoner au volant : impact sur la conduite et risque d��accident, une revue de la litt��rature

This paper gives a literature review from experimental, epidemiological and naturalistic studies, having tried to measure on the one hand, the impact of mobile phone use on driving and, on the other hand, the risk of accident associated with this practice. The overview of these studies allowed first of all to show that the driving task is altered during the period of mobile phone use, and to quantify the disturbance (experimental studies), then to verify that this disturbance can be at the origin of accidents and quantify this risk (epidemiological studies). The naturalistic studies, consisting in following-up fleet vehicles, give some more explanations and tend to confirm the results. Advantages and limits of each approach are also discussed.