Study of an optimized gas strut layout to improve opening and closing quality

The most important factor in gas strut design is determining an optimized layout. If the layout is not optimized, vehicle operators will have a suboptimal experience when opening and closing the tailgate. A poor layout of the gas struts causes operators to work excessively when they open/close the tailgate, and vehicle owners will incur additional expenses due to deterioration in the body quality of the vehicle. Thus, an optimized gas strut layout is very important, even if it does not seem interesting. This paper describes the tailgate operation process and focuses on determining an optimized gas strut layout for opening/closing the tailgate easily.     

High-strain-rate fracture of adhesively bonded composite joints in DCB and TDCB specimens

Double-cantilever beam (DCB) and tapered double-cantilever beam (TDCB) specimens are the test configurations most commonly used to measure the fracture toughness of composites and adhesive joints. Strain rates of 1 to 18.47 m/s were applied to the test specimens via high-speed hydraulic test equipment. Because the fracture occurs through the adhesively bonded joints and the cracks grow rapidly, the crack length and beam displacement were recorded by a high-speed camera. An energy range from 0 to 10 J was often observed in the high-strain-rate fracture experiments for nonlinear plastic behavior of the dynamically loaded adhesively bonded DCB and TDCB specimens. The range of energy release rates (fracture energy) for TDCB specimen was 2 to 3 times higher than that of a DCB specimen for all high strain rates. The fracture energy of automotive adhesive joints can be estimated using the experimental results in this study for the fracture toughness (G_IC) under high rates of loading. The crack grows as the applied fracture energy exceeds the value of the critical energy release rate (G_IC) at the crack tip. The energy release rate was calculated using the fracture mechanics formula. The key fracture mechanics parameter, the fracture energy GIC, was ascertained as a function of the test rate and can be used to assess and model the overall joint performance.     

Impact of phytoplankton community size on a linked global ocean optical and ecosystem model

We isolated the effect phytoplankton cell size has on varying remote sensing reflectance spectra (R_rs(λ)) in the presence of optically active constituents by using optical and radiative transfer models linked in an offline diagnostic calculation to a global biogeochemical/ecosystem/circulation model with explicit phytoplankton size classes. Two case studies were carried out, each with several scenarios to isolate the effects of chlorophyll concentration, phytoplankton cell size, and size-varying phytoplankton absorption on R_rs(λ). The goal of the study was to determine the relative contribution of phytoplankton cell size and chlorophyll to overall R_rs(λ) and to understand where a standard band ratio algorithm (OC4) may under/overestimate chlorophyll due to R_rs(λ) being significantly affected by phytoplankton size. Phytoplankton cell size was found to contribute secondarily to R_rs(λ) variability and to amplify or dampen the seasonal cycle in R_rs(λ), driven by chlorophyll. Size and chlorophyll were found to change in phase at low to mid-latitudes, but were anti-correlated or poorly correlated at high latitudes. Phytoplankton size effects increased model calculated R_rs(443) in the subtropical ocean during local spring through early fall months in both hemispheres and decreased R_rs(443) in the Northern Hemisphere high latitude regions during local summer to fall months. This study attempts to tease apart when/where variability about the OC4 relationship may be associated with cell size variability. The OC4 algorithm may underestimate [Chl] when the fraction of microplankton is elevated, which occurs in the model simulations during local spring/summer months at high latitudes in both hemispheres.     

TRANSCRIPTION ACTIVATION BY HBV PRE SI PROTEIN

ＴＲＡＮＳＣＲＩＰＴＩＯＮＡＣＴＩＶＡＴＩＯＮＢＹＨＢＶＰＲＥＳＩＰＲＯＴＥＩＮＸｉａｏＳｈｅｎｇｘｉａｎｇ；Ｔ．Ｓ．Ｂ．Ｙｅｎ（ＬａｂｏｒａｔｏｒｙｏｆＭｏｌｅｃｕｌａｒＰａｔｈｏｌｏｇｙ，ＤｅｐａｒｔｍｅｎｔｏｆＰａｔｈｏｌｏｇｙ，Ｕｎｉｖ．ｏｆ...     

垂直及斜出水流场的二维及三维TR-PIV试验

本文对钝头回转体垂直及斜出水流场采用TR-(Time-Resolved)PIV技术进行测量,并对斜出水流场进行3D-Stereo PIV(三维体视 PIV)测量.文中介绍了测试技术及测量结果,揭示了出水过程中流动结构及其演变,展示了TR-PIV技术对具有瞬态历程特征的出水流场研究的适应性.     

In situ colonization of marine biofilms on UNS S32760 duplex stainless steel coupons in areas with different water qualities: Implications for corrosion potential behavior

In the presence of biofilms, stainless steels （SS） exhibits an increase in corrosion potential, called ennoblement. In the present study, the corrosion potential （Eco,） behavior of the duplex SS UNS S32760 was recorded simultaneously with the in situ marine biofilm formation in two areas at Arraial do Cabo, Southeastern Brazil. The biofilm at Forno Harbor （an anthropogenically disturbed area） was characterized by higher relative abundances of Bacteria at day 2, followed by diatoms （especially Navicula sp.） on day 10 and dinoflagellates on day 18, whereas no clear trend was recorded at Cabo Frio Island （an undisturbed area）. The ennoblement of Ecor values was site-dependent. In a complementary laboratory assay, biofilms were removed and the Eco values registered in sterile conditions for the subsequent 10 days and corroborated in situ results. Understanding biofilms and SS interactions has important implications for materials science and engineering decisions as well as helping to fill in imnortant gaps in this knowledge.     

Implementation of discharging/charging current sensorless state-of-charge estimator reflecting cell-to-cell variations in lithium-ion series battery packs

This paper offers novel insights to the design and implementation of an innovative state-of-charge (SOC) estimator for the lithium-ion (Li-Ion) series battery pack. The most interesting feature of this approach is that it can utilize information from each filtered terminal voltage of the Li-Ion cells connected in series for SOC estimation of the battery pack. Without actual sensing each discharging/charging current (DCC) applied to the Li-Ion cells, it is possible to extract each DCC estimation from the corresponding filtered terminal voltages with an equivalent electrical circuit model (EECM) identification of all Li-Ion cells in the battery pack. There are two advantages to SOC estimation of the battery pack with this approach. First, the proposal can be implemented simply and effectively, reducing the computational steps required for SOC estimation. By reducing computational steps, the proposal is expected to be more cost-effective. Second, the approach guarantees an improved SOC performance, even if the battery pack results in inevitable cell-to-cell variation among Li-Ion cells. Accordingly, there are fewer differences to previously estimated DCCs among Li-Ion cells. Specifically, all values from the estimated DCCs are properly compensated for by simultaneous parameter modification according to each cell’s electrochemical characteristics. Experimental results clearly demonstrate that our DCC sensorless SOC estimator provides robust SOC performance for the battery pack. This approach considered an experimental battery pack (12S1P) connected in series using 2.6 Ah LiCoO2 cells produced by Samsung SDI.     

Influence of load and inflation pressure on the tyre rolling resistance

Tyre load and inflation pressure are important factors controlling rolling resistance of road vehicles. The article presents results obtained in the Technical University of Gdańsk during laboratory and road measurements of different car tyres rolling on different pavements. The knowledge of rolling resistance characteristics is important for modelling car dynamics as well as fuel consumption. It is also necessary to establish proper test conditions in the future standardized on-road method of measuring rolling resistance. The results indicate that while an increase of load always leads to the increase of rolling resistance force, the influence on Coefficient of Rolling Resistance is more complicated and unpredictable. They also indicate that tyres with high rolling resistance are more sensitive to inflation pressure changes than low rolling resistance tyres.     

Creating bus timetables with maximal synchronization

This paper addresses the problem of generating a timetable for a given network of buses so as to maximize their synchronization. It attempts to maximize the number of simultaneous bus arrivals at the connection (transfer) nodes of the network. Transit schedulers, taking into account the satisfaction and convenience of the system's users, appreciate the importance of creating a timetable with maximal synchronization, which enables the transfer of passengers from one route to another with minimum waiting time at the transfer nodes. In this paper, the problem is formulated as a mixed integer linear programming problem, and a heuristic algorithm is developed to solve the problem in polynomial time. The efficiency of this algorithm, compared to optimal solutions, is illustrated through a series of examples.