Development of quantitative measuring technique to find critical flow conditions for preventing soot deposit accumulated in the diesel exhaust system using main muffler composed of three chambers

If a vehicle that meets emission regulations operates sufficiently for a long time under low speed and low load conditions, soot contained in the exhaust gas is accumulated on the inner surface of the exhaust system. This soot deposition problem occurs frequently in all diesel cars. However, when a vehicle is placed under the conditions of sudden start and sudden acceleration after city mode driving for a long time, the deposited soot is abruptly blown up with the soot produced during fuel combustion. In the present study, the main cause of the abrupt outburst of deposited soot is investigated to overcome this adverse phenomenon. First, we developed a method to quantify the amount of the exhausted soot particles (or the accumulated soot particles) by measuring the opacity that represents the contamination level of the exhaust gas due to soot particles. Using this measuring scheme for deposited soot, we found the critical conditions for engine speeds and load conditions at which soot particles are emitted into the air without accumulation in the exhaust system using main muffler composed of three chambers. In order to meet these critical conditions and thus to drastically reduce soot accumulation, the exhaust system using the main muffler applied in this study must be designed to ensure that the flow velocity of the exhaust gas is higher than 62 m/s when the back pressure at the exit of the turbocharger is under 0.08 bars.     

Lane change algorithm for autonomous vehicles via virtual curvature method

This paper addresses the lane changing problem of autonomous vehicles when there is no road infrastructure support. The autonomous vehicle should drive from the current lane to the adjacent lane in the absence of a reference path to guide the vehicle to the new lane. We suggest an algorithm that incorporates a virtual road curvature with bicycle model for lane change guidance. As the name suggests, the virtual road curvature does not physically exist. It is a user assigned radius of a curved path which connects the current lane to the adjacent lane. Since the lateral sensor readings during lane changing maneuver are erroneous, the steering angle along with the virtual curvature is fed into a bicycle model to estimate the lateral position during the transition to the next lane. Details of the algorithm and the virtual road curvature determination are presented in the paper. In contrast to other lane changing methods, controller switching is not required and the same controller is for both lane keeping and lane changing. The algorithm is verified experimentally and the results are comparable with lane changing with physical transition lane.     

An efficient algorithm for building min-path trees for all origins in a multi-class network

Urban transportation planning models consume untold hours of computer time building zillions of min-path trees. Their networks have tens of thousands of arcs, accommodate several trip classes, and solve the traffic equilibrium problem via many, many iterations of min-path calculations for thousands of origins and destinations. This paper presents a simple algorithm that couples restricted reduced-cost analysis with label-correcting, which can reduce this min-path tree building time substantially. For a given origin, the algorithm rapidly transforms a tree for one class to that for next class. Test results using synthetic data suggest that its application to real networks should experience speedups of at least a factor of 2.0 and perhaps beyond 5.0.     

Comparative analysis between operational weather prediction models and QuikSCAT wind data near the Galician coast

Wind measurements from SeaWinds scatterometer on the NASA QuikSCAT satellite and wind forecasts from two different operational numerical models provided by MeteoGalicia were compared for a 4-year period (2002–2005) in Galician coast environment. Available wind data buoy measurements were also used to complement the analysis. A statistical analysis based on mean errors, root mean square errors and complex correlation was performed from spatial, temporal and directional points of view.In the spatial comparison no significant differences between models and satellite were observed and the error magnitudes of the models are compatible with typical QuikSCAT errors. The suitability of satellite wind estimations for data assimilation in these models must be further investigated. Negative bias of models with respect to the satellite was also confirmed with buoy data, in such a way that models overestimation is smaller than the satellite one. Big errors in wind direction appear in southeasterly and southwesterly winds for both satellite and models, contributing to high RMSE values when compared to buoy data. These errors were mainly attributed to the effect of insufficient spatial resolution near shore.     

The vertical disintegration of ship management: choice criteria for third party selection and evaluation

An assessment of the rationale for the vertical disintegration of ship management suggests that there might be compelling economic benefits for the separation of ownership from management. In this context, as a means for developing effective marketing strategies, it is important for ship managers to know the criteria used by current and prospective clients for ship manager selection and evaluation. The aim of this paper is to empirically identify the dimensions for ship manager selection and performance evaluation and their relative importance and to discuss the implications for marketing emanating from such an assessment. The methodology adopted includes the collection of secondary and primary data, both from ship managers and their clients, using interviews and a mail survey. The results indicate the prevailing importance of certain dimensions in selection (e.g. technical ability, reputation, competency) and evaluation (responsiveness, trustworthiness, technical ability), whereas it also found that price alone is not perceived to be as important in ship manager selection. It is concluded that placing emphasis on such dimensions in the formulation of a marketing strategy will contribute towards the attraction and retention of clients, whereas cost-cutting measures to allow price reduction, as well as advertising, will be ineffective over the long term.     

Resolving the impact of short-term variations in physical processes impacting on the spawning environment of eastern Baltic cod: application of a 3-D hydrodynamic model

Variations in oxygen conditions below the permanent halocline influence the ecosystem of the Baltic Sea through a number of mechanisms. In this study, we examine the effects of physical forcing on variations in the volume of deep oxygenated water suitable for reproductive success of central Baltic cod. Recent research has identified the importance of inflows of saline and oxygenated North Sea water into the Baltic Sea for the recruitment of Baltic cod. However, other processes have been suggested to modify this reproduction volume including variations in timing and volume of terrestrial runoff, variability of the solubility of oxygen due to variations in sea surface temperature as well as the influence of variations in wind stress. In order to examine the latter three mechanisms, we have performed simulations utilizing the Kiel Baltic Sea model for a period of a weak to moderate inflow of North Sea water into the Baltic, modifying wind stress, freshwater runoff and thermal inputs. The model is started from three-dimensional fields of temperature, salinity and oxygen obtained from a previous model run and forced by realistic atmospheric conditions. Results of this realistic reference run were compared to runs with modified meteorological forcing conditions and river runoff.From these simulations, it is apparent that processes other than major Baltic inflows have the potential to alter the reproduction volume of Baltic cod. Low near-surface air temperatures in the North Sea, the Skagerrak/Kattegat area and in the western Baltic influence the water mass properties (high oxygen solubility). Eastward oriented transports of these well-oxygenated highly saline water masses may have a significant positive impact on the Baltic cod reproduction volume in the Bornholm Basin.Finally, we analysed how large scale and local atmospheric forcing conditions are related to the identified major processes affecting the reproduction volume.     

Modelling the silica pump in the Permanently Open Ocean Zone of the Southern Ocean

A coupled 1D physical–biogeochemical model has been built to simulate the cycles of silicon and of nitrogen in the Indian sector of the Permanently Open Ocean Zone of the Southern Ocean. Based on a simplified trophic network, that includes two size classes of phytoplankton and of zooplankton, and a microbial loop, it has been calibrated by reference to surface physical, chemical and biological data sets collected at the KERFIX time-series station (50°40′S–68°25′E). The model correctly reproduces the high nutrient low chlorophyll features typical of the studied area. In a region where the spring–summer mixed layer depth is usually deeper than 60 m, the maximum of chlorophyll never exceeds 1.5 mg m⁻³, and the annual primary production is only 68 g C m⁻² year⁻¹. In the surface layer nitrate is never exhausted (range 27–23.5 mmoles m⁻³) while silicic acid shows strong seasonal variations (range 5–20 mmoles m⁻³). On an annual basis 71% of the primary production sustained by nanophytoplankton is grazed by microzooplankton. Compared to North Atlantic, siliceous microphytoplankton is mainly prevented from blooming because of an unfavourable spring–summer light-mixing regime. Silicic acid limitation (high half saturation constant for Si uptake: 8 mmoles m⁻³) also plays a major role on diatom growth. Mesozooplankton grazing pressure excerpts its influence especially in late spring. The model illustrates the efficiency of the silica pump in the Southern Ocean: up to 63% of the biogenic silica that has been synthetized in the photic layer is exported towards the deep ocean, while only 11% of the particulate organic nitrogen escapes recycling in the surface layer.     

Locating new passenger facilities on a transportation network

This paper examines the problem of locating additional passenger facilities on a transportation network to supplement ones that already exist. A distinction is made between “supporting” facilities which operate only in concert with already existing ones and “new” facilities which are self-sufficient and operate independently. It is shown that, when the objective is to maximize the utility of travel times to all users, at least one set of optimal locations for the new facilities exist on the nodes of the network if the utility function for travel times is convex. This result is proven under very general conditions including the assumption of a probabilistic transportation network, i.e. a network where travel times on network branches are random variables. A straightforward algorithm for solving a specific simple case is also provided and the results are illustrated by examples.     

Hydrology, sediment yield, erosion and sedimentation rates in the estuarine environment of the Ria de Vigo, Galicia, Spain

The aim of this study is to provide a budget study with calculated erosion rates. Three methods have been used to calculate sediment yield and denudation rates in the Ria de Vigo: (1) measurements of sediment loads, (2) measurements of sediment accumulation rates at the coast, (3) theoretical calculations of potential denudation. Sediment loads and water discharge were measured over a period of 14 months from May 1997 to July 1998. Two of the tributaries entering the Ria de Vigo were monitored for 12 more months, from May 2000 to May 2001, to observe changes in discharge and sediment loads. This period corresponded with atypical precipitation, with peak monthly values (600 mm) three times higher than those on record.Water rating curves are typically exponential. Suspended and dissolved loads vary for different rivers, showing values of 1.5 to 130 mg/l during 1997/1998. For 2000/2001, these values are twice as high. Suspended load versus discharge relationships for 1997/1998 were logarithmic, but data from 2000/2001 does not fit the same equation. Dissolved loads are several times higher than suspended loads in almost all cases. Dissolved load concentrations vary more widely with discharge than suspended loads. This is probably due to local pollution and contamination from marine spray in areas closer to the sea.Second, erosion rates and bed load sediment yields were calculated from accumulation rates at the Ramallosa Complex. Well-preserved estuarine and tidal sediments, associated with the Minor River, have accumulated in this area during the Holocene. ¹⁴C ages allow calculation of sedimentation rates (SR) for two intervals. The lower interval extends from 2001 to 484 years BP and yields an SR of 1.12 mm/a. The upper interval extends from 484 years BP to the present and has an SR of 3.3–4.4 mm/a. These differences may be explained by basin dynamics as the beach progressively encloses the area and also by human interference. From sedimentary facies analysis it is concluded that 90% to 95% of the accumulated deposits were transferred to the basin as bed load. Muddy deposits (mostly marshes) are better developed at the upper part of the sediment pile, and inner areas, indicating a progressive shallowing and filling up of the basin. Most of suspended load is exported to the ria, whereas the Ramallosa Complex acts as a sediment sink for bed load derived material.Calculated potential erosion rates using Ahnert's [Am. J. Sci. 268 (1970) 243] equation show lower values than those estimated from river load concentrations. Potential erosion rates for the Minor River are higher than for the Lagares River which contrast with mechanical denudation rate values from river loads during 1997/1998 which are higher for the Lagares River. During 2000/2001 MDR values were higher than those of the potential erosion rates for both rivers, in line with the extremely high precipitation. Higher values in the Lagares could be in part due to human interference.     

Experimental and numerical investigation of fuel mixing effects on soot structures in counterflow diffusion flames

Experimental and numerical analyses of laminar diffusion flames were performed to identify the effect of fuel mixing on soot formation in a counterflow burner. In this experiment, the volume fraction, number density, and particle size of soot were investigated using light extinction/scattering systems. The experimental results showed that the synergistic effect of an ethylene-propane flame is appreciable. Numerical simulations showed that the benzene (C₆H₆) concentration in mixture flames was higher than in ethylene-base flames because of the increase in the concentration of propargyl radicals. Methyl radicals were found to play an important role in the formation of propargyl, and the recombination of propargyl with benzene was found to lead to an increase in the number density for cases exhibiting synergistic effects. These results imply that methyl radicals play an important role in soot formation, particularly with regard to the number density.