Research on the Influence of Vertical Deformation of Bridge on the Track RegularityEI北大核心

Research purposes: The vertical deformation of high-speed railway (HSR) bridge will cause the track irregularity, which threatens the safe and efficient operation of the HSR. Taking the 32 m simple supported beam bridge as the research object, based on the existing mapping analytical model for bridge vertical deformation and rail geometry, the influence of the track regularity of the CRTS Ⅰ slab ballastless track structure caused by the key parameters such as the bridge vertical deformation amplitude, the hanging length of the beam end and the vertical stiffness of mortar layer were studied, and the corresponding measures to control the rail deformation were proposed, to provide theoretical reference for comprehensive treatment of rail deformation of HSR bridge. Research conclusions:(1) The pier settlement, the vertical rotation of the beam end and the beam fault will cause the rail to follow the beam deformation, and "up-warping" of the rail on the vertical deformation boundary will appear. (2) The rail deformation is directly proportional to the vertical deformation amplitude of the bridge and the key to control the rail deformation is to reduce the vertical deformation of the bridge. (3) The rail deformation can be controlled by reducing the hanging length of beam and vertical stiffness of mortar layer. (4) The research results can provide a theoretical reference for controlling the vertical rail deformation of high-speed railway bridges. © 2018, Editorial Department of Journal of Railway Engineering Society. All right reserved.     

The Reinforcement Analysis of Prestressed Anchor Frame Beam in the Deep Cutting Slope under Three Dimensional Strong EarthquakeEI北大核心

Research purposes: In order to further study the reinforcement of prestressed anchor frame beam in the deep cutting slope under three dimensional strong earthquake, a model of the deep cutting slope is built through FLAC 3D simulation software, the seismic wave to the model from three directions of x,y and z is input, and the dynamic response of the slope is analyzed. Then, the prestressed anchor frame beam reinforcement measures are applied to the model, and this paper analyzes the reinforcement effect of the prestressed anchor frame beam to the deep cutting slope under three dimensional strong earthquake. Research conclusions:(1) The prestressed anchor frame beam has a good effect on restraining the horizontal displacement of the deep cutting slope. (2) Under the three dimensional strong earthquake, the prestressed anchor frame beam has a good effect on the horizontal acceleration and horizontal velocity of the deep cutting slope, which reduces the peak of horizontal acceleration and horizontal velocity. (3) Through the comparison of the response before and after the reinforcement of the prestressed anchor frame beam is given under the 9 degrees three dimensional strong earthquake, it can be concluded that the prestressed anchor frame beam can provide good reinforcement effect to the deep cutting slope. (4) This research can be used for reference to the earthquake resistance of the slope engineering. © 2018, Editorial Department of Journal of Railway Engineering Society. All right reserved.     

曲线对高速货车转向架焊接部件疲劳损伤的影响

依据UIC510—3:1994规定的疲劳试验加载方法,基于有限元法研究了不同左右曲线变换次数取值时高速货车转向架焊接构架及摇枕疲劳关注部位累积损伤的变化程度及规律。仿真结果及综合分析表明,当左右曲线变换次数取值变化并不十分显著时,其对结构疲劳损伤影响很小,样机疲劳试验中可直接应用UIC规范中的建议值。     

JC型弹性旁承体安装时侧翼橡胶层应力分析

对目前货车转向架装用的JC型双作用弹性旁承体进行了非线性有限元计算,分析了旁承体两侧翼橡胶层在安装及工作时的应力,给出了JC型双作用弹性旁承体在安装时的相关建议。     

出口马达加斯加米轨转向架的研制

介绍了出口马达加斯加米轨转向架的主要技术参数、结构特点及有关计算和试验情况.     

主动导向转向架的多体动力学仿真与试验研究

对主动导向转向架的半车模型进行了多体动力学计算,并进行了滚动台试验,计算结果和试验结果基本一致。将半车模型扩展为整车模型后,进行了计算分析,研究结果表明,主动导向转向架可以大大提高转向架的曲线通过性能。     

牵引变电所换相连接方式研究

针对石家庄西变电所施工改造中,2008年3月发生的变电所母线和变压器换相连接问题,利用理论和测试的方法进行了分析,找出了原因。同时结合运行和施工中其他2例换相故障,提出了几项切实可行的措施。     

激光堆焊工艺在修造领域的应用现状及发展趋势

本文详细阐述了激光堆焊工艺在工业修造领域的应用现状及发展趋势,介绍了激光束的能源、输送和聚焦系统、堆焊材料及激光设备。重点说明了其在修造领域的应用工艺。     

Total cost analysis: An alternative to benefit-cost analysis in evaluating transportation alternatives

This paper explains the theory in support of total cost analysis (TCA) to compare transportation system alternatives. The full costs of each alternative are first aggregated, including travel time costs and monetizable environmental and social costs. Many costs which are considered on the benefits side of the equation in benefit-cost analysis (BCA) as "cost savings" are brought over to the costs side. Total cost differences among alternatives are then traded off against their estimated non-monetized benefits or impacts, just as a consumer trades off product quality against cost before deciding which product he or she will buy. One advantage of TCA over traditional BCA is that the concept of "total cost" is more easily understood by the public and by political decision-makers than BCA concepts such as "net present worth", "benefit-cost ratio" and "internal rate of return". A second advantage is that there is no suggestion that all "benefits" have been considered; decision-makers are free to use their own value judgements to trade off total cost against non-monetizable social, environmental and economic impacts, just as they trade off quality and convenience against cost when purchasing goods and services in their roles as consumers. The TCA approach is demonstrated in this paper through a case study of two systemwide alternatives for the Baltimore, MD urban area.     

A simple formulation for predicting the ultimate strength of ships

The aim of this study is to derive a simple analytical formula for predicting the ultimate collapse strength of a single- and double-hull ship under a vertical bending moment, and also to characterize the accuracy and applicability for earlier approximate formulations. It is known that a ship hull will reach the overall collapse state if both collapse of the compression flange and yielding of the tension flange occur. Side shells in the vicinity of the compression and the tension flanges will often fail also, but the material around the final neutral axis will remain in the elastic state. Based on this observation, a credible distribution of longitudinal stresses around the hull section at the overall collapse state is assumed, and an explicit analytical equation for calculating the hull ultimate strength is obtained. A comparison between the derived formula and existing expressions is made for largescale box girder models, a one-third-scale frigate hull model, and full-scale ship hulls.List of symbols A _B total sectional area of outer bottom - A _B total sectional area of inner bottom - A _D total sectional area of deck - A _S half-sectional area of all sides (including longitudinal bulkheads and inner sides) - a _s sectional area of a longitudinal stiffener with effective plating - b breadth of plate between longitudinal stiffeners - D hull depth - D _B height of double bottom - E Young's modulus - g neutral axis position above the base line in the sagging condition or below the deck in the hogging condition - H depth of hull section in linear elastic state - I _s moment of inertia of a longitudinal stiffener with effective plating - l length of a longitudinal stiffener between transverse beams - M _E elastic bending moment - M _p fully plastic bending moment of hull section - M _u ultimate bending moment capacity of hull section - M _uh ,M _us ultimate bending moment in hogging or sagging conditions - r radius of gyration of a longitudinal stiffener with effective plating [=(I _s /a _s )^1/2] - t plate thickness - Z elastic section modulus at the compression flange - Z _B ,Z _D elastic section modulus at bottom or deck - slenderness ratio of plate between stiffeners [= (b/t)(_y/E)^1/2] - slenderness ratio of a longitudinal stiffener with effective plating [=(l/r)(_y/E)^1/2] - _y yield strength of the material - _yB , _yB , _yD yield strength of outer bottom, inner bottom - _yS deck, or side - _u ultimate buckling strength of the compression flange - _uB , _uB , _uD ultimate buckling strength of outer bottom - _uS inner bottom, deck, or side