地铁列车逻辑控制电路安全服役技术应用研究

为克服传统地铁列车继电器控制电路高故障率和无记录功能等诸多缺陷,提出了基于新型二乘二取二技术的无触点逻辑控制方案.完成了系统架构设计包括热备冗余、网络通信、故障诊断、日志分析等功能.针对既有地铁列车进行了控制电路技术方案设计和施工改造,首先在分析原有控制回路原理的基础上,完成无触点逻辑控制单元替代继电器点位设计;然后综...     

钢桥面铺装环氧沥青粘结层施工质量控制

环氧沥青粘结层的施工质量直接影响到环氧沥青混凝土铺装层施工效果的好坏。文中结合后海大桥钢桥面铺装工程实际,对环氧沥青粘结层材料性质及粘结层的施工进行了研究,提出了环氧沥青粘结层施工中应注意的问题。     

Virtual prototype simulation on underwater hydraulic impingement shovel

The virtual prototype technology is applied to the design of the hydraulic impingement shovel, which is to increase the reliability of the design. The work principle of hydraulic impingement shovel is expatiated, and its dynamic equations are established. The 3D model of virtual prototype is built by PRO/E. Then the couple between the mechanical body of prototype and the hydraulic system is completed by virtue of ADAMS. Finally, the simulation is made on the virtual prototype. The simulation results show that the design of underwater hydraulic impingement shovel is rational. The virtual prototype technology could lay sound foundation of successful manufacturing of physical prototype for the first time and offer highly effective and feasible means for the design and production of underwater equipments.     

Experimental study on the width of the turbulent area around bridge pier

At present, the method of calculating the turbulent flow width around the bridge pier is not given in the "Standard for Inland River Navigation" (GB50139-2004) in China, and the bridge designer usually increases the bridge span in order to ensure the navigation safety, which increases both of the structural design difficulty and the project investments. Therefore, it is extremely essential to give a research on the turbulent flow width around the bridge pier. Through the experiments of the fixed bed and the mobile bed, the factors influencing the turbulent flow width around the bridge pier have been analyzed, such as the approaching flow speed, the water depth, the angles between the bridge pier and the flow direction, the sizes of bridge pier, the shapes of the bridge pier, and the scouring around the bridge pier, etc. Through applying the dimension analytic method to the measured data, the formula of calculating the turbulent flow width around the bridge pier is then inferred.     

Using a SVM to evaluate damage to vibration isolators in an elastic raft system

Predicting damage to vibration isolators in a raft experiencing heavy shock loadings from explosions is an important task when designing a raft system. It is also vital to be able to research the vulnerability of heavily shocked floating rafts unreliable, especially when the allowable values The conventional approach to prediction has been or ultimate values of vibration isolators of supposedly uniform standard in a raft actually have differing and uncertain values due to defective workmanship. A new model for predicting damage to vibration isolators in a shocked floating raft system is presented in this paper. It is based on a support vector machine（SVM）, which uses Artificial Intelligence to characterize complicated nonlinear mapping between the impacting environment and damage to the vibration isolators. The effectiveness of the new method for predicting damage was illustrated by numerical simulations, and shown to be effective when relevant parameters of the model were chosen reasonably. The effect determining parameters, including kernel function and penalty factors, has on prediction results is also discussed. It can be concluded that the SVM will probably become a valid tool to study damage or vulnerability in a shocked raft system.     

A second order volume of fluid （VOF） scheme for numerical simulation of 2-D breaking waves

Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid (VOF) methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method (BIM) have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the commercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme.     

A two-phase model for dry port location with an application to the port of Dalian in China

This paper provides guidance for an optimal and reasonable dry port layout for the port of Dalian in China. We present a two-phase framework on the location of dry ports, which solves the selection of candidate inland cities and optimal dry port location choice, respectively. Fuzzy C-Means Clustering is applied to select alternative cities in the vast hinterland of the seaport of Dalian, with a view to identify evaluation factors that affect the location selection decision. A cost-minimisation linear programming solution is proposed, with the aid of a genetic algorithm, to choose the optimal location as well as capacity level among the candidate inland cities.     

集中排烟隧道近火源顶板热参数理论预测

由于集中排烟模式能较好地控制上下游烟气的扩散范围,故被广泛应用于长大隧道设计中。文章针对小尺度火灾,建立了集中排烟隧道火源热烟羽受限发展理论模型,与已有火灾实验结果进行对比,完成了理论模型的验证,预测了顶板下方最高烟气温升、偏移距离等热参数。预测结果表明:火灾强度一定时,烟气最大温升随等效风速增加而急剧下降,且火灾强度对烟气温升的影响也较为显著;当等效风速超过1.5 m/s时,最大温升变化趋缓直至恒定;等效风速较小时,羽流未发生明显偏移,随着等效风速进一步增大,偏移距离明显增大,其变化速率随火灾强度的增大而减小。经回归整理得到了顶板下方烟气最大温升、偏移距离的无量纲准则关联式。     

基于学科竞赛的自动化设计类课程群建设

高校应用型人才培养是当前高等教育的组成形式之一,该文以自动化专业为例,通过一系列的具体课程教学实施逐步探索依托学科竞赛的创新人才培养模式,以学科竞赛为辅助,教学改革为主体,根据自动化专业人才培养的需求,从内容、结构和逻辑关系上分析不同课程间的关联性,优化设计类课程的课程体系,整合教学内容和教学方法,创新教学模式,从而不...     

"盖挖法"在近接既有建筑物的大跨隧道施工中的应用

针对大跨隧道洞口段埋深浅、邻近既有建筑物的工程特点,在国内外研究成果的基础上,对近接施工影响程度及范围进行了分析,并对各施工方案进行详细比选.结果表明,"盖挖法"不但能克服传统方法带来的各种不利因素,而且能够确保隧道的施工进度和既有建筑物的安全,同时可减少对洞口生态环境的破坏,是最佳的近接施工方案.