Methodology for the accuracy improvement of FEM beam type T-junctions of buses and coaches structures

The analysis of structures with finite elements methods (FEM) represents a widely spread technique. For large tubular structures similar to the buses and coaches upper structures, beam type elements are utilized due to the fact that these elements provide satisfactory results at relatively reduced computational performances. However the beam type elements have a main disadvantage determined by the fact that the modeled joints have an infinite rigid behavior. This shortcoming determines a stiffer behavior of the modeled structures which translates into an error source for the structural simulations (up to 45%). To overcome this problem, a simple methodology was conceived and an alternative optimized equivalent beam model obtained. The methodology studies the behavioral characteristics of beam modeled T-junctions determining their limitations and comparing them to equivalent T-junctions modeled with shell and volume elements. This way an improved Tjunction has been obtained, in which the behavioral error was reduced to less than 5%. Furthermore the FEM obtained results were validated with real T-junctions.     

Location of bus garages

The location of bus garages is a complex issue that has received recent attention in the literature. Given a bus system, the number of bus garages and their locations depend on garage cost, deadheading cost and environmental impacts. An approximate analytical model is used to determine the number of bus garages that minimizes the above costs. The concept of a slowly varying density of bus-route origins (hence deadheads) per unit area is used to model deadheading costs. The increased deadheading caused by breakdowns and accidents is also considered. The garage cost is modeled as a function of the number of buses stored. A closed-form solution is obtained for the optimal density of garages, when the garage cost function is linear. The actual locations of garages and the allocations of buses to the garages are found using a discrete space location-allocation model formulated so as to consider the environmental impact associated with buses deadheading through populated neighborhoods.     

Intermodal and international freight network modeling

The authors describe the development and application of a single, integrated digital representation of a multimodal and transcontinental freight transportation network. The network was constructed to support the simulation of some five million origin to destination freight shipments reported as part of the 1997 United States Commodity Flow Survey. The paper focuses on the routing of the tens of thousands of intermodal freight movements reported in this survey. Routings involve different combinations of truck, rail and water transportation. Geographic information systems (GIS) technology was invaluable in the cost-effective construction and maintenance of this network and in the subsequent validation of mode sequences and route selections. However, computationally efficient routing of intermodal freight shipments was found to be most efficiently accomplished outside the GIS. Selection of appropriate intermodal routes required procedures for linking freight origins and destinations to the transportation network, procedures for modeling intermodal terminal transfers and inter-carrier interlining practices, and a procedure for generating multimodal impedance functions to reflect the relative costs of alternative, survey reported mode sequences.     

船舶燃料的全球化标准——国际海事组织（IMO）新标准要求船只采用更具环保性、更高成本的燃料

更具环保性，成本更高，是国际海事组织新标准要求船舶经营人放弃船舶传统燃料而采用蒸馏燃料的两个结果。此外，全球统一的船舶传统燃料环保标准也是放弃船舶燃料而采用蒸馏燃料的必然结果。     

Spatial fisheries ecology: Recent progress and future prospects

We review recent progresses made in the study of fish distribution and survival over space — i.e., fisheries spatial ecology. This is achieved by first surveying the most common statistical approaches and relative challenges associated with the analysis of fisheries spatial data, loosely grouped in geostatistical and regression approaches. Then we review a selected number of case-studies implementing the discussed techniques. We conclude by proposing new areas of statistical and ecological research to further our understanding of how fish distribute and survive in space. This review serves a dual purpose by emphasizing the scientific importance of studying spatial interactions to better understand the temporal dynamics of fish abundance, and by promoting the development of new analytical and ecological approaches for the analysis of spatial data. Through our survey we cover different statistical techniques, marine ecosystems and life stages. This analytical, geographic and ontogenetic variety is also purposely selected to highlight the importance of comparative and multidisciplinary studies across diverging ecological disciplines, ecosystems and life stages. Besides having a general ecological relevance this review also bears a more applied significance, owing to the increasing need for protecting renewable marine resources along with their primary habitat.     

Devising business strategy for railways

This paper presents a case study which tackles a general problem for railway management, namely the formulation of a strategy to improve business financial performance. This is prefaced, in Section 2, by discussion of general principles - concerning the type of information system required, investigations to be conducted and associated measurement needs. The case study, of Section 3, concerns our investigations of VicRail's total business and its constituents. The task of financial improvement is revealed from an assessment of sectors' current cost-recovery positions and the identification of system joint costs. For freight sectors, future traffic prospects, pricing possibilities and the scope for more efficient operations are then considered, and the implications traced for overall deficit reduction and the development of business strategy. The concluding section draws some general lessons for railway managements.A fuller discussion by the authors of the theoretical framework employed, and particularly of the case study application, is contained in a complimentary publication: Improving Railway Financial Performance, published by Gower in January 1985.Transmark is a subsidiary of the British Railways Board, acting as its international consultancy. The authors, who were respectively study director and manager, wish to thank Bernard Warner (an independent consultant), Richard Eccles (of Transmark) and Adrian Balkyn-Rackowe (of British Rail) for their valuable contributions. The study report, titled Rail Cost — Pricing Options, was released by the Minister in April 1981.     

6502站继电器采集故障原因分析

本文通过对6502站继电器采集故障原因进行分析，提出用增加复示继电器、缩短电缆长度或采集电缆单独敷设的方法，减少采集故障发生，确保列控中心识别进路信息采集的正确性。     

Method for obtaining the wheel–rail contact location and its application to the normal problem calculation through ‘CONTACT’

This work presents a robust methodology for calculating inter-penetration areas between railway wheel and rail surfaces, the profiles of which are defined by a series of points. The method allows general three-dimensional displacements of the wheelset to be considered, and its characteristics make it especially suitable for dynamic simulations where the wheel–rail contact is assumed to be flexible. The technique is based on the discretisation of the geometries of the surfaces in contact, considering the wheel as a set of truncated cones and the rail as points. By means of this approach, it is possible to reduce the problem to the calculation of the intersections between cones and lines, the solution for which has a closed-form expression. The method has been used in conjunction with the CONTACT algorithm in order to solve the static normal contact problem when the lateral displacement of the wheelset, its yaw angle and the vertical force applied in the wheelset centroid are prescribed. The results consist of smooth functions when the dependent coordinates are represented as a function of the independent ones, lacking the jump discontinuities that are present when a rigid contact model is adopted. Example results are shown and assessed for the normal contact problem for different lateral and yaw positions of the wheelset on the track.     

城市桥梁改造中的桥头交叉口典型问题及对策

早期桥梁建设中往往对桥头接线缺乏重视,运行至今,存在较多的道路交通问题。文章以福建省将乐县三华大桥桥头交叉口为分析对象,对旧桥改造中面临的一系列道路交通问题进行分析,并结合大桥实际情况,提出了相应的改善措施,供相关工程技术人员参考。     

Net tax incidence for urban public transit subsidies in New Zealand

This paper examines the impact of policy changes in the funding of New Zealand public transit modes.These changes, introduced in 1983, are evaluated in terms of the net incidence of public transit subsidy assistance, taking into account its source of funding and the income class of those commuters benefiting from the subsidy. The general conclusion is that the net incidence of subsidy assistance remains progressive (i.e., a transfer from high to low income commuters) following the introduction of shared funding on the predominant public transit modes (rail and bus), sourced from income tax (central government) and property tax (regional/local government). However, because of the predominance of medium to high income commuters on rail vis-a-vis bus and the traditional source of funding on these modes in terms of income tax (a progressive tax source) and property tax (a regressive tax source), the degree of progressivity previously associated with public transit subsidies has now substantially reduced.The analysis and opinions expressed in this paper are the responsibility of the author alone and do not purport to represent the views of the Ministry of Transport.