Optimal Design of Running Gears Part I. Theory

A survey is given of the theory developed by author during recent years for an optimal design of railway vehicle running gears. It enables the designer to build a running gear which at the same time has good curving properties and is stable up to a high vehicle speed.     

Testing and Analysis Techniques for Safety Assessment of Rail Vehicles: The State-of-the-Art

The methods currently being used in North America, Britain and Europe for the safety assessment of rail vehicles are discussed. There is considerable disparity between the methods that have been developed in the different countries. These differences, and the possible reasons for them, are discussed in the paper. Finally, conclusions are drawn and some recommendations are made for the future direction of safety assessment methods.     

The growth of fleets registered in the newly-emerging maritime countries and maritime crises

This paper suggests the existence of a feedback relationship between the dynamic entrance of less-developed countries in shipping and the prolongation and deepening of maritime crises. The duration and extent of the transitional period of crisis depends also on the specific terms of the 'succession' procedure between fleets with different cost levels. During the last major maritime crisis, nations at a less advanced stage of development entered the maritime industry producing a service that had become—more or less—'standardized', following the Vernon product cycle more than all other cycles. The distribution of world tonnage among the different groups of countries underwent major changes as the effects of the economic crisis after 1973, which coincided with developments in the supply of tonnage, created favourable conditions for the rise of the lower cost fleets of developing countries, in a feedback relationship. The restoration of freight levels during the late 80s and early 90s, which was accompanied by a certain stabilization in the various groups of countries' shares in the world fleet, corroborates from the opposite direction the hypothesis of a close interrelationship between maritime crisis and changes in the international hierarchy in shipping.     

Risk and investment decisions in non-liner shipping

The investment decisions of non-liner shipping firms based on their behaviour towards risk, stochastic demand for capacity, inelastic supply and foregone profits are discussed. These aspects are formalized in a simple stochastic model, which, together with definitions of two broad categories of risk behaviour, is then used to examine and contrast the investment decisions of the two different strategic groups. The analysis shows that the capacity expansions/investments sought by the risk averter and the risk lover will differ under 'normal' circumstances with the risk averter having significantly less capacity than the risk lover. The risk lover will have higher capacity in a volatile market than in a stable market situation. During periods of high capital costs, the investment decisions of the two risk groups tend to be indistinguishable.     

Trucking industry demand for urban shared use freight terminals

The issue of shared use urban freight facilities first received attention during the 1970s when it was observed that, while inter-urban freight movements were becoming increasingly efficient, there were significant diseconomies in the movement of freight via truck within urban areas. Early research suggested that shared urban freight facilities should be constructed so that trucking companies could consolidate smaller shipments into larger ones. In the past few years, the concept of Urban Ports has gained increasing attention, not just for carriers who need to load and unload freight, but to provide a place near the urban center for truckers to wait out peak traffic periods. In this paper, using recently developed survey data, we examine trucking company interest in such facilities by examining the results of an ordered probit demand model.     

Major sources of hydrocarbon emissions in a premixed charge compression ignition engine

Although premixed charge compression ignition (PCCI) combustion engines are praised for potentially high efficiency and clean exhaust, experimental engines built to date emit more hydrocarbons (HCs) and carbon monoxide (CO) than the conventional machines. These compounds are not only strictly controlled components of the exhaust gas of road vehicles but are also an energy loss indicator. The prime objective of this study was to investigate the major sources of the HCs formed in the combustion chamber of an experimental PCCI engine in order to suggest some effective technologies for HC reduction. In this study, to explore the dominant sources of HC emissions in both operation modes, a single cylinder engine was prepared such that it could operate using either conventional diesel combustion or PCCI combustion. Specifically, the contributions of the top-ring crevice volume in the combustion chamber and the bulk quenching of the lean mixture were investigated. To understand the influence of the shape and magnitude of the crevice on HC emissions, the engine was operated with 12 specially prepared pistons with different top-ring crevices installed one after another. The engine emitted proportionally more HCs as the depth of the crevice increased as long as the width remained narrower than the prevailing quench distance. The top-ring-crevice-originated exhaust HCs comprised approximately 31% of the total HC emissions in the baseline condition. In a series of tests to estimate the effects of bulk quench on exhaust HC emissions, intake air was heated from 300K to 400K in steps of 25K. With the intake air heated, HC and CO emissions decreased with a gradually diminishing rate to zero at 375K. In conclusion, the most dominant sources of HC emissions in PCCI engines were the crevice volumes in the combustion chamber and the bulk quenching of the lean mixtures. The key methods for reducing HC emissions in PCCI engines are minimizing crevice volume in the combustion chamber and maximizing intake air temperature allowed based on the permissible NOx level.     

High-strain-rate fracture of adhesively bonded composite joints in DCB and TDCB specimens

Double-cantilever beam (DCB) and tapered double-cantilever beam (TDCB) specimens are the test configurations most commonly used to measure the fracture toughness of composites and adhesive joints. Strain rates of 1 to 18.47 m/s were applied to the test specimens via high-speed hydraulic test equipment. Because the fracture occurs through the adhesively bonded joints and the cracks grow rapidly, the crack length and beam displacement were recorded by a high-speed camera. An energy range from 0 to 10 J was often observed in the high-strain-rate fracture experiments for nonlinear plastic behavior of the dynamically loaded adhesively bonded DCB and TDCB specimens. The range of energy release rates (fracture energy) for TDCB specimen was 2 to 3 times higher than that of a DCB specimen for all high strain rates. The fracture energy of automotive adhesive joints can be estimated using the experimental results in this study for the fracture toughness (G_IC) under high rates of loading. The crack grows as the applied fracture energy exceeds the value of the critical energy release rate (G_IC) at the crack tip. The energy release rate was calculated using the fracture mechanics formula. The key fracture mechanics parameter, the fracture energy GIC, was ascertained as a function of the test rate and can be used to assess and model the overall joint performance.     

Fuel consumption of fuel cell hybrid vehicles considering battery SOC differences

Fuel cell hybrid vehicles (FCHVs) have become one of the most promising candidates for future transportation due to current energy supply problem and environmental problem. Fuel economy is an important factor in FCHVs. In order to properly evaluate the fuel economy of an FCHV, the initial battery state of charge (SOC) and the final battery SOC have to be identical so that the effect of the battery energy usage on the fuel economy is neglected. In the simulation or in the real driving, however, the final battery SOC is usually different from the initial battery SOC, and the final battery SOC often depends on the power management strategy. To consider the difference between the two battery SOC values, the concept of equivalent fuel consumption is presented by two methods. One is based on the relationship between delta SOC and delta fuel consumption, and the other is based on the optimal control theory. Two rule-based power management strategies for an FCHV are presented, and for each strategy, the fuel economy is evaluated based on the two methods. The characteristics of the two methods are discussed and compared, and the superior one is selected based on the comparison.     

Automatic control of clutches and simulations for parallel hybrid vehicles

This paper is a continuation of a previous paper titled ??Modeling and Model Predictive Control for Hybrid Vehicle?? published on IJAT/2011 describing a mathematical model and design for a model predictive controller for tracking speeds and simulations. The present paper further describes a fuzzy logic controller for the smooth and quick engagement of an automatic clutch. The described controller uses both fuzzy logic and slip control algorithms to enable automatic clutch engagement. Clutch engagement and comprehensive simulations for the hybrid vehicle are conducted in MATLAB R2009s. The research described herein offers theoretical solutions for how to better control clutch slip and engagement within realistic parameters used for hybrid vehicles. Algorithms and operations of this fuzzy logic controller can be implemented in electronic control units for automatic clutch engagements and gear-shifting processes.