Application of plastic framing requirements for polar ships

A new International Association of Classification Societies (ICAS) standard for Polar Ship design, in the form of a Unified Requirement is being developed by an international committee with representatives from many classification societies and with the active participation of many polar nations. The framing structural requirements have been developed by a combination of analysis of existing rules and ships, finite element analysis and analytical solutions of plastic collapse mechanisms. This paper describes the use of the rule formulae in designs. The formulae contain interactions between shear and bending and give the designer options and flexibility in satisfying the strength requirements. Effective design requires knowledge of the effects, and the possible approaches to reach a satisfactory design.     

Average duration and performance of actuated signal phases

This paper describes an approach for evaluating alternative traffic detection designs for a signalized intersection. The models described in this paper can be used to determine the average phase duration and frequency of phase “max-out” as a function of the detector loop layout, detector unit timing, traffic demand, and approach speed. Layout and timing are described by the number of detectors on each approach served by the phase, detector location on each approach, detector length, and detector unit and controller time settings. The authors have used the concept of maximum allowable headway (MAH) to combine the many possible combinations of layout and timing variables into one representative quantity, which greatly simplifies the modelling process. The performance models were used to examine the sensitivity of intersection performance to a range of design values. In general, both phase duration and cycle length increase with higher demands or larger MAHs. Multiloop (i.e. two or more detection zones per lane) detector designs typically have larger MAHs than designs with one detector loop per lane. Phase duration and cycle length also increase for very low demand levels. In terms of performance, the maximum green duration was found to have a contrary effect at higher flow conditions. Larger maximum greens were found to reduce delays to the phase in service by reducing the probability of max-out but they increased delays to drivers waiting for service.     

Pollution history of a tropical estuary revealed by combined hydrodynamic modelling and sediment geochemistry

Hydrodynamic modelling of water movement in Hunts Bay, a protected part of Kingston Harbour, Jamaica, shows that depth averaged tidal flows are very low. In the northeast corner of Hunts Bay, water is essentially stagnant. Even under high flow conditions, much of the Bay bottom water is ‘bypassed' by buoyant, lower salinity surface flows. The muddy sediments of Hunts Bay reflect these sluggish to stagnant conditions; sediment cores from the northeast corner of the Bay contain progressively higher amounts of organic matter in their upper parts (last 15–20 years sedimentation). Combined C/N ratios and stable carbon isotope compositions of this organic matter imply a sewage origin. Both lead and chromium metal concentrations and enrichment factors relative to average crustal shales show geographically related patterns that reflect hydrodynamic circulation predicted by modelling. In particular, metal concentrations and enrichment factors are highest at the northern end of the bay, especially in the northeast corner. Modelling confirms that stagnant conditions would occur in the northeast part of the bay even without the presence of a major causeway. The causeway may contribute to low flow conditions, but is not the principal cause of organic contamination, which is simply an excessive input of sewage.     

Appraisal of investments in European nodal centres for goods – freight villages: A comparative analysis

The paper presents and analyses appraisal methods used for the assessment of potential investments in Nodal Centers for Goods (also called Freight Villages), which constitute an essential element of the Trans-European Network for Intermodal Transport. A methodological procedure is applied to identify the underlying factors that influence the choice of an appraisal method, without assessing or comparing the appraisal methods themselves. Following this procedure, issues addressed by the methods are grouped into three broad dimensions and with the use of non-parametric statistical tests, existing relationships are identified between nodal centres' characteristics, the appraisal methods, as well as the actors involved in the decision process. On applying the above procedure to European Nodal Centres for goods, it is found that the choice of appraisal method and the decision criteria for the investment are linked primarily to the nodal centre's size, catchment area, and the support or absence of political approval for the investment. The results of the analysis can be particularly useful at the policy making level, serving as non-formal "qualitative guidelines" to identify the appraisal method to be applied, as well as the options and impacts to be considered. This revised version was published online in June 2006 with corrections to the Cover Date.     

Market segmentation as a mechanism in allowing for variability of traveller behaviour

A major problem with aggregate transport planning models is the accounting of variability in traveller behaviour when the basic unit of analysis is the geographical traffic zone. In an attempt to allow for this variance, recent attention has been given to the role of socio-economic (user and household) characteristics in systematically identifying a homogeneous grouping of travellers with respect to the issue under study rather than restricting the grouping definition according to physical geographical criteria alone. This homogeneous grouping criterion combined eventually with a necessity to represent travel demand in a spatial context, can assist in improving our ability to explain real travel patterns by the development of an improved aggregation condition. The emphasis is on modelling homogeneous groups of travellers separately, and then relating the individual sets of results to each other to obtain an aggregate prediction of behaviour via a knowledge of the representativeness of each group contained in the total sample. This paper presents a technique to identify the relative homogeneity of travellers in accordance with a specified criterion, and illustrates its use with individual household data for the Sydney Metropolitan Area. The paper concludes with a discussion of the advantages of segmentation in operational transport planning, in particular with reference to the aggregation of disaggregate behavioural travel choice models, or movement from a micro-model of individual choice behaviour to an aggregate model of travel demanu.     

An analysis of trip length and land use patterns in the Greater Athens Area

The research described in this paper is an attempt to quantify the impact of a certain distribution of land uses upon trip characteristics — notably trip lengths. The idea is to relate trip lengths classified by mode and purpose to the distance of one trip end from the conurbation centre. The latter is defined as the point which represents a reasonable estimate of the place where the economic, administrative, and cultural life of the urban area is centered.By relating trip lengths to the distance of one trip end from the centre, one could obtain a relation which in effect would be a quantitative expression of the relation between transport and land use. The first application of this idea was in London using the 1966 journey to work data, and it gave quite satisfactory results.The area examined in this research is the Greater Athens Area. The method of analysis is similar to that followed in London so the results of the two studies can be compared. Only work trips are considered for four modes: car, bus, train and all modes (total). It is found that in the case of Athens too, when distance of the workplace from the centre is considered, trip lengths change in smoothly varying ways and a series of mathematical curves can be fitted to the data with an acceptable degree of accuracy. These curves are of the Gamma family having a constant spread factor and varying scale factors for each mode considered. When the distance of the residence end of the trip from the centre is considered, the trip length distributions are not very smooth, a clear mathematical curve cannot be fitted, but again a considerable degree of order can be detected. In addition to the above results a discussion is given on their meaning and the possibilities for future research. In fact the results so far are considered to be the first stage of a more extended research programme which will eventually connect trip length distributions to income and other economic or social parameters in an urban area.The author wishes to express his thanks and appreciation for the comments and constructive criticism made on the various drafts of this paper by M.J.M.     

Do new sources of traffic data make the application of Chaos Theory to traffic management a realistic possibility?

Current signal systems for managing road traffic in many urban areas around the world lack a coordinated approach to detecting the spatial and temporal evolution of congestion across control regions within city networks. This severely inhibits these systems’ ability to detect reliably, on a strategic level, the onset of congestion and implement effective preventative action. As traffic is a time-dependent and non-linear system, Chaos Theory is a prime candidate for application to Urban Traffic Control (UTC) to improve congestion and pollution management. Previous applications have been restricted to relatively uncomplicated motorway and inter-urban networks, arguably where the associated problems of congestion and vehicle emissions are less severe, due to a general unavailability of high-resolution temporal and spatial data that preserve the variability in short-term traffic patterns required for Chaos Theory to work to its full potential. This paper argues that this restriction can now be overcome due to the emergence of new sources of high-resolution data and large data storage capabilities. Consequently, this opens up the real possibility for a new generation of UTC systems that are better able to detect the dynamic states of traffic and therefore more effectively prevent the onset of traffic congestion in urban areas worldwide.     

Forced Steering of Rail Vehicles: Stability and Curving Mechanics

A forced steering rail vehicle employs linkages between.the carbody and wheelsets to force a more radial wheelset alignment. It is shown that the curve negotiation capability of forced steering trucks is significantly improved over conventional and self steering radial trucks. Parametric curves are presented showing angle-of-attack and lateral flange force as a function of steering gain parameters and truck bending stiffness. It is also shown that the forced steering concept can produce kinematic instability and severely reduced critical speeds for low conicities and creep coefficients. Analytic expressions are derived that illustrate how these kinematic instabilities can be avoided.