Cost benefit analysis of urban minibus operations

Earlier work by the Transport Studies Group of the Polytechnic of Central London on minibus development in Britain for the Transport and Road Research Laboratory provided a financial analysis of intensive urban minibus operation. This is taken as the basis for the application of cost-benefit analysis. Unit operating cost savings and passenger benefits are taken into account, using typical demand elasticities derived from earlier work. Particular attention is paid to the problem of evaluating passenger benefits for which waiting time at the roadside is not necessarily an adequate proxy. A direct survey of passenger waiting times indicates that these do not necessarily decrease when a higher-frequency minibus service replaces a conventional bus service but the improved convenience produces an increase in ridership which may be assessed in terms of a demand curve shift to estimate benefits obtained.     

Merchant fleet development by legislation: lessons from West and Central Africa

In the late 1960s and early 1970s, several developing maritime nations began to invoke their 'legitimate right' to carry, in their own vessels, cargo generated by their own import and export trades as one way to reverse their underdevelopment and dependency on traditional maritime nations. Consequently, they embarked on the establishment and development of national merchant fleets by means of cargo reservation legislation and flag discrimination practices. West and Central African states have pursued a vigorous policy of merchant fleet development for over two decades. This study examines some of the cargo reservation policies and flag discrimination practices in West and Central Africa and concludes that these two measures alone are insufficient to build up a significant merchant marine. Merchant fleet development depends equally on the resolution of problems such as shortage of ship finance or capital, disruptive bureaucratic politics among the state agencies concerned with shipping, low volume of trade, and contradictory and ambivalent fiscal and macroeconomic policies in these countries that impede the development of the maritime sector.     

A schedule-based time-dependent trip assignment model for transit networks

A schedule-based time-dependent trip assignment model for transit networks is presented. First the transit network model is formulated using the schedule-based approach, in which the vehicles are assumed to arrive punctually in accordance with a scheduled time-table. Based on a previously developed time-dependent shortest path algorithm, an all-or-nothing network loading procedure is employed to assign the passenger trips onto the network. Both the passenger demand and scheduled time-table are time-varying. This provides a versatile tool for the evaluation of the performance of transit networks subject to peak period loading. A case study using the Mass Transit Railway System in Hong Kong is given to illustrate the potential applications of the model.     

CORADIA LIREX——创新的轻型区间快速动车组家族

ALSTOM LHB 公司在LIREX样车的基础上于2001年开发了CORADIA LIREX动车组家族.该动车组整列为低地板、有创新的传动设计以及符合旅客需要的车内布置及设施,为区间铁路运输列车提供了新的标准.模快化结构的车辆是按各种不同传动系统设计的,除牵引电动机外,所有传动部件均安装在车顶上.文章介绍该动车组的基本设计、电气部分、机械部分以及主要技术参数.     

A methodology for planning bus service

A methodology to assist transportation planners in designing bus services is developed. The methodology is most relevant for use in locations where bus service of the type being studied does not currently exist and therefore no information is available on past choice behavior, or in instances when transferability of travel models estimated in another location is difficult. The methodology assesses the sensitivity of bus service characteristics upon intended bus usage using survey data collected in Orange County, California, by the Orange County Transit District (OCTD). The methodology is based on a nonparametric statistical test developed by Kolmogorov and Smirnov.Scenarios describing hypothetical operations of bus service are presented to survey respondents who indicate their intended levels of bus usage under each situation. Significant differences between the response distributions associated with pairs of scenarios are identified and potential ridership levels, as bus operations become more favorable, are assessed. Various user segments are then identified on the basis of their levels of intended bus usage and the corresponding marketing implications associated with each segment are discussed.     

The Influence of Structural Flexibilities on the Straight-running Stability of Motorcycles

A new tyre model for studies of motorcycle lateral dynamics, and three new motorcycle models, each incorporating a different form of structural compliance, are developed. The tyre model is based on “taut string” ideas, and includes consideration of tread width and longitudinal tread rubber distortion and tread mass effects, and normal load variation. Parameter values appropriate to a typical motorcycle tyre are employed. The motorcycle models are for small lateral perturbations from straight running at constant speed, and include (a) lateral compliance of the front wheel in the front forks, (b) torsional compliance of the front forks, and (c) torsional compliance in the rear frame at the steering head about an axis perpendicular to the steering axis.

Results in the form of eigenvalues, indicating modal damping properties and natural frequencies are presented for each model. The properties of four large production machines for a range of forward speeds, and the practicable range of stiffnesses are calculated, and the implications are discussed.

It is concluded that typical levels of structural compliance in models (a) and (c) contribute significantly to the steering behaviour properties of large motorcycles, and their observed behaviour can be understood better in terms of the new results than of those existing previously. Some conclusions relating to optimal structural stiffness properties are also drawn.     

Wave data assimilation with the Kalman filter

A new data assimilation method for ocean waves is presented, based on an efficient low-rank approximation to the Kalman filter. Both the extended Kalman filter and a truncated second-order filter are implemented. In order to explicitly estimate past wind corrections based on current wave measurements, the filter is extended to a fixed-lag Kalman smoother for the wind fields. The filter is tested in a number of synthetic experiments with simple geometries. Propagation experiments with errors in the boundary condition showed that the KF was able to accurately propagate forecast errors, resulting in spatially varying error correlations, which would be impossible to model with time-independent assimilation methods like OI. An explicit comparison with an OI assimilation scheme showed that the KF also is superior in estimating the sea state at some distance from the observations. In experiments with errors in the driving wind, the modeled error estimates were also in agreement with the actual forecast errors. The bias in the state estimate, which is introduced through the nonlinear dependence of the waves on the driving wind field, was largely removed by the second-order filter, even without actually assimilating data. Assimilation of wave observations resulted in an improved wave analysis and in correction of past wind fields. The accuracy of this wind correction depends strongly on the actual place and time of wave generation, which is correctly modeled by the error estimate supplied by the Kalman filter. In summary, the KF approach is shown to be a reliable assimilation scheme in these simple experiments, and has the advantage over other assimilation methods that it supplies explicit dynamical error estimates.     

The Rolling Motions of Road Vehicles

This paper examines the rolling motions of vehicles with pneumatic tires. From a simplified analysis two sources of instability are identified-one related to center of gravity position and the other to tire and suspension characteristics. When a specimen vehicle is considered, it is shown that current semi-trailer design can display instability from either source.     

展望中国Telematics业务发展

中国汽车生产商们首先必须了解,哪些是消费者愿意花钱购买的Telematics服务,一味地模仿西方市场,是不够的。     

Approach to assess a fast welding simulation in an industrial environment — Application for an automotive welded part

Fusion welding processes are widely used for joining metal structures, such as pipes, ships, and cars. In general, these joining processes offer a very good compromise between reliability, safety, cost and maintenance which are important issues in the current economical context. The negative heat effects of welding, i.e. distortions and residual stresses of the welded parts, are well known and many researches in this field have already been done in the last decades in order to minimize them. On the experimental side, many sophisticated procedures have become state of the art to deal with this problem. On the computational side, the improvement of the simulation algorithms and the computing power enables the simulations of many physical phenomena occurring during the welding process. The implementation of welding simulation techniques is nevertheless not an easy task and often associated with expert knowledge which hinders their global application in an industrial environment. This paper is focused on the industrial requirements of a welding simulation software with special respect to the needs of the automotive industry. The necessary information to run a welding simulation and the expectations of a weld specialist without deep knowledge in numerical methods are investigated. These expectations are tested on an automotive welded assembly with a commercially available welding simulation software designed especially for the needs of the automotive industry. A welding experiment is done and the measured temperature distributions and distortions serve as reference to validate the simulation results. The result quality of the simulations of temperature fields and distortions is in best agreement with experimental data. The workflow is well adapted for the considered industrial requirements and the time-tosolution as well as the computational costs are acceptable, whereas the efficient calibration of the heat input model is still a point which will be further investigated in current and future research works.