Use of an activity-based diary to collect household travel data

The paper describes the results of a pilot survey that used a one-day activity diary to collect origin-destination data, as opposed to a travel-based diary. The design of the diary is discussed, together with a comparison to a more conventional travel diary. The paper examines the extent to which the activity diary appears to have been capable of collecting good travel data that is at least comparable to travel diary efforts. In addition, a substantial portion of the paper is concerned with a comparison of the retrieval methods for the diaries. Two alternative methods were pilot-tested, one being the use of telephone retrieval and the other being mailback retrieval. Although the pilot test used small samples, the evidence appears to be strong that mailback is preferable to telephone retrieval, while telephone retrieval did not seem capable of providing some of the benefits often ascribed to it.     

Waterway traffic analysis of the Chicago River and lock

The vessel-carrying capacity of the Chicago River, Illinois, is restricted by a lock. separating the river from Lake Michigan. Currently, vessels passing through the lock experience long delays during summer months. An investigation and analysis of this system determined that although the system is now generally operating below capacity, the peak periods during summer weekends do approach capacity, and the situation is likely to deteriorate in the future. In addition, the river and lock have safety and traffic conflict problems that need attention. Recommendations to mitigate these problems are described.     

Performance Potential and Power Consumption of Slow-Active Suspension Systems with Preview

Two possible layouts of a slow-active suspension model are analysed. Optimal control laws for different actuator bandwidths and various amounts of road preview are generated, and estimates of power consumption are made. Higher bandwidth systems (10Hz) require less preview to obtain a given level of performance than those with a lower bandwidth (3Hz) but use more energy in doing so. Similar performance is available from the two systems considered, although the second uses considerably less energy to obtain that performance.     

An approach to estimation of near-surface turbulence and CO2 transfer velocity from remote sensing data

The air–sea CO₂ exchange is primarily determined by the boundary-layer processes in the near-surface layer of the ocean since it is a water-side limited gas. As a consequence, the interfacial component of the CO₂ transfer velocity can be linked to parameters of turbulence in the near-surface layer of the ocean. The development of remote sensing techniques provides a possibility to quantify the dissipation of the turbulent kinetic energy in the near-surface layer of the ocean and the air–sea CO₂ transfer velocity on a global scale. In this work, the dissipation rate of the turbulent kinetic energy in the near-surface layer of the ocean and its patchiness has been linked to the air–sea CO₂ transfer velocity with a boundary-layer type model. Field observations of upper ocean turbulence, laboratory studies, and the direct CO₂ flux measurements are used to validate the model. The model is then forced with the TOPEX POSEIDON wind speed and significant wave height to demonstrate its applicability for estimating the distribution of the near-surface turbulence dissipation rate and gas transfer velocity for an extended (decadal) time period. A future version of this remote sensing algorithm will incorporate directional wind/wave data being available from QUIKSCAT, a now-cast wave model, and satellite heat fluxes. The inclusion of microwave imagery from the Special Sensor Microwave Imager (SSM/I) and the Synthetic Aperture Radar (SAR) will provide additional information on the fractional whitecap coverage and sea surface turbulence patchiness.     

Suboptimal Control Design of Active and Passive Suspensions Based on a Full Car Model

An optimal control design method is introduced and then applied to the optimum design of active and passive suspension systems. A basic three-dimensional 7-DOF car riding model subjected to four correlated random road inputs is considered. The design method is basically developed to allow arbitrary choice of sensors for various car state variables to be used for feedback control of each suspension unit. Previous studies show that full-state control laws and even some limited-state control laws often include feedback gains which are almost zero. Some other gains, although not zero, don't play an important role in improving the system performance measures. With the method proposed in this work, every suspension unit can have its own feedback measurements and the criterion function can be related to all state and control variables. Thus a large number of active and semi-active suspension systems with full- or limited-state control laws based on different measurement combination can be suggested, studied, and compared with each other. Instead of comparing these optimized active and semi-active suspension systems with a basic, passive suspension, the passive system itself is optimized with the same criterion. Simulations in the time domain and frequency analyses are performed, and comparisons are made among the systems in terms of r.m.s. car response measures and ISO riding comfort criterion.     

基于车激动力响应互相关指标的桥梁基础冲刷诊断方法

针对当前桥梁基础冲刷诊断和检测方法过程复杂、成本高且受环境影响大等问题，提出一种基于车激动力响应互相关指标的桥梁基础冲刷诊断方法。该方法通过桥墩和桥跨不同测点的纵向加速度响应自由衰减段信号的互相关分析，建立基础冲刷诊断指标体系，实现冲刷定位和均匀性诊断。首先，依据互相关函数幅值向量置信度判据指标进行基础冲刷初判；然后，通过响应互相关函数幅值向量因子变化率向量进行冲刷定位，再根据横桥向互相关函数幅值变化率向量诊断冲刷均匀性；并通过统计评估方法提高诊断精度；最后，结合1座连续梁桥算例进行多种冲刷工况的数值仿真分析，对所提方法的有效性和适用性进行验证。结果表明：该方法能够很好地实现基础冲刷的定位和均匀性诊断，指标具有较高敏感性；同时具有较好的抗噪性能，通过所提出诊断指标体系的综合使用可消除噪声对诊断结果的干扰。该方法具有诊断结果精度高、过程简便易行、无需进行复杂且误差较大的模态识别、允许试验测试参数和条件适量变化等优点，可嵌入常规桥梁荷载试验同步开展，具有很好的工程应用潜力和实用价值。     

The role of Mediterranean short sea shipping in the EU transport chain: The case of Greece

The European Community has provided valuable support to short sea shipping through various programs and legislation. This paper analyses the situation while focusing on the Mediterranean Sea and suggests solutions for addressing the short sea shipping problems in this special region. The biggest challenge for all sides in the comingyears will be the replacement of the existing fleet. The study presented herein gives an insightful and collective picture of the situation, while focusing on the Greek owned short sea vessels.     

Comparative analysis of vehicle brake data in the ministry of transport test on the roller brake tester and on flat ground

This study performs a comparison between what occurs when braking on a Ministry of Transport (MOT) brake tester and on flat ground. The tire pressure is changed, but the other parameters remain constant. The results from this research and from the in-depth comparative study conducted by the mechanical engineering staff in the mechanical laboratory at the Miguel Hernández University in Elche have led to the following main conclusions: By varying the tire pressure, false results can be obtained with the MOT brake tester, which means that, if the tires are inflated at a low pressure but the brakes are in good condition, the vehicle will not pass the MOT. Conversely, if the brakes are in poor condition but the tire pressure is higher than what is recommended by the manufacturer, a false pass is produced. This article shows that the MOT brake testing equipment is often wrong and inexact, and the data and graphs presented prove that the tire pressure is a determining factor when assessing the condition of brakes.     

An investigation of passenger interchange and train standing time at LRT stations: (i) Alighting,boarding and platform distribution of passengers

The train standing-time at a station is a determinant of the line capacity and the necessary fleet-size. Its determination is usually based on the assumption that boarding and alighting is uniform at all doors of a train. Uniform boarding and alighting is conceivable if passengers distribute themselves uniformly on station platforms while waiting for trains. The validity of the uniformity assumptions is tested using data from two stations (one CBD, one suburban) of the Calgary, Alberta LRT system. It is shown that passenger distribution on the platform, alighting and boarding is not uniform and is closely related to the location of platform access points. Some strategies that will encourage uniformity are discussed. However, procedures that can estimate the standing time for non-uniform boarding and alighting need to be developed.     

Travel intensity in a city with a barrier

An analytical study is made of the determination of the travel intensity at an arbitrary point of a city with a straight line barrier. For a given origin and destination a trip is made by the shortest path not crossing the barrier or the city perimeter. The joint trip end distribution is arbitrary except for a continuity assumption.