Visualization of periodic flows over a sunroof opening by using a phase-marked PIV measurement

Flows over cavity openings are known to be highly structured and periodic due to the strong sound pressures emitted by the cavities. This article is concerned with the measurement of flow fields over the sunroof opening of an SUV. Since the PIV system used in the present work is not capable of taking phase-locked velocity fields during the measurement stage, phase-marked PIV measurements are performed and the phase-locked velocity fields are retrieved during a post-processing stage. The new PIV measurement method is shown to yield fairly accurate results with a proper choice of a phase-bandwidth. By using the phase-marked PIV measurement method, the evolution of large-scale structures in shear flow over the sunroof opening as phase changes is revealed. The detached shear layer is shown to fluctuate and then form a discrete large vortex convecting and impinging on the rear roof edge of the SUV. The average convection velocity of the vortex is calculated to be 0.45 of the nominal free stream flow velocity. Flow fields are compared for four different cases of deflector protrusion and a case without a deflector. Installation of a deflector can significantly change the flow field. For a deflector that reduces the buffeting noise by more than 10 dB, it is shown that turbulent fluctuations are initiated by the deflector but do not grow in amplitude as they convect downstream. As the deflector protrusion is increased, the amount of flow under the deflector increases in general. The flow exiting from the channel formed by the deflector and an A-frame is shown to increase the thickness of the shear layer near the leading edge of the sunroof opening.     

Hybrid three-dimensional mesh generation from quad-dominant surface meshes

A hybrid mesh generation algorithm using a modified plastering method for three-dimensional objects with variable thickness is presented. The method starts with a quad-dominant surface mesh and generates layered elements with variable thickness by using adaptive offsetting, resulting in hex-tet dominant mesh generation. Hexahedral and prismatic meshes are generated by the inward offsetting of the initial boundary mesh. In order to generate a conforming mesh, pyramid elements are constructed on top of hexahedral elements, and tetrahedral elements are generated for the remaining domain by using an advancing front method. This method is applied to several different geometries, and the effectiveness of the proposed algorithm is demonstrated.     

Experimental study of the physical and chemical characteristics of biodiesel blended fuel using ultrasonic energy irradiation

The purpose of this study is to understand the physical and chemical characteristics of biodiesel blended fuel reformed by ultrasonic energy irradiation. To do this, a mixture of commercial diesel fuel and biodiesel was compared and analyzed according to whether or not ultrasonic energy irradiation was performed and the duration of irradiation. The results of the experiments indicate that when ultrasonic energy irradiation was performed on biodiesel blended fuel, its viscosity decreased by 3–7%. In the case of BD20, when ultrasonic energy irradiation was performed, its Sauter mean diameter (SMD) dropped by 12% on average. As the irradiation duration increased, the volume ratio of olefins increased up to a maximum of 2.7%, and the higher heating value increased to a maximum of 5.8%. On the contrary, the ratio of aromatics decreased by a maximum of 2.7%, and BI decreased by a maximum of 7%.     

Children’s mode choice for the school trip: the role of distance and school location in walking to school

Rising levels of childhood obesity in the United States and a 75% decline in the proportion of children walking to school in the past 30 years have focused attention on school travel. This paper uses data from the US Department of Transportation’s 2001 National Household Travel Survey to analyze the factors affecting mode choice for elementary and middle school children. The analysis shows that walk travel time is the most policy-relevant factor affecting the decision to walk to school with an estimated direct elasticity of −0.75. If policymakers want to increase walking rates, these findings suggest that current policies, such as Safe Routes to School, which do not affect the spatial distribution of schools and residences will not be enough to change travel behavior. The final part of the paper uses the mode choice model to test how a land use strategy—community schools—might affect walking to school. The results show that community schools have the potential to increase walking rates but would require large changes from current land use, school, and transportation planning practices.

An analysis on long term emission benefits of a government vehicle fleet replacement plan in northern illinois

There have been a number of studies of the effectiveness of vehicle scrappage programs, which offer incentives to accelerated scrappage of older vehicles often thought to be high emitters. These programs are voluntary and aimed at replacement of household vehicles. In contrast, there is a gap in knowledge related to the emissions benefits of government fleet replacement (retirement) programs. In this study, the efficacy of a fleet replacement program for a local government agency in Northern Illinois, the Forest Preserve of DuPage County (FPDC), is examined using a probabilistic vehicle survival model that accounts for time-varying covariates such as vehicle age and gasoline price. The vehicle lifetime operating emissions are calculated based on the estimated vehicle survival probabilities from the survival model and compared with those derived using the EPA default fleet used in MOBILE6 and the fleet represented by the Oak Ridge National Laboratory (ORNL) survival curve. The results suggest that while there may be short term emission benefits of the FPDC fleet replacement plan, the long-term emission benefits are highly sensitive to economic factors (e.g., future gasoline price) and exhibit a decreasing trend. This indicates that an adaptive multi-stage replacement strategy as opposed to a fixed one is preferable to achieve optimal cost effectiveness.

Relationships between characteristics of motorcycles and hydrocarbon emissions in Taiwan: A note

Taiwan’s inspection and maintenance (I/M) programs identifies high-emission motorcycles but, although these help reduce air pollution, they have been criticized for being cost-ineffective. This study examines the relationship between characteristics of motorcycles and hydrocarbon emissions in the Central Air Quality Basin of Taiwan. It is shown that engine size and type, age and manufacturer of a motorcycle significantly affect HC emissions. Larger-size engines emit smaller amounts of HCs; whereas older motorcycles emitted greater amounts. In addition, two-stroke-engine machines produced significantly higher HC emission levels than four-strokes. Variations in HC emissions testing are a result of various I/M testing locations and efficiency may be improved by modifying these.     

The numerical friction line

This paper presents a study on the numerical calculation of the friction resistance coefficient of an infinitely thin plate as a function of the Reynolds number. Seven eddy-viscosity models have been selected: the one-equation turbulence models of Menter and Spalart–Allmaras; the k-ω two-equation model proposed by Wilcox and its TNT, BSL and SST variants and the two-equation model. The flow has been computed at 14 Reynolds numbers in sets of seven geometrically similar Cartesian grids to allow a reliable estimation of the numerical uncertainty. The effect of the computational domain size has been reduced to negligible levels (below the numerical uncertainty). And the same holds for the iterative and round-off errors. In the finest grids of each set, the numerical uncertainty of the friction resistance coefficient is always below 1%. Special attention has further been given to the solution behaviour in the laminar-to-turbulent transition region. Curve fits have been applied to the data obtained at the 14 Reynolds numbers and the numerical friction lines are compared with four proposals from the open literature: the 1957 ITTC line, the Schoenherr line and the lines suggested by Grigson and Katsui et al. The differences between the numerical friction lines obtained with the seven turbulence models are smaller than the differences between the four lines proposed in the open literature.     

Potential benefits of an adaptive forward collision warning system

Forward collision warning (FCW) systems can reduce rear-end vehicle collisions. However, if the presentation of warnings is perceived as mistimed, trust in the system is diminished and drivers become less likely to respond appropriately. In this driving simulator investigation, 45 drivers experienced two FCW systems: a non-adaptive and an adaptive FCW that adjusted the timing of its alarms according to each individual driver’s reaction time. Whilst all drivers benefited in terms of improved safety from both FCW systems, non-aggressive drivers (low sensation seeking, long followers) did not display a preference to the adaptive FCW over its non-adaptive equivalent. Furthermore, there was little evidence to suggest that the non-aggressive drivers’ performance differed with either system. Benefits of the adaptive system were demonstrated for aggressive drivers (high sensation seeking, short followers). Even though both systems reduced their likelihood of a crash to a similar extent, the aggressive drivers rated each FCW more poorly than their non-aggressive contemporaries. However, this group, with their greater risk of involvement in rear-end collisions, reported a preference for the adaptive system as they found it less irritating and stress-inducing. Achieving greater acceptance and hence likely use of a real system is fundamental to good quality FCW design.     

Crashworthiness of chromium plated plastic radiator grille

The use of plastic in vehicle development has increased. In particular, a design trend has resulted in chromiumplated plastics being used in exterior panels. Recently, as the appearance has become more important in design, the plastic radiator grille has become larger, to where it can become the primary member when a front collision happens. The radiator grille should be designed with considerations of the geometric structure, such as delamination, and material characteristics, when plastics are plated with chromium. The enlarged grille has to pass regulations like FMVSS Part 581. Although the material property of plastic has been studied before, what seems to be lacking is study on the crashworthiness of plastic radiator grilles that are plated using chromium. In this paper, in order to evaluate the crashworthiness, tensile test and front collision analysis using finite element method are performed. Tensile test is conducted with 4 types of materials, and then material properties of chromium-plated plastics are obtained. Meanwhile radiator grille’s crashworthiness is evaluated using finite element analysis method. Analysis result is evaluated according to failure criterion. Through this study, method of the assessment of plastic radiator grille’s crashworthiness considered material properties of chromium plated plastics is proposed, and it can be predicted the delamination and the failure point of radiator grille at the design step.     

Effect of radial interference on torque capacity of press- and shrink-fit gears

Some gears in an automobile transmission have to be mounted by being press-fitted on a shaft instead of splines. The torque capacity of the press-fitted gear will be proportional to the radial interference. The excessive interference, however, will increase the gear radial deformation. In this paper, the press- and shrink-fit and the subsequent torque capacity test were investigated by finite element analysis, theoretically and experimentally. The static and dynamic coefficient of friction were determined.