Vibration reduction of H/Shaft using an electromagnetic damper with mode change

The objective of this study is to develop a damper that can reduce the amplitude of vibration in various frequency ranges. Previous H/Shaft vibration reduction methods work in a passive way. A dynamic damper reduces the amplitude of vibration at its first mode, but vibration still appears at the second mode. A mass damper or hollow shaft can shift the natural frequency to a lower or higher region. The fixed operating frequency prevents vibration from being reduced outside the operating frequency range. The proposed damper uses electromagnets as either masses or actuators to change the damper mode between dynamic damper mode and mass damper mode. The electromagnetic damper (EMD) can change its mode to respond to the vibration excitation at both low and high frequencies. The vibration reduction performance was evaluated by FRF tests in laboratory and vehicle conditions. The results were compared with those of a dynamic damper and indicate that the amplitude of vibration is reduced by 95.6 % when the EMD is implemented on an H/Shaft, whereas only 61.9 % vibration reduction is achieved by the dynamic damper.     

Modeling multi-unit vehicle dynamics for low-speed path-following assessment off-highway

This paper proposes a non-linear dynamics model for articulated vehicles. This model is able to capture common low-speed behaviours of any articulated vehicles off-highway, such as operating for a corner or roundabout on a cambered or slippery surface. It can be used to assess the low-speed manoeuvrability of articulated vehicles under such manoeuvres and conditions. The vehicle model was validated by comparing its path tracking performance to that of the field tests.     

Vehicle response-based track geometry assessment using multi-body simulation

The assessment of the geometry of railway tracks is an indispensable requirement for safe rail traffic. Defects which represent a risk for the safety of the train have to be identified and the necessary measures taken. According to current standards, amplitude thresholds are applied to the track geometry parameters measured by recording cars. This geometry-based assessment has proved its value but suffers from the low correlation between the geometry parameters and the vehicle reactions. Experience shows that some defects leading to critical vehicle reactions are underestimated by this approach. The use of vehicle responses in the track geometry assessment process allows identifying critical defects and improving the maintenance operations. This work presents a vehicle response-based assessment method using multi-body simulation. The choice of the relevant operation conditions and the estimation of the simulation uncertainty are outlined. The defects are identified from exceedances of track geometry and vehicle response parameters. They are then classified using clustering methods and the correlation with vehicle response is analysed. The use of vehicle responses allows the detection of critical defects which are not identified from geometry parameters.     

Driver behavior formulation in intersection dilemma zones with phone use distraction via a logit-Bayesian network hybrid approach

Use of cellular phone while driving is one of the top contributing factors that induce traffic crashes, resulting in significant loss of life and property. A dilemma zone is a circumstance near signalized intersections where drivers hesitate when making decisions related to their driving behaviors. Therefore, the dilemma zone has been identified as an area with high crash potential. This article utilizes a logit-based Bayesian network (BN) hybrid approach to investigate drivers' decision patterns in a dilemma zone with phone use, based on experimental data from driving simulations from the National Advanced Driving Simulator (NADS). Using a logit regression model, five variables were found to be significant in predicting drivers' decisions in a dilemma zone with distractive phone tasks: older drivers (50–60 years old), yellow signal length, time to stop line, handheld phone tasks, and driver gender. The identified significant variables were then used to train a BN model to predict drivers' decisions at a dilemma zone and examine probabilistic impacts of these variables on drivers' decisions. The analysis results indicate that the trained BN model was effective in driver decision prediction and variable influence extraction. It was found that older drivers, a short yellow signal, a short time to stop line, nonhandheld phone tasks, and female drivers are factors that tend to result in drivers proceeding through intersections in a dilemma zone with phone use distraction. These research findings provide insight in understanding driver behavior patterns in a dilemma zone with distractive phone tasks.     

A tool to aid redesign of flexible transport services to increase efficiency in rural transport service provision

Rural areas generally have lower and more dispersed demands for travel which cannot sustain conventional public transport services and consequently have a greater number of flexible and demand responsive transport services operating. These services usually operate on a stand-alone basis, are often subsidized and are typically only accessible by certain passenger types or for specific trip purposes. This generally results in uncoordinated and inefficient transport provision overall. The Flexible integrated transport services (FITS) system featured in this paper has been designed to address this problem. FITS can be used as a planning tool to assess potential benefits from relaxing operating constraints (e.g., a service's operating boundaries), which can potentially suggest service redesign. It also includes the capacity to assign subsidy payments on a trip by trip basis to increase cost efficiency whilst meeting a greater proportion of transport needs. The case study in the paper focusses on transport to health in the Aberdeenshire and Morayshire areas of Scotland in the UK. Despite flexible transport operators receiving public funds to meet passenger needs, this is currently being supplemented by public bodies paying large amounts in taxi fares in instances where there is a statutory obligation to provide travel but where no other suitable transport service exists. The results demonstrate the potential substantial savings which could be realized by allowing transport operators to redesign their services by relaxing constraints and by the reassignment of subsidies: resulting in more passenger demands being met and a reduction in public spending on taxi fares.     

Train-Track Interaction and Mechanisms of Irregular Wear on Wheel and Rail Surfaces

Summary High-frequency train-track interaction and mechanisms of wheel/rail wear that is non-uniform in magnitude around/along the running surface are surveyed. Causes, consequences and suggested remedies to relieve the problems are discussed for three types of irregular wheel/rail wear: (1) short-pitch rail corrugation on tangent tracks and large radius curves, (2) wheel corrugation as caused by tread braking, and (3) wheel polygonalisation. The state-of-the-art in modelling of dynamic train-track interaction in conjunction with prediction of irregular wear is reviewed.     

一种用汽油燃烧系统模拟发动机台架催化剂热老化的方法

采用通用汽车公司的快速老化程序RAT-A，分别在FOCAS燃烧系统及发动机上对催化剂在老化前和老化后的性能进行对比试验。结果表明，FOCAS燃烧系统能够对催化剂进行和发动机类似的老化。与发动机台架试验相比，FOCAS系统有明显的优点，如严格地控制空燃比使其变化幅度很小、空燃比稳定运行的范围宽、活动部件少及易操作等。     

微注射成形实验与数值模拟

为研究注射料的流动性和模腔形状的复制能力,加工了含有微流道的模具,在微注射系统上进行了微注射实验.应用基于矢量化显式算法的程序,在不同壁面边界条件下,对微注射实验进行了模拟.结果表明:在注射料温度220 ℃、模具温度40 ℃、注射流量为20 mm3/s、注射时间1 s、保压时间10 s的注射工艺条件下,聚丙烯能较好的复制长5 mm,宽1.5 mm和厚0.8 mm的微流道形状.采用滑移边界条件的微注射模拟结果与实验结果一致,说明微注射中存在边界滑移速度.     

��ͨ�¹ʳ���ʱ���������

对交通事故持续时间分析的发展现状进行了综述．首先简要介绍了交通事故的定义，事故种类和交通事故管理系统，并分析了交通事故持续时间的统计分布．然后，对最近应用的几种主要的交通事故持续时间的分析方法及结论进行了概述．主要包括：方差分析，线性回归，非参数回归，决策树法，hazard duration method，模糊逻辑．主要的结论包括；大量的研究发现交通事故持续时间的分布形状是向左偏斜的钟型分布．交通事故数据采集标准化是事故分析中非常重要的环节．传统的统计分析方法处理不完整的数据有局限性．最后，本文提出了将来的发展方向，包括应用人工智能方法建立事故持续时间模型，及建立交通事故数据库标准．     

White Layer of Hard Turned Surface by Sharp CBN Tool

IntroductionHard turning has been recognized as one of themost competitive clean machining technologies inreplacing of abrasive-based processes, with the de-velopment of high precision numerical machinetools and super-hardness tool material such as ce-ramic, CBN/PCBN (Cubic Boron Nitride/Poly-crystalline Cubic Boron Nitride)[1,2]. Hard turningoperation has shown geometrical flexibility, eco-nomics advantage, environmental friendliness, andsuperior surface integrity which is usually define…