Suboptimal Control Design of Active and Passive Suspensions Based on a Full Car Model

An optimal control design method is introduced and then applied to the optimum design of active and passive suspension systems. A basic three-dimensional 7-DOF car riding model subjected to four correlated random road inputs is considered. The design method is basically developed to allow arbitrary choice of sensors for various car state variables to be used for feedback control of each suspension unit. Previous studies show that full-state control laws and even some limited-state control laws often include feedback gains which are almost zero. Some other gains, although not zero, don't play an important role in improving the system performance measures. With the method proposed in this work, every suspension unit can have its own feedback measurements and the criterion function can be related to all state and control variables. Thus a large number of active and semi-active suspension systems with full- or limited-state control laws based on different measurement combination can be suggested, studied, and compared with each other. Instead of comparing these optimized active and semi-active suspension systems with a basic, passive suspension, the passive system itself is optimized with the same criterion. Simulations in the time domain and frequency analyses are performed, and comparisons are made among the systems in terms of r.m.s. car response measures and ISO riding comfort criterion.     

按运量增长规划铁路牵引供电系统的发展

提出了确定铁路牵引供电系统发展最佳途径的课题，并建议采用动态规划法解决这一课题。     

Design and implementation of a UPnP-can gateway for automotive environments

In this paper, we propose a universal plug and play (UPnP) — controller area network (CAN) gateway system using UPnP middleware for interoperability between external smart devices and an in-vehicle network. The proposed gateway consists of a UPnP communication device, a CAN communication device, and a device translator layer. In-vehicle devices are not usually IP-based, so we implemented an in-vehicle device manager in the UPnP communication device which is in the gateway. We developed a vehicle simulator to produce real vehicular data for performance analysis. The CAN communication device transmits and receives real-time vehicle data between the real vehicular simulator and external devices through the UPnP. The device translator layer configures a message frame for enabling seamless data input and output between the CAN and UPnP protocols. After implementation, we generated an internal-external service request and tested the result. Finally, we confirmed the service request and operation between external devices and the internal vehicular device. Additionally, for a variety of external device numbers and communication environments, we demonstrated the gateway performance by measuring the round trip time (RTT) for overall service implementation.     

3-D numerical and experimental analysis for airflow within a passenger compartment

People use cars so frequently that they always consider the air-conditioning, and thermal comfort of the driver and passenger when buying a new car. Therefore accurate simulation of the thermal performance of automobile air conditioners to improve human comfort has become increasingly important. In order to improve the thermal comfort of passengers, 3-D flow motion and thermal behavior within vehicles must be analyzed. In this paper, a numerical simulation was used to investigate thermal behavior in a vehicle. Because air temperature at an air vent is related to the cooling capacity of the air conditioner, the cooling capacity was calculated using ɛ-NTU (effective number of transfer unit) theoretical equations. Using the air temperature relationship between inlet and outlet vents as boundary conditions, a 3-D unsteady κ-ɛ turbulent model was used to give a transient analysis simulation of the temperature field and flow conditions in a vehicle’s passenger cabin. Cooling cycle analysis and conjugate heat transfer analysis at the inside surface of the cabin’s ceiling, floor and sides were also considered. The predicted temperature distributions in the vehicles passenger cabin were in good agreement with those obtained experimentally.     

Le transport ferroviaire régional de voyageurs : un processus collectif d’apprentissage

Regional passenger rail services are prevalent in France, as opposed to the more marginal role they play elsewhere in the world. It is indeed at the regional level that reforms have been successfully implemented, probably because the process was gradual and cautious. Initially in 1997, seven regions began experimenting with a decentralized system of regional passenger transportation services. By 2002, all metropolitan regions, with the exception of Corsica and Ile-de-France, were involved. Today we have reached a point where this process can be retrospectively and prospectively assessed. This article is first a retrospective assessment of the role of actors and the emerging dynamic between regional passenger rail transport supply and demand. Then, a prospective evaluation is offered since regionalization is best understood as an ongoing learning process that can be discontinuous or continuous.     

俄罗斯铁路的微机联锁系统

简要回顾俄罗斯铁路联锁系统的发展历史，对继电器成本进行了经济有效性比较，介绍俄罗斯铁路微机联锁系统的组成。     

Development of a low-noise cooling fan for an alternator using numerical and doe methods

An alternator, which converts mechanical rotational energy into electrical energy, is an important component of a vehicle. Alternators operate over a broad range of rotational speeds, typically from 3,000 RPM to 18,000 RPM, which demands a cooling fan producing sufficient airflow, ideally with a minimum of noise. In the current study, an optimized alternator-cooling fan was developed through a linked DOE(Design OF Experiment) process and numerical analysis. The SC/Tetra and FlowNoise S/W programs were used to calculate flow rates and noise levels, respectively, for the newly developed fan. Compared with original model, the numerical results predicted a 3 dBA noise reduction; the measured reduction was 4 dBA.     

Performance Index for a Preview Active Suspension Applied to a Quarter-Car Model

A simple and convenient matrix expression is derived for the performance index in the case of a linear vehicle model with two degrees of freedom and a preview active suspension, subject to a unit step road input and employing optimal control. The usual quadratic integral-type performance index is assumed and the effect of an additional form of constraint is described briefly. The effects of preview time on the performance index and the optimal feed-forward control are illustrated graphically for a particular example.     

The delimitation of exclusive economic zones

In this paper Admiral Kapoor examines some of the problems relating to the delimitation of maritime boundaries, particularly that of exclusive economic zones, as they affect the hydrographic surveyor.