RMS Values of Force, Stroke and Tyre Deflection in a Half-Car Model with Preview Controlled Active Suspension

Summary Matrix expressions are developed for the direct computation of rms values for the optimal control forces, front and rear suspension strokes and dynamic tyre deflections in a half-car model on a random road of given roughness. A quadratic performance index is employed with assumed weighting factors and evaluated in the same computation.     

Changes in perceived travel cost and time for the work trip during a period of increasing gasoline costs

This study was designed to examine the relationship between actual and perceived values of cost and time for the work trip and to examine how perceptions have changed over a period of dramatically increased travel costs. Variations in the relationship between perceived and actual values were examined as a function of situational and attitudinal variables. Two telephone surveys were conducted one year apart (Fall 1978 and Fall 1979). On the next working day following a survey, a research assistant recreated the respondent's work trip, recorded time values and used distance measures, car type information and parking costs to compute travel cost. The first survey revealed that most auto users were unable to articulate dollars-and-cents driving costs for the work trip, but auto users in the second survey were able to provide fairly accurate cost estimates. Dramatic changes in fuel prices between surveys is probably the main reason for the change in driving cost awareness. Auto users were also asked to rate relative costs of driving a car compared to using the bus for the work trip. These ratings showed that auto users tended to underestimate driving costs relative to bus costs, but this tendency decreased from the first to the second time period. Commuters in all modal groups at both time periods tended to overestimate travel times. Perception of travel time varied as a function of mode, perceived comfort (for car users), and perceived convenience and number of transfers (for bus users).To whom correspondence should be addressed.     

Optimal Active Suspension Design Using a Frequency-shaping PID Filter

By the incorporation of frequency-shaping into the linear quadratic methods used in active suspension design it is possible to achieve improvements in both body frequency response and road-holding. The use of a PID filter for this purpose also leads to robustness of the system to disturbance forces. Zero steady-state deflections are achieved for applied body loads by the integral action with excellent attenuation of the transient response. The resulting system consists of a hydraulic actuator in parallel with a body spring of arbitrary stiffness and is optimal with equivalent full state feedback.     

Effects of household structure and selected travel characteristics on trip chaining

This paper analyzes trip chaining, focusing on how households organize non-work travel. A trip chaining typology is developed using household survey data from Portland, Oregon. Households are organized according to demographic structure, allowing analysis of trip chaining differences among household types. A logit model of the propensity to link non-work trips to the work commute is estimated. A more general model of household allocation of non-work travel among three alternative chain types — work commutes, multi-stop non-work journeys, and unlinked trips — is also developed and estimated. Empirical results indicate that the likelihood of linking work and non-work travel, and the more general organization of non-work travel, varies with respect to household structure and other factors which previous studies have found to be important. The effects of two congestion indicators on trip chaining were mixed: workers who commuted in peak periods were found to have lower propensity to form work/non-work chains, while a more general congestion indicator had no effect on the allocation of non-work trips among alternative chains.     

Optimal Linear Active Suspensions with Vibration Absorbers and Integral Output Feedback Control

The bandwidth of the body response to a road input in an active suspension may be considerably reduced if the axle motions are independently controlled and if, at the same time, the effects of static and dynamic loads are counteracted by integral action in the body force control system. The paper presents a further application of the Ferguson-Rekasius method, leading to optimal output control with incomplete state feedback. To achieve narrow bandwidth body response the support springs are replaced by hydraulic actuators, and vibration absorbers or active wheel dampers are employed for the control of the axle motions. Active wheel damping is the more effective and gives good results. Proportional-plus-integral control action is shown to reduce the transient body displacements due to external forces.     

Optimal Linear Active Suspensions with Integral Constraint

This paper considers the application of linear optimal control to the design of an active automobile suspension system. By inclusion of an integral constraint in the performance index it is possible to achieve zero steady state axle to body response to both static body forces and ramp road inputs. Full state feedback is achieved by reconstructing the state variables from easily measured quantities.     

U.S. import/export container flow modeling and disruption analysis

International containerized freight movement is a vital part of the supply chain for many companies, and a critical element of moving consumer goods to points of retail sale within the U.S. Containerized imports also present a clear security concern (e.g., terrorists attempting to ship “dirty bombs,” chemical, biological or even nuclear weapons, into the U.S. in a shipping container). The goal of the research presented here is to create a modeling tool for analyzing flows of U.S. imports and exports of containerized freight, and the potential changes in those flows under a variety of conditions (e.g., port disruptions, extensive security-related delays, etc.). Our focus is on movements through maritime container ports, and not overland movements between the U.S. and Canada or Mexico.The network model, referred to as the System for Import/Export Routing and Recovery Analysis (SIERRA), represents container movements between the U.S. and 46 other countries that account for the vast majority of U.S. imports and exports. The SIERRA model is a network equilibrium model that predicts flows between foreign countries and North American ports, the total volumes handled (import and export) by each port, the modal volumes (truck and rail) moving domestically into and out of each port, and volumes between each port and a set of transportation analysis zones within the U.S.     

Stated willingness to participate in travel surveys: a cross-country and cross-methods comparison

Transportation - Travel surveys are the primary source of data that feed into the analysis and modeling of travel behaviour. Numerous studies have found that the survey method, be it pen and paper,...     

Slam events of high-speed catamarans in irregular waves

Slam events experienced by high-speed catamarans in irregular waves were characterised through experiments using a hydroelastic segmented model. The model was designed to represent the dynamic behaviour of the full-scale Incat 112 m vessel and to allow the measurement of the slam load on the centrebow and wet deck. It was tested in irregular head seas at two speeds relating to Froude numbers of 0.32 and 0.60. Nearly 300 slams were identified in the test data and analysed with respect to kinematic parameters. Slams were found to have a large range of magnitudes, with the largest equivalent to 1785 tonnes full scale (approximately 70% of vessel displacement); however, the majority of events were of relatively low severity. Differences in slam characteristics were found for the two model speeds tested; slams at the slower speed generally occurred further forward on the hull, prior to the wave crest and with a bow down pitch angle. Immersion of the centrebow to the two-dimensional filling height of the cross-section between the centrebow and demihulls is shown to be a better indicator of slam occurrence than immersion to the top of the archway.