基于信息系统的体系作战炮兵战斗指挥效能评估

基于信息系统的体系作战炮兵战斗指挥效能评估,通过对影响炮兵战斗指挥优劣的众多因素进行分析,从作战系统的整体观念出发,把无法计量的因素和定量分析获得的数据联系在一起,设计出科学合理的指标体系,并在单项指标评估的基础上,将结果进行综合分析,做出对炮兵战斗指挥优劣的全面统一判断。     

对“宙斯盾”相控阵雷达的干扰方法研究

通过对"宙斯盾"相控阵雷达抗干扰措施的分析,提出了相应的干扰对策,从而形成了对抗"宙斯盾"相控阵雷达的无人机"蜂群"干扰方法。     

Design of an adaptive controller for dive-plane control of a torpedo-shaped AUV

Underwater vehicles operating in complex ocean conditions present difficulties in determining accurate dynamic models. To guarantee robustness against parameter uncertainty, an adaptive controller for dive-plane control, based on Lyapunov theory and back-stepping techniques, was proposed. In the closed-loop system, asymptotic tracking of the reference depth and pitch angle trajectories was accomplished. Simulation results were presented which show effective dive-plane control in spite of the uncertainties in the system parameters.     

舰船舷侧液舱防护设计(英文)

Based on the traditional Smoothed Particle Hydrodynamics (SPH) algorithm, the linked-list search algorithm combined with the variable smoothing length and square support domain was put forward to improve the calculation efficiency and guarantee the calculation accuracy. The physical process of high velocity fragment impact on a broadside liquid cabin was programmed for simulation. The numerical results agreed well with those of the general software ANSYS AUTODYN, which verifies the effectiveness and feasibility of the numerical method. From the perspective of the outer plate thickness of the liquid cabin, the width of the liquid cabin, and incident angle of the fragment, the influence of these parameters on protective mechanisms was analyzed to provide a basis for protective design of a broadside liquid cabin. Results show that the influence of outer plate thickness is not obvious; therefore, the conventional design can be adopted in the design of the outer plate. The width of the liquid cabin has a great influence on the residual velocity of the fragment and the width of the liquid cabin should be designed to be as wide as possible under the premise of meeting other requirements. There is a certain incident angle in which the velocity attenuation of the fragment is most obvious, and the high-pressure zone near the inner plate is asymmetric. The inner plate of liquid cabin should be strengthened according to the hull form, principal dimensions, and vulnerable points.     

船用钛及钛合金的焊接问题及对策

结合多年来在船用钛合金焊接应用研究和工程结构建造的经验,介绍了我国船用钛合金焊接的主要问题和解决措施,以及我国船用钛合金基本焊接性能,对船用钛合金的焊接及工程结构的建造具有一定的指导作用.     

自卸船改装散货船结构强度和屈曲有限元分析

以3000t级自航自卸专用运煤船改装成5000t级散货船为例,利用有限元软件MSC.Patran/Nastran建立有限元模型对船体结构进行强度评估,并对纵骨架式甲板、船底和内底板格的屈曲强度进行校核.对于强度不满足的部位提出加强力案.     

一种快速除法算法的FPGA实现

介绍了一种新的除法算法,该算法是利用Taylor公式,用两次乘法操作和一张较小的查找表实现。整个算法采用verilog语言描述,设计灵活、实现简单。仿真效果表明该算法具备较高的精度与较快的运算速度。     

附加系统参数平差在高速铁路CPⅢ控制网数据处理中的应用

高速铁路CPⅢ控制网测量中距离观测值可能存在系统性的固定误差或比例误差。针对该问题,探讨了采用附加系统参数的平差方法进行CPⅢ控制网数据处理,并以一个实际高速铁路CPⅢ控制网为例,对附加系统参数的平差方法和经典约束平差方法进行了比较与分析。通过研究,得出了有益结论：对于存在系统误差的CPⅢ控制网,可预先估计可能存在的系统误差,通过引入附加参数进行自动补偿,平差结果更为可靠。     

高速公路立交入口区域行车风险评价模型

分析了高速公路立交入口区域车辆行车特征,提出了碰撞危险指数概念,考虑了碰撞可能性系数、碰撞车辆速度差、目标车道跟驰车辆在碰撞时的速度、加速度、前后车辆间距5个因素,将入口区域车辆可能发生的碰撞行为分为5种情形,研究了5种情形的发生条件,建立了相应的风险评价模型。针对不同的主线车辆运行车速、车头间距和匝道驶入车辆运行车速...     

TBM引进以来存在问题之回顾及对策

TBM引入中国已有十几年,笔者亲历了几个隧道工程施工全过程.反思设备设计、选型和维护使用出现的误区,例如掘进机刀盘对岩石的适应性估计不到位,导致刀盘磨损严重;主机性能应与后配套正确匹配;整机散热应与隧道通风携带热量保持平衡;主轴承使用的关键是保持良好的润滑周边条件等.就这些现象与问题提出一些解决思路和对策,可供同行参考...