Major sources of hydrocarbon emissions in a premixed charge compression ignition engine

Although premixed charge compression ignition (PCCI) combustion engines are praised for potentially high efficiency and clean exhaust, experimental engines built to date emit more hydrocarbons (HCs) and carbon monoxide (CO) than the conventional machines. These compounds are not only strictly controlled components of the exhaust gas of road vehicles but are also an energy loss indicator. The prime objective of this study was to investigate the major sources of the HCs formed in the combustion chamber of an experimental PCCI engine in order to suggest some effective technologies for HC reduction. In this study, to explore the dominant sources of HC emissions in both operation modes, a single cylinder engine was prepared such that it could operate using either conventional diesel combustion or PCCI combustion. Specifically, the contributions of the top-ring crevice volume in the combustion chamber and the bulk quenching of the lean mixture were investigated. To understand the influence of the shape and magnitude of the crevice on HC emissions, the engine was operated with 12 specially prepared pistons with different top-ring crevices installed one after another. The engine emitted proportionally more HCs as the depth of the crevice increased as long as the width remained narrower than the prevailing quench distance. The top-ring-crevice-originated exhaust HCs comprised approximately 31% of the total HC emissions in the baseline condition. In a series of tests to estimate the effects of bulk quench on exhaust HC emissions, intake air was heated from 300K to 400K in steps of 25K. With the intake air heated, HC and CO emissions decreased with a gradually diminishing rate to zero at 375K. In conclusion, the most dominant sources of HC emissions in PCCI engines were the crevice volumes in the combustion chamber and the bulk quenching of the lean mixtures. The key methods for reducing HC emissions in PCCI engines are minimizing crevice volume in the combustion chamber and maximizing intake air temperature allowed based on the permissible NOx level.     

Aerodynamic design optimization of rear body shapes of a sedan for drag reduction

This study proposes an aerodynamically optimized outer shape of a sedan by using an Artificial Neural Network (ANN), which focused on modifying the rear body shapes of the sedan. To determine the optimization variables, the unsteady flow field around the sedan driving at very fast speeds was analyzed by CFD simulation, and fluctuations of the drag coefficient (C _D ) and pressure around the car were calculated. After consideration of the baseline result of CFD, 6 local parts from the end of the sedan were chosen as the design variables for optimization. Moreover, an ANN approximation model was established with 64 experimental points generated by the D-optimal methodology. As a result, an aerodynamically optimized shape for the rear end of the sedan in which the aerodynamic performance is improved by about 5.64% when compared to the baseline vehicle is proposed. Finally, it is expected that within the accepted range of shape modifications for a rear body, the aerodynamic performance of a sedan can be enhanced so that the fuel efficiency of the sedan can be improved. The YF SONATA, a sedan manufactured by Hyundai Motors Corporate, played a major role in this research as the baseline vehicle.     

Evasive manoeuvres with a steering robot

In the pursuit of an objective rating on vehicle stability performance, it is always desirable to reduce disturbances and inconsistencies during experimental evaluations, especially the ones introduced by human drivers. This paper presents the development of a steering robot designed for closed-loop steering tasks during evasive manoeuvres. It describes the controller structure and discusses experimental results, in addition to simulation/vehicle model verifications and theoretical control analysis.     

Distributed support modelling for vertical track dynamic analysis

The finite length nature of rail-pad supports is characterised by a Timoshenko beam element formulation over an elastic foundation, giving rise to the distributed support element. The new element is integrated into a vertical track model, which is solved in frequency and time domain. The developed formulation is obtained by solving the governing equations of a Timoshenko beam for this particular case. The interaction between sleeper and rail via the elastic connection is considered in an analytical, compact and efficient way. The modelling technique results in realistic amplitudes of the ‘pinned–pinned’ vibration mode and, additionally, it leads to a smooth evolution of the contact force temporal response and to reduced amplitudes of the rail vertical oscillation, as compared to the results from concentrated support models. Simulations are performed for both parametric and sinusoidal roughness excitation. The model of support proposed here is compared with a previous finite length model developed by other authors, coming to the conclusion that the proposed model gives accurate results at a reduced computational cost.     

Method for obtaining the wheel–rail contact location and its application to the normal problem calculation through ‘CONTACT’

This work presents a robust methodology for calculating inter-penetration areas between railway wheel and rail surfaces, the profiles of which are defined by a series of points. The method allows general three-dimensional displacements of the wheelset to be considered, and its characteristics make it especially suitable for dynamic simulations where the wheel–rail contact is assumed to be flexible. The technique is based on the discretisation of the geometries of the surfaces in contact, considering the wheel as a set of truncated cones and the rail as points. By means of this approach, it is possible to reduce the problem to the calculation of the intersections between cones and lines, the solution for which has a closed-form expression. The method has been used in conjunction with the CONTACT algorithm in order to solve the static normal contact problem when the lateral displacement of the wheelset, its yaw angle and the vertical force applied in the wheelset centroid are prescribed. The results consist of smooth functions when the dependent coordinates are represented as a function of the independent ones, lacking the jump discontinuities that are present when a rigid contact model is adopted. Example results are shown and assessed for the normal contact problem for different lateral and yaw positions of the wheelset on the track.     

A tool to aid redesign of flexible transport services to increase efficiency in rural transport service provision

Rural areas generally have lower and more dispersed demands for travel which cannot sustain conventional public transport services and consequently have a greater number of flexible and demand responsive transport services operating. These services usually operate on a stand-alone basis, are often subsidized and are typically only accessible by certain passenger types or for specific trip purposes. This generally results in uncoordinated and inefficient transport provision overall. The Flexible integrated transport services (FITS) system featured in this paper has been designed to address this problem. FITS can be used as a planning tool to assess potential benefits from relaxing operating constraints (e.g., a service's operating boundaries), which can potentially suggest service redesign. It also includes the capacity to assign subsidy payments on a trip by trip basis to increase cost efficiency whilst meeting a greater proportion of transport needs. The case study in the paper focusses on transport to health in the Aberdeenshire and Morayshire areas of Scotland in the UK. Despite flexible transport operators receiving public funds to meet passenger needs, this is currently being supplemented by public bodies paying large amounts in taxi fares in instances where there is a statutory obligation to provide travel but where no other suitable transport service exists. The results demonstrate the potential substantial savings which could be realized by allowing transport operators to redesign their services by relaxing constraints and by the reassignment of subsidies: resulting in more passenger demands being met and a reduction in public spending on taxi fares.     

地震作用下框架-复合墙结构弹塑性内力计算

框架-复合墙结构是以框架和密肋复合剪力墙共同承担水平地震作用的新型组合式双重抗侧力体系,合理计算弹塑性阶段框架与复合墙的内力是决定大震下结构体系安全性能的关键问题之一.根据6榀典型密肋复合墙试验数据,建立了复合墙体指数式刚度退化模型,量化了墙体在各变形阶段的刚度退化系数.在对比复合墙与框架、混凝土墙、砌体墙刚度退化规律的基础上,分析了复合墙刚度退化对结构受力性能的影响,提出了弹塑性阶段框架-复合墙结构地震内力的实用计算方法,并通过具体算例讨论了结构内力的变化情况.研究结果表明：弹塑性阶段,框架与密肋复合墙刚度退化速度比值呈非线性关系,框架分担总地震剪力的比例增加,但其绝对剪力值增加幅度并不明显;考虑弹塑性阶段复合墙的刚度退化,更好地符合了地震下框架-复合墙结构的实际受力情况.     

20世纪美国应对机动性的交通构想及高速公路发展历程

为了阐述20世纪除汽车机动性外,交通发展经历的最重要的进程——城市高速公路的出现,考察了过去100年来美国城市交通规划的历史。通过回顾各种研究资料,认为资助州际公路发展所采用的方法使联邦和州公路工程师成为主管,这影响了公路的选线及设计。联邦公路工程师只关注机动车通过效率的最大化,而在很大程度上忽略了城市的其他利害关系。没有先进的规划理念指导、过度建设、稀疏、放射环状的道路网对于加强机动性取得了极大的效益,但通常要为此付出巨大的社会和环境成本。最后指出,在实践中要重新审视具有百年历史的协调交通与土地利用规划的观点,而且,公共财政权宜之计式的政治决策方式将对工程、出行和城市形态产生深远的影响。·     

Biologically induced modification of seawater viscosity in the Eastern English Channel during a Phaeocystis globosa spring bloom

To identify the potential relationship between Pheaocystis globosa bloom conditions and seawater properties, a hydrobiological survey was performed in the inshore waters of the Eastern English Channel over the course of the phytoplankton spring bloom. Chlorophyll concentration, auto- and hetero/mixotrophic composition of protists and standing stock, and seawater viscosity were measured weekly from March to June 2004. The decline of the bloom is characterized by a massive foam formation in the turbulent surf zone. Before foam formation, seawater viscosity significantly increased, showing a significant positive correlation with chlorophyll concentration. In contrast, after foam formation this correlation was negative, seawater viscosity kept increasing despite a sharp decrease in chlorophyll concentrations. No significant correlation has been found between seawater viscosity and the composition of the phytoplankton assemblages observed during the survey. However, significant positive correlations have been found between seawater viscosity and both the size and the abundance of P. globosa colonies. From the correlation patterns observed between chlorophyll concentration and seawater viscosity, we suggest that the rheological properties of seawater are mainly driven by extracellular materials associated with colony formation and maintenance rather than by cell composition and standing stock.     

Biochemical composition of marine sediment from the eastern Weddell Sea (Antarctica): High nutritive value in a high benthic-biomass environment

Within the SCAR's international EASIZ programme, as part of the benthic–pelagic coupling experiment, grain size and organic matter contents in marine surface sediment were measured. Samples were taken during the austral autumn of 2000 from 3 regions in the eastern Weddell Sea: Kapp Norvegia, Four Seasons Bank, and Austasen.In general, sediments were fine sand with a grain size fraction < 200 μm representing more than 40% of the total weight. The sediments from Four Seasons Bank (64 to 107 m depth) were coarser than those from Austasen and Kapp Norvegia (209 to 480 m depth), presumably due to winnowing of fine sediment at shallow depths. Organic carbon (OC) content ranged from 0.25% to 1.2% and constituted 10% to 97% of the total carbon. The samples from Kapp Norvegia presented the highest OC values. Overall, protein (PRT), lipid (LPD), and carbohydrate (CHO) contents were similar to those in sediment from cold regions (e.g., the North Atlantic and the Ross Sea) but higher than those in sediment from other Antarctic and more septentrional regions (e.g., the Ross Sea and the Mediterranean). The difference within the Antarctic is explained through the local conditions in Terra Nova Bay and Kapp Norvegia. In the Antarctic, PRT and LPD carbon were the main contributors to the biopolymeric carbon (BPC). In the eastern Weddell Sea shelf, the BPC accounted for more than 90% of the OC in most of the samples. More than 82% of the total PRT, LPD, and CHO were present in the fraction < 200 μm. This work remarks the existence of sediments with a high nutritional value persistent several weeks after the spring–summer pulse of fresh organic matter. It is also highlighted the high potential availability of these sediments (due to its grain size) for the benthic communities inhabiting this high-latitude continental shelf.