我国生命法的现状及其体系的构建与完善

生命法是我国的一个新兴法律部门。我国生命立法主要侧重于行政规制，在民事调整和刑事防范方面还存在许多空白，而且，严格来说，我国生命立法目前还难以真正成为一个体系。我国生命法律体系应当包括以下几个部分：宪法关于保护人民生命健康的规定；生命基本法；单项生命法；与人们生命健康有关的各类卫生标准、技术规范和操作规程；其他部门立法中调整生命社会关系的法律规范。立法应以此为基点构建和完善我国的生命法律体系。     

The use of polycyclic aromatic hydrocarbons as a particulate tracer in the water column of Gaoping (Kaoping) Submarine Canyon

Time-series samples of settling particles were collected in the water column of Gaoping (formerly spelled Kaoping) Submarine Canyon (KPSC) with two sediment traps on taut-line moorings deployed at two different depths (60 and 280 m) between May 26 and June 27, 2004. Average total polycyclic aromatic hydrocarbon (PAH) concentrations of upper and lower trap array samples were 310 ± 61 ng g^− 1 dw (range: 200–440) and 240 ± 36 ng g^− 1 dw (range: 180–290), respectively. Principal component analysis results suggest that PAH sources in the trap-collected particles included diesel vehicle/coal burning, diagenetic sources, and petroleum release. PAH downward fluxes based on settling particles were estimated to be 12–44 μg m^− 2 d^− 1. These values are higher than those reported in the literature for most coastal areas. During the sampling period, both traps were significantly tilted by tidal current and fluctuated vertically. The upper traps experienced greater vertical movements, thus their particle characteristics (e.g., POC, particle mass, and fine particle fraction) varied more than those of the lower traps. Hourly depth variations of the tilted sediment trap array were echoed by the corresponding total PAH concentrations. Moreover, the PAH composition of the collected particles was related to the flow direction and speed. These observations suggest that PAHs can be used as an effective chemical tracer for the transport of terrestrial and marine particulates in a complex aquatic environment like Gaoping (Kaoping) Submarine Canyon.     

绞缆筒的系列化设计探讨

对在编制绞缆筒系列图册的过程中,如何在轴强度、键强度、绞缆筒强度、缆绳强度,额定拉力、轮毂长度、绞缆简直径及长度、毛坯通用等诸多因素同时满足的条件下,进行系列设计作了探讨。     

IETM在舰船机电设备信息化保障中的应用

舰船机电设备的信息化保障是部队战斗力的关键因素之一。传统的设备维修保障方式已无法满足部队信息化的要求,通过交互式电子技术的运用,建立实时交互的舰船机电设备管理平台,可提高机电设备维修保障的信息化水平和效率。针对舰船机电设备发展趋势及维修管理的要求,采用VB语言编制了舰船机电设备交互式电子手册,并对研制过程中的主要技术问题和系统进行了介绍,对于编制设备技术手册和舰船完工文件具有指导作用。     

A two-phase model for dry port location with an application to the port of Dalian in China

This paper provides guidance for an optimal and reasonable dry port layout for the port of Dalian in China. We present a two-phase framework on the location of dry ports, which solves the selection of candidate inland cities and optimal dry port location choice, respectively. Fuzzy C-Means Clustering is applied to select alternative cities in the vast hinterland of the seaport of Dalian, with a view to identify evaluation factors that affect the location selection decision. A cost-minimisation linear programming solution is proposed, with the aid of a genetic algorithm, to choose the optimal location as well as capacity level among the candidate inland cities.     

集中排烟隧道近火源顶板热参数理论预测

由于集中排烟模式能较好地控制上下游烟气的扩散范围,故被广泛应用于长大隧道设计中。文章针对小尺度火灾,建立了集中排烟隧道火源热烟羽受限发展理论模型,与已有火灾实验结果进行对比,完成了理论模型的验证,预测了顶板下方最高烟气温升、偏移距离等热参数。预测结果表明:火灾强度一定时,烟气最大温升随等效风速增加而急剧下降,且火灾强度对烟气温升的影响也较为显著;当等效风速超过1.5 m/s时,最大温升变化趋缓直至恒定;等效风速较小时,羽流未发生明显偏移,随着等效风速进一步增大,偏移距离明显增大,其变化速率随火灾强度的增大而减小。经回归整理得到了顶板下方烟气最大温升、偏移距离的无量纲准则关联式。     

小净距隧道洞口通风交叉污染的数值分析及工程处治措施

在小净距隧道通风过程中,会出现排出的污染空气被吸人到邻近隧道中的交叉污染,严重影响隧道通风的性能和效率.文章以北固山隧道洞口段及隧道外空气域为分析对象,采用k-ε双方程紊流模型及组分传输方程组,借助Fluent软件,模拟不同速度自然风,针对现有洞口设计、洞口外设置中隔墙以及出口施做明洞3种情况,研究隧道洞口以外污染物扩散对邻近隧道的影响.研究表明:隧道洞口接一段距离的明洞,对缓解通风交叉污染效果是非常明显的.     

"盖挖法"在近接既有建筑物的大跨隧道施工中的应用

针对大跨隧道洞口段埋深浅、邻近既有建筑物的工程特点,在国内外研究成果的基础上,对近接施工影响程度及范围进行了分析,并对各施工方案进行详细比选.结果表明,"盖挖法"不但能克服传统方法带来的各种不利因素,而且能够确保隧道的施工进度和既有建筑物的安全,同时可减少对洞口生态环境的破坏,是最佳的近接施工方案.     

钢板桩挡土结构加固方法研究

基于天津港某码头钢板桩在恶劣海洋环境下出现的严重锈蚀破损现象,采用ANSYS有限元建立了钢板桩结构与土相互作用的数值计算模型,分析了钢板桩在锈蚀及局部破损状况下的结构安全性。通过对帽板加固法、局部外包法的有限元计算分析,得到了以上2种加固方案下的土体变位和钢板桩受力情况,并结合经济性和施工可行性等指标推荐局部外包法为最优加固方案。     

地铁列车逻辑控制电路安全服役技术应用研究

为克服传统地铁列车继电器控制电路高故障率和无记录功能等诸多缺陷,提出了基于新型二乘二取二技术的无触点逻辑控制方案.完成了系统架构设计包括热备冗余、网络通信、故障诊断、日志分析等功能.针对既有地铁列车进行了控制电路技术方案设计和施工改造,首先在分析原有控制回路原理的基础上,完成无触点逻辑控制单元替代继电器点位设计;然后综...