Multicommodity network flow model for Asia's container ports

This paper seeks to develop a multi-commodity network model to analyse the flow of containers within the Asia Pacific context. The model is used to evaluate the impact of container throughput in Asia's port by varying terminal handling charges and turnaround time. The three main regions analysed are north-east Asia, east Asia (Chinese port region) and south east Asia. Using the model, it could be shown that Busan port, which is an important transhipment hub in north-east Asia, could boost the container activities in the north-eastern part of China by improving its service quality. It is also found that the efficiency of the land link between Hong Kong and mainland China plays a crucial role for the future of Hong Kong port. While Singapore port maintains its position as a transhipment hub in south-east Asia, there would be expected competition from neighbouring low costs ports.     

Effects of the 1988/89 climatic regime shift on the structure and function of the southwestern Japan/East Sea ecosystem

In this study we compared the structure of the ecosystem and the role of major species before and after 1988/89 climatic regime shift (CRS) in the southwestern Japan/East Sea. The 1988/89 CRS event changed the biomass and production of fisheries resources in the southwestern Japan/East Sea. Total biomass of all species groups in the ecosystem increased by 59% after the CRS. These results indicate that there were substantial changes in the function of major species in the southwestern Japan/East Sea ecosystem. The relative contribution of walleye pollock, at trophic level (TL) III, to the total flow of energy decreased drastically from 33.0% in the pre-CRS period to 4.3% in the post-CRS period, while that of common squid, at the same TL, doubled from 34.2% to 72.2% during the periods.     

Evaluation of actuated control of diamond interchanges with advanced experimental design

Two three‐phase actuated control strategies at diamond interchanges were investigated for different ramp spacings and traffic patterns. An advanced experimental design, hardware‐in‐the‐loop control, was employed for the simulation study. Operational performance was identified in terms of cycle length, average delay and total stops. Experimental results showed that the two phasing strategies gave similar performance in terms of cycle length and average delay, but not stops. The cycle length of three‐phase operation increased slightly as the ramp spacing became wider. The delay of each strategy was dependent on the traffic pattern, but there was a distinct movement preference for each strategy. The total stops decreased as the spacing increased, and it was the most sensitive variable for the studied traffic demand level. It was also shown that the concept of the hardware‐in‐the‐loop control provides an effective way to evaluate the signal phasing and control strategies.     

String tyre model for evaluating steering agility performance using tyre cornering force and lateral static characteristics

The cornering force and lateral static characteristics of a tyre are fundamental factors that describe the steering feel for handling performance. However, it is difficult to justify the contribution of each factor when the tyre’s cornering motion is evaluated through subjective assessment. Currently, the relaxation length of Pacejka’s tyre model is close to describing these tyre motions. Therefore, this paper proposes a string tyre model based on the relaxation length in order to represent the steering performance. The proposed method provides a more accurate modelling of the steering agility performance. Therefore, it is possible to use this model to predict the steering response performance, and this is validated through comparison with a real relaxation length.     

Real-Time Longitudinal Location Estimation of Vehicle Center of Gravity

The longitudinal location of a vehicle’s center of gravity (CG) is used as an important parameter for vehicle safety control systems, and can change considerably according to various driving conditions. Accordingly, for the better performance of vehicle safety control systems, it is essential to obtain the accurate CG location. However, it is generally difficult to acquire the value of this parameter directly through sensors due to cost reasons. In this study, a practical algorithm for estimating vehicle’s longitudinal CG location in real time is proposed. This algorithm is derived based only on longitudinal motion of the vehicle, excluding excessive lateral, yaw and roll movements of the vehicle. Moreover, the proposed algorithm has main differences from previous studies in that it does not require information such as vehicle mass, vehicle moments of inertia, road grade or tire-road surface friction, which are difficult to acquire. In the proposed algorithm, the relationship between the ratio of rear-to-front tire longitudinal force and the corresponding wheel slips are used to determine the CG location. To demonstrate a practical use of the proposed algorithm, the ideal brake force distribution is tested. The proposed CG estimation algorithm and its practical use are verified via simulations and experiments using a test vehicle equipped with electro-mechanical brakes in the rear wheels. It is shown that the estimated CG locations are close to the actual ones, and that the deceleration can be maximized by the ideal brake force distribution.     

Model-Based Integrated Control of Engine and CVT to Minimize Fuel Use

In this study, a model-based integrated control method for engines and continuous variable transmissions (CVTs) is developed. CVT refers to a type of transmission which allows an engine to be operated independently with respect to the vehicle speed, with the engine torque and CVT gear ratio controlled in an integrated manner. In the proposed integrated control scheme, engine operating points which minimize the rate of instantaneous fuel consumption are calculated, and the engine target torque and target gear ratio are determined in an integrated manner based on the results of the calculations. Unlike the previous map-based control method, the method introduced in this study does not require an engine torque map or a CVT ratio map for tuning, and the engine torque and CVT ratio are controlled to minimize the amount of fuel used while satisfying the level of acceleration demand from the driver. The control scheme is based on the powertrain model, and the CVT response lag and transmission loss are also considered in the integrated control processes. The algorithm is simulated with various driving cycles, with the simulation results showing that the fuel economy performance of the vehicle system is improved with the newly suggested engine-CVT integrated control algorithm.     

Measurement of soot oxidation with No<Subscript>2</Subscript>-O<Subscript>2</Subscript>-H<Subscript>2</Subscript>O in a flow reactor simulating diesel engine DPF

Understanding the mechanism of carbon oxidation is important for the successful modeling of diesel particulate filter regeneration. Characteristics of soot oxidation were investigated with carbon black (Printex-U). A flow reactor system that could simulate the condition of a diesel particulate filter and diesel exhaust gas was designed. Kinetic constants were derived and the reaction mechanisms were proposed using the experimental results and a simple reaction scheme, which approximated the overall oxidation process in TPO as well as CTO. From the experiments, the apparent activation energy for carbon oxidation with NO₂-O₂-H₂O was determined to be 40±2 kJ/mol, with the first order of carbon in the range of 10∼90% oxidation and a temperature range of 250∼500°C. This value was exceedingly lower than the activation energy of NO₂-O₂ oxidation, which was 60±3 kJ/mol. When NO₂ exists with O₂ and H₂O, the reaction rate increases in proportion to NO₂. It increases nonlinearly with O₂ or H₂O concentration when the other two oxidants are fixed.     

An ERP approach for container terminal operating systems

The major characteristics of ERP (Enterprise Resource Planning) are an enterprise-wide system that covers all the business functions and information resources, integrated database, built-in best industry practice, packaged software and open architecture. ERP enables reduction of system development time, flexibility, standardization of workflow and effective business planning capability. ERP is mainly for the manufacturing industry. However, the principles of ERP can also be applied to container terminal operating systems. This paper presents an ERP system approach for a container terminal. It has clustered the workflow of a container terminal and analysed the business process to generate the best workflows. The integrated database is designed to eliminate redundancy and keep integration. The core of ERP for container terminal is the planning facility such as berth planning and yard planning. The planning capability is very tightly coupled with data flow from client entities such as shipping companies. The ERP can handle the existing problems of container terminal operation that are mainly caused by lack of integration of a whole information resource in a container terminal, ad-hoc and poor planning capability, disconnected and incorrect data from client companies. The ERP approach can not only resolve the problems of container terminals but also promote adoption of information systems for container terminals in the world that have not yet implemented terminal operating systems.     

Evaluating the impacts of urban corridor traffic signal optimization on vehicle emissions and fuel consumption

This study investigates the impacts of traffic signal timing optimization on vehicular fuel consumption and emissions at an urban corridor. The traffic signal optimization approach proposed integrates a TRANSIMS microscopic traffic simulator, the VT-Micro model (a microscopic emission and fuel consumption estimation model), and a genetic algorithm (GA)-based optimizer. An urban corridor consisting of four signalized intersections in Charlottesville, VA, USA, is used for a case study. The result of the case study is then compared with the best traffic signal timing plan generated by Synchro using the TRANSIMS microscopic traffic simulator. The proposed approach achieves much better performance than that of the best Synchro solution in terms of air quality, energy and mobility measures: 20% less network-wide fuel consumption, 8–20% less vehicle emissions, and nearly 27% less vehicle-hours-traveled (VHT).     

Exploring the impacts of road surface texture on tyre/road noise - A case study in Hong Kong

The impacts of road surface texture on tyre/road noise are explored by analysing field data applying fast Fourier transform technique to tyre/road noise spectrum analysis. The results indicate that the tyre/road noise can be higher at lower frequency bands but lower at higher bands. Cluster analysis on surface texture in terms of wavelength identified three cluster groups that centred at 1.32 mm, 3.65 mm, and 5.11 mm have different impacts on noise. The shorter wavelength group suppressed tyre/road noise, medium group aggravated it and the high wavelength group were outliers.