柴油-酒精混合燃料发动机的性能研究

在分析柴油—酒精混合燃料物理化学特性的基础上，研究了不同混合比例的柴油—酒精混合燃料发动机的性能。研究表明：柴油醇燃料发动机的有效燃油消耗率较柴油机的升高，而有效能耗率有一定程度的降低；发动机的碳烟排放明显降低，在保持同样排温的前提下，其功率有一定程度的升高，尾气排放明显降低；柴油机使用混合燃料后，滞燃期延长，燃烧持续期缩短。在采用推迟供油的条件下，柴油—酒精混合燃料发动机的尾气排放性能可以得到较大幅度的提高。     

汽车电动转向控制系统抗干扰策略的仿真

将H∞控制理论应用于电动转向系统控制方法的研究，设计了H∞控制器。仿真结果证实，所设计的控制器具有良好的抗干扰能力。     

汽油/LPG两用燃料汽车排放控制

选择桑塔纳B2电喷轿车作为研究对象，利用车用液化石油气供给装置进行了桑塔纳发动机的改装工作，并进行了大量的匹配试验。得到了桑塔纳发动机燃用液化石油气后性能变化的定量数据和调整方法。经匹配后的发动机可以达到欧洲2号标准。     

三维植被网路基边坡防护

三维植被网作为一种新型的坡面防护材料 ,具有很好的使用性能和推广价值。本文详细介绍其特点、优点以及施工工艺。并给出运用实例     

现代摩托车制动防抱死系统原理、结构及维护(1)

近年来,随着摩托车交通事故的不断攀升,摩托车的行驶安全性已成为影响社会安定的一道屏障,传统鼓式制动器已经无法满足现代摩托车安全行驶的需要,唯有采用ABS主动安全系统才能满足要求。国外摩托车自1988年开始应用ABS技术以来,已从最初的大排量豪华摩托车发展到如今的中小排量豪华摩托车上,国产摩托车也已开始应用这一先进技术。     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

空调客车围护结构隔热设计方案比较研究

利用数值分析的方法，分析了空调客车非稳态情况下四种结构车厢体的二维温度场分布，计算了车厢体的二维传热损失和热桥附加传热损失。在骨架和内衬之间加一层隔热组织改善了车的隔热特性，为客车围护结构隔热优化提供了依据。     

大城市社会公共停车场选址规划模型研究

在考虑交通系统总体效益的基础上，采用数学分析的方法对社会公共停车场的规划布局进行定量分析，提出基于广义费用最小的最优社会公共停车场选址模型，以确定城市内社会公共停车场的合理布局，使城市交通系统总体效益达到最优。     

Study on dynamic characteristics of vehicle gearbox under multi-boundary conditions

With the development of vehicle gearbox to high-power-density and high-speed, how to predict and optimize the dynamic characteristics of vehicle gearbox becomes increasingly prominent. Aiming at the vehicle gearbox, this paper comprehensively and deeply studies the dynamic characteristics under the multi-boundary conditions. The generation mechanism of the multi-source excitations triggering the gearbox vibration is analyzed firstly. The vibration transfer path of the gearbox is explored. Secondly, the engine excitation, the gear meshing excitation and the bearing support load are numerically calculated. According to the finite element method, a fluid-solid coupling finite element model of the gearbox body is established to predict the gearbox dynamic responses based on the Galerkin method and the Hamiltonian variational principle. Finally, the effects of the excitation condition, oil height and reinforcement forms on the vibration responses of the gearbox body are thoroughly studied by simulation. The analysis indicates that it not only helps to modify and improve the method of forecasting the gearbox dynamic response, and also provides the theoretical and technical guidance for the gearbox design and optimization.     

Target priority determination methods by interval-valued intuitionistic fuzzy sets with unknown attribute weights

The paper aims at the problem of multi-targets threat degree being hard to be evaluated accurately in complex air defense battlefield environments. Combined with multi-sensors information fusion and interval-valued intuitionistic fuzzy sets (IVIFS) theories, the target priority determination is studied. The score and accuracy functions of IVIFS are improved with thinking about the hesitating information in order to increase the rationality. Then, the influence factors of target priority and the nonlinear relationship between the influence factors and target priority are analyzed. Next, the algorithms for calculating the factor weights and sensor weights are given. Based on the theory of IVIFS and technique for order preference by similarity to an ideal solution (TOPSIS), two methods of target priority determination based on the IVIFS and TOPSIS are proposed. At last, an application example verifies the effectiveness and flexibility of the proposed algorithms.