港口对地区经济贡献度研究

阐述了港口相关经济活动的构成、界定了港口经济贡献的内涵和组成，介绍了港口经济贡献度的研究方法及指标体系．以华南地区某港为例，分析和计算了该港口对当地经济的直接、间接和波及贡献，并得出该港口对当地经济的总贡献度及其贡献度在当地经济发展中所占的比重．     

辽宁省公路"十一五"科技发展规划

主要介绍辽宁省公路“十一五”科技发展规划,内容包括公路科技现状与发展趋势、公路科技需求分析、公路科技发展目标与指导思想、公路科技的重点领域与关键技术,以及公路科技发展的保障措施。     

STUDIES ON DYNAMIC CHANGES AND COMPARISONS OF SERUM SPECIFIC IGM AND IGG ANTIBODIES IN PATIENTS WITH HEMORRHAGIC FEVER WITH R

ＬｉｕＺｈｅｎｇｗｅｎ（刘正稳）；ＺｈａｎｇＣｈｅｎｇｗｅｎ（张成文）；ＬｉｕＱｉｎｇｚｈｅｎ（刘清珍）；ＨａｎＳｕｘｉａ（韩苏夏）；ＷｕＳｕｇｅ（吴素歌）ＳＴＵＤＩＥＳＯＮＤＹＮＡＭＩＣＣＨＡＮＧＥＳＡＮＤＣＯＭＰＡＲＩＳＯＮＳＯＦＳＥＲＵＭＳＰＥ...     

陕西省新型农村合作医疗试点区妇幼保健现状分析

目的通过对陕西省新型农村合作医疗试点地区洛川、彬县两地妇幼保健现状的调查,了解试点地区农村妇女对妇幼保健知识的需求。方法采用分层抽样,抽取洛川、彬县育龄妇女入户进行妇幼保健现状问卷调查。结果试点地区妇幼保健服务落后,两地区有显著性差异。结论发展经济,增强妇幼保健意识和提高乡村妇幼保健人员业务水平,可有效改善新型农村合作医疗地区妇幼保健状况。     

周围性肺栓塞螺旋CT强化扫描肺密度测量的研究

目的　探讨螺旋CT平扫与强化扫描肺实质密度测量在周围性肺栓塞诊断中的作用。方法　 8只犬于DSA下复制为单侧周围性肺栓塞动物模型后进行螺旋CT平扫和强化扫描 ,根据DSA发现的栓塞肺动脉的位置 ,于螺旋CT平扫和强化扫描图像上分别测量栓塞区与对侧肺正常肺实质的CT值 ,比较双肺的CT值差异与净增CT值差异。结果　螺旋CT平扫栓塞区的CT值与对侧正常肺实质的CT值之间无明显差异 (P >0 .0 5 ) ;螺旋CT强化扫描显示栓塞区的CT值明显低于正常肺实质的CT值 (P <0 .0 1) ,而且栓塞区的净增CT值也明显低于正常肺实质的净增CT值 (P <0 .0 1)。结论　螺旋CT强化扫描可以发现周围性肺栓塞所致的低灌注区 ,是诊断周围性肺栓塞的重要间接征象     

柴油机连杆接触分析的若干问题

本文研究了连杆多体接触模型的计算问题,并以12V1807JC 柴油机的平切口连杆为例考虑了连杆两部分和轴瓦、衬套以及螺栓的相互配合关系,用有限元混合法进行了计算,并与连续体模型的计算结果做了比较.文章指出了连杆计算应遵循的一些原则.     

膨胀混凝土在双曲拱桥梁加固中的应用

双曲拱桥主拱圈是桥梁主要的承重结构,对现使用的旧双曲拱桥进行加固和提载时,增大主拱圈截面面积是一个偏于安全的措施.以辽宁阜新敖汉桥为实例,在主拱圈顶部铺设一定厚度的膨胀混凝土并在拱脚一定范围内配筋,可以有效的增强截面载力和抵抗负弯矩的能力.工程实践证明,为使新旧混凝土紧密结合并对原结构起到御载作用,使用膨胀混凝土是一种可行的方法.     

Study of steady and unsteady wet steam condensing flows in a turbine stage

Objective To develop the numerical method for the steady and unsteady wet steam condensing flow in turbine stage. Methods An Eulerian/Eulerian numerical model is used to describe the spontaneous condensation flow in the steam turbine. For the steady condensing flow computations, the mixing plane model was used. For the unsteady condensing flow computations, the sliding mesh method was used to simulate the rotor-stator interactions. Results The numerical results showed the obvious differences between non-condensing and condensing flows. The results also showed the unsteadiness effect due to rotor-stator interactions had a deep influence on the formation and growth process of water droplets. Conclusion The numerical methods presented in this paper are valid for the condensing flow in the turbine stage.     

Five-axis interpolation of continuous short linear trajectories for 3[PP]S-<Emphasis Type="Italic">XY</Emphasis> hybrid mechanism by dual Bezier blending

A novel five-axis real-time interpolation algorithm for 3[PP]S-XY hybrid mechanism is proposed in this paper. In the algorithm, the five-axis tool path for controlling this hybrid mechanism is separated into two sub-paths. One sub-path describes the movement of 3[PP]S parallel kinematic mechanism module, and the other one describes the movement of XY platform. A pair of cubic Bezier curves is employed to smooth the corners in those two sub-paths. Based on the homogenous Jacobian matrix of 3[PP]S mechanism, a relationship between the position errors of every driving joint in hybrid mechanism and the position deviation of the tool tip center point at the moving platform is established. This relationship is used to estimate the approximation error for the corners smoothing according to the accuracy requirement of tool tip center in interpolation. Due to the high computational efficiency of this corner smoothing method, it is integrated into the look-ahead module of computer numerical control (CNC) system to perform online tool path smoothing. By performing the speed planning based on a floating window scheme, a jerk limited S-shape speed profile can be generated efficiently. On this basis, a realtime look-ahead scheme, which is comprised of path-smoothing and feedrate scheduling, is developed to acquire a speed profile with smooth acceleration. A monotonic cubic spline is employed for synchronization between those two smoothed sub-paths in tool path interpolation. This interpolation algorithm has been integrated into our own developed CNC system to control a 3PRS-XY experimental instrument (P, R and S standing for prismatic, revolute and spherical, respectively). A club shaped trajectory is adopted to verify the smoothness and efficiency of the five-axis interpolator for hybrid mechanism control.     

尾部悬吊对大鼠比目鱼肌mATP酶活性的影响

目的　研究尾部悬吊对大鼠比目鱼肌梭内、外肌纤维的mATP酶活性的影响 ,旨在探讨失重条件下梭内、外肌代谢的改变。方法　采用尾部悬吊法建立模拟失重模型 ,以钙增强的mATPase法检测模拟失重不同时期大鼠比目鱼肌梭内、外肌的mATP酶活性。结果　尾部悬吊可使梭外肌Ⅰ型肌纤维的构成比减少 ,Ⅱ型肌纤维的构成比增加 ,梭内肌纤维mATP酶活性增强 ,核袋 1纤维mATP酶染色不变或由阴性转变为弱阳性 ,核袋 2纤维和核链纤维由阳性转变为强阳性。结论　模拟失重导致梭内、外肌代谢发生改变 ,梭外肌纤维类型发生转化。