Experimental investigation on the drag reducing efficiency of the outer-layer vertical blades

An experimental assessment has been made of the drag reducing efficiency of the outer-layer vertical blades, which were first devised by Hutchins and Choi (Proceedings of ASME FEDSM’02 2002 ASME Fluids Engineering Division Summer Meeting, Montreal) and Hutchins (An investigation of larger-scale coherent structures in fully developed turbulent boundary layers, Hutchins N (2003), PhD thesis, University of Nottingham). The reported drag reduction efficiency, which was as much as 30%, was quantified only in terms of the reduction in the local skin-friction coefficient. The assessment of the drag reducing efficiency did not take the side effects of the inclusion of the blades into considerations. Those effects are the increase in the wetted surface area and the flow disturbances due to the presence of the blades. In the present study, a series of drag force measurements in towing tank has been performed toward the assessments of the total drag reduction efficiency of the outer-layer vertical blades. It was found that for the case of h 4.0 × z 4.0 (h/δ = 1.04), the outer-layer vertical blades array achieved about 9.6% drag reduction without considering the increase in the wetted surface area. A proper scaling method to give collapsed plot of drag reduction efficiency C _F/C _F0 was attempted, but the correlation remained limited. Of the two scaling methods, the outer scaling is found to be relevant one.     

Aeronumeric optimal design of a wing-in-ground-effect craft

An optimization technique was used to generate a wing-in-ground-effect (WIG) configuration which can achieve the maximum lift and satisfy the height stability criteria within the design constraints. For the analysis of the aerodynamic coefficients, the vortex lattice method (VLM) was applied with the inviscid and potential flow approximations. The sequential quadratic programming (SQP) method, which is a nonlinear optimization method, was employed as an optimization tool. The lift and moment coefficients, including the stability analysis computed by VLM, were compared with the experimental results of a medium-sized WIG, and a good correlation was found between them. In addition, the optimization tool was validated by finding the optimal position of the side wing attached on the WIG craft. Then, various optimum examples are shown, with generation of the wing section, the determination of the planform configuration, the aspect ratio, and the position of the tail wing within the design constraints. It was shown that the present optimization tool can be used effectively for the optimal design of a WIG craft.     

Comparison between a reanalyzed product by 3-dimensional variational assimilation technique and observations in the Ulleung Basin of the East/Japan Sea

Reanalyzed products from a MOM3-based East Sea Regional Ocean Model with a 3-dimentional variational data assimilation module (DA-ESROM), have been compared with the observed hydrographic and current datasets in the Ulleung Basin (UB) of the East/Japan Sea (EJS). Satellite-borne sea surface temperature and sea surface height data, and in-situ temperature profiles have been assimilated into the DA-ESROM. The performance of the DA-ESROM appears to be efficient enough to be used in an operational ocean forecast system.Comparing with the results from Mitchell et al. [Mitchell, D. A., Watts, D. R., Wimbush, M., Teague, W.J., Tracey, K. L., Book, J. W., Chang, K.-I., Suk, M.-S., Yoon, J.-H., 2005a. Upper circulation patterns in the Ulleung Basin. Deep-Sea Res. II, 52, 1617-1638.], the DA-ESROM fairly well simulates the high variability of the Ulleung Warm Eddy and Dok Cold Eddy as well as the branching of the Tsushima Warm Current in the UB. The overall root-mean-square error between 100 m temperature field reproduced by the DA-ESROM and the observed 100-dbar temperature field is 2.1 °C, and the spatially averaged grid-to-grid correlation between the two temperature fields is high with a mean value of 0.79 for the inter-comparison period.The DA-ESROM reproduces the development of strong southward North Korean Cold Current (NKCC) in summer consistent with the observational results, which is thought to be an improvement of the previous numerical models in the EJS. The reanalyzed products show that the NKCC is about 35 km wide, and flows southward along the Korean coast from spring to summer with maximum monthly mean volume transport of about 0.8 Sv in August–September.     

Sequential optimization approach for the multi‐class user equilibrium problem in a continuous transportation system

We consider a city region with several facilities that are competing for customers of different classes. Within the city region, the road network is dense, and can be represented as a continuum. Customers are continuously distributed over space, and they choose a facility by considering both the transportation cost and market externalities. More importantly, the model takes into account the different transportation cost functions and market externalities to which different customer classes are subjected. A logit‐type distribution of demand is specified to model the decision‐making process of users' facility choice. We develop a sequential optimization approach to decompose the complex multi‐class and multi‐facility problem into a series of smaller single‐class and single‐facility sub‐problems. An efficient solution algorithm is then proposed to solve the resultant problem. A numerical example is given to demonstrate the effectiveness and potential applicability of the proposed methodology.     

Large-scale road network vulnerability analysis: a sensitivity analysis based approach

Traditionally, an assessment of transport network vulnerability is a computationally intensive operation. This article proposes a sensitivity analysis-based approach to improve computational efficiency and allow for large-scale applications of road network vulnerability analysis. Various vulnerability measures can be used with the proposed method. For illustrative purposes, this article adopts the relative accessibility index (AI), which follows the Hansen integral index, as the network vulnerability measure for evaluating the socio-economic effects of link (or road segment) capacity degradation or closure. Critical links are ranked according to the differences in the AIs between normal and degraded networks. The proposed method only requires a single computation of the network equilibrium problem. The proposed technique significantly reduces computational burden and memory storage requirements compared with the traditional approach. The road networks of the Sioux Falls city and the Bangkok metropolitan area are used to demonstrate the applicability and efficiency of the proposed method. Network manager(s) or transport planner(s) can use this approach as a decision support tool for identifying critical links in road networks. By improving these critical links or constructing new bypass roads (or parallel paths) to increase capacity redundancy, the overall vulnerability of the networks can be reduced.     

Identifying a behaviourally relevant choice set from stated choice data

Stated choice experiments are designed optimally in a statistical sense but not necessarily in a behavioural choice making sense. Statistical designs, and consequently model estimation, assume that the set of alternatives offered in the experiment are processed by respondents with a specific processing strategy. Much has been studied about attribute processing using discrete choice methods in travel choice studies, but this paper focuses more broadly on processing of alternatives in the choice set offered in the experiment. This paper is motivated by the primary idea that the distribution of predicted choice probabilities associated with a set of alternatives defining a given choice set might provide strong evidence on the strategies that agents appear to use when choosing a preferred alternative. In an empirical setting of a choice set of size three, four model specifications are considered including a model for the selection of the best alternative in the full choice set and three variants of a best–worst regime. Using state choice data on road pricing reform, the empirical analysis examines which model specification delivers the most accurate prediction of the chosen alternative. The results suggest which alternatives really matter in choice making and hence the alternatives that might be included in a choice set for model specification.     

Area-wide travel plans—targeting strategies for greater participation in green travel initiatives: a case study of Rouse Hill Town Centre,NSW Australia

Travel planning by employers promoting more sustainable travel has delivered less car dependent behaviour for the commute in many places. Area-wide or precinct travel plans are less common but, where they exist, attempt to provide a more holistic approach through capturing synergies between employers and employees throughout a precinct. Area-based travel planning aimed at influencing employers, employees and residents are new, especially in relation to creating synergies for a single precinct that has more of an origin focus with participants travelling to diverse destinations. This paper examines various strategies that have been employed in order to achieve greener travel and to provide a self-sustaining travel planning environment. The aim of this paper is to assess the community awareness, interest and involvement with a number of green initiatives and to understand how sustainable travel planning has been absorbed by residents within a new regional centre in New South Wales, Australia. The analysis of a resident survey undertaken in 2011 distinguishes between the community awareness and their propensity to take part in each of the greener travel initiatives. The results show that a generic approach is likely to be less effective than segmenting the market so as to more directly target likely participants. Attitudes to greener travel are also highly significant and working to change them should also affect potential take up of sustainable travel initiatives. The conclusions inform the development of successful precinct based travel demand strategies both in Australia and beyond.     

The development of taiwan arterial traffic‐adaptive signal control system and its field test: A taiwan experience

This Taiwan traffic‐adaptive arterial signal control model borrowed its traffic flow framework mainly from a British traffic‐adaptive control model with a cyclic traffic progression function, i.e. SCOOT (Split Cycle Office Optimisation Technique). The new arterial control model can take into account delays of both major and minor streets and make real‐time signal timing decisions with optimal two‐way signal offsets, so as to create the best arterial signal operation performance. It has been developed to be an online real‐time software for both simulation testing and field validation. Through simulation, it was found that the performance when operating this newly developed real‐time arterial traffic‐adaptive model was significantly better than when using the optimal fixed‐time arterial timing plan. On the aspect of field testing, three signalized intersections located in East District, Tainan City, Taiwan were selected to be the test sites. Fairly good traffic control performance has been demonstrated in that it can effectively reduce travel delays of the control arterial as a whole. Additional discussions about how to combine travel delay and the total number of vehicle stops into a new control performance index have also been included to make the new traffic‐adaptive model more flexible and reasonable to meet the expectations of different driver groups in the arterial system.     

Modelling user satisfaction in public transport systems considering missing information

Collecting data to obtain insights into customer satisfaction with public transport services is very time-consuming and costly. Many factors such as service frequency, reliability and comfort during the trip have been found important drivers of customer satisfaction. Consequently, customer satisfaction surveys are quite lengthy, resulting in many interviews not being completed within the aboard time of the passengers/respondents. This paper questions as to whether it is possible to reduce the amount of information collected without a compromise on insights. To address this research question, we conduct a comparative analysis of different Ordered Probit models: one with a full list of attributes versus one with partial set of attributes. For the latter, missing information was imputed using three different methods that are based on modes, single imputations using predictive models and multiple imputation. Estimation results show that the partial model using the multiple imputation method behaves in a similar way to the model that is based on the full survey. This finding opens an opportunity to reduce interview time which is critical for most customer satisfaction surveys.