Train scheduling simulation that minimises operational conflicts due to service constraints

This paper presents an attempt made to facilitate re‐scheduling of trains to minimize operational delays and accommodate uniform headways for off peak sub urban services subject to resource constraints such as locomotive availability, poor track conditions and stations without siding facilities. The paper describes the computer simulation model designed to optimize train schedules on single‐track rail lines. Using this simulation program it is possible to plan and optimize timetables for railway networks with train runs within short time periods for both single track and double track conditions. The paper describes the capabilities of presenting the results of the simulation runs. These include the time‐distance graph, the network with train movements, dialog boxes with information about selected trains. The programme is capable of changing the starting point, departure time, train destinations and adding or deleting a stop etc. from the user interface. Four objects of array variables are used in the simulation process to keep train and station data. Two object arrays are used for the train movements in up and down directions. The stations' data are stored in the other two object arrays. One of these arrays of stations contains all the stations of the line while the other one contains only the stations with siding facilities. A case study that covers a 61 km long single‐track line with 14 stations is presented to highlight the model capabilities.     

用一个模型分析焊轨列车应用的条件

通过对秦皇岛 -沈阳客运专线 B2 7标段情况的分析得出铺轨基地存轨场地的面积是制约焊轨列车应用的一个重要因素。以预存长钢轨的数量为主要参数 ,利用焊轨列车在两个基地间工作的时间约束关系 ,建立起相应的模型 ,通过对其中其它参数的分析 ,得出应用焊轨列车所适宜的条件。在此基础上结合一次铺设跨区间无缝线路的工艺分析了焊轨工序与铺轨、大型机械养路工序的关系 ,提出了设备配套的建议和施工中应注意的一些问题。本文对设备选型、施工组织的编制及新工艺的采用有一定借鉴意义。     

阿尔斯通开发的PRIMA 3U15型电力机车

阿尔斯通公司运输部开发了PRIMATM机车系列,其类型满足了运营部门提出的模块化和系列化要求.投放欧洲市场的PRIMA型电力机车既满足了通用性要求,又有助于与公路的经济竞争取得成效.为此,阿尔斯通公司继法国双流制机车后又开发了一种三流制机车,该型机车可用于法国、德国和瑞士之间的跨境运输.文章介绍PRIMATM系列的开发过程以及得到法国国家铁路的订单.详细叙述了PRIMA 3U15型三流制机车,重点是PRIMA电力机车的维修、可靠性和可用性.     

Understanding the impacts of a combination of service improvement strategies on bus running time and passenger’s perception

Transit agencies implement many strategies in order to provide an attractive transportation service. This article aims to evaluate the impacts of implementing a combination of strategies, designed to improve the bus transit service, on running time and passenger satisfaction. These strategies include using smart card fare collection, introducing limited-stop bus service, implementing reserved bus lanes, using articulated buses, and implementing transit signal priority (TSP). This study uses stop-level data collected from the Société de transport de Montréal (STM)’s automatic vehicle location (AVL) and automatic passenger count (APC) systems, in Montréal, Canada. The combination of these strategies has lead to a 10.5% decline in running time along the limited stop service compared to the regular service. The regular route running time has increased by 1% on average compared to the initial time period. The study also shows that riders are generally satisfied with the service improvements. They tend to overestimate the savings associated with the implementation of this combination of strategies by 3.5-6.0 min and by 2.5-4.1 min for both the regular route and the limited stop service, respectively. This study helps transit planners and policy makers to better understand the effects of implementing a combination of strategies to improve running time and passenger’s perception of these changes in service.     

“Not just a taxi”? For-profit ridesharing,driver strategies,and VMT

The spread of GPS-based location services using smartphone applications has led to the rapid growth of new startups offering smartphone-enabled dispatch service for taxicabs, limousines, and ridesharing vehicles. This change in communicative technology has been accompanied by the creation of new categories of car service, particularly as drivers of limousines and private vehicles use the apps to provide on-demand service of a kind previously reserved for taxicabs. One of the most controversial new models of car service is for-profit ridesharing, which combines the for-profit model of taxi service with the overall traffic reduction goals of ridesharing. A preliminary attempt is here made at understanding how for-profit ridesharing compares to traditional taxicab and ridesharing models. Ethnographic interviews are drawn on to illustrate the range of motivations and strategies used by for-profit ridesharing drivers in San Francisco, California as they make use of the service. A range of driver strategies is identified, ranging from incidental, to part-time, to full-time driving. This makes possible a provisional account of the potential ecological impacts of the spread of this model of car service, based on the concept of taxicab efficiency, conceived as the ratio of shared versus unshared miles driven.     

Dynamics of the railway track and the underlying soil: the boundary-element solution, theoretical results and their experimental verification

A combined finite-element boundary-element method is presented in detail to calculate the dynamic interaction of the railway track and the underlying soil. A number of results are shown for ballasted and slab track, demonstrating the influence of the stiffness of the soil and the rail pads on the vertical compliance of the track. The compliance of the track is combined with a simple model of the vehicle giving the transfer function of vehicle-track interaction. An experimental verification of the theoretical results is achieved by harmonic and impulse excitation with and without static (train-) load and by combined measurements of train-track-soil interaction. A clear vehicle-track resonance is found for the slab track with elastic rail pads and for higher frequencies at highspeed traffic, the dynamic axle loads due to sleeper passage are reduced.     

A study on the stability of a motorcycle wheel–swingarm suspension with chain transmission

The present study describes a possible driving mechanism for a self-excited oscillation observed in motorcycle dynamics, often referred to as chatter. This phenomenon, affecting the performance of road racing motorcycles, has been simulated in straight running braking manoeuvres with multibody motorcycle models. It involves rear suspension bounce and driveline oscillation in the frequency range between 17 and 22?Hz. A simplified model of a motorcycle rear suspension with chain transmission is proposed and its stability in equilibrium configurations is studied via eigenvalue analysis. The sensitivity with respect to all its governing parameters is analysed by means of stability maps and the self-excitation mechanism is explained with the aid of energy balance analysis and phase diagrams. It is found that the key role for the instability onset is played by the gradient of the nonlinear characteristic slip function of the tyre.     

平地机施工时平整度的控制与施工工艺

以“二级公路”施工为分析点，对平地机的特点进行分析，对施工工艺加以总结，就如何提高平地机的使用效率，如何提高其施工过程的平整度，如何达到所规定的质量技术指标进行探讨。     

Application of Sensitivity Methods to Analysis and Synthesis of Vehicle Dynamic Systems

The development and application of sensitivity methods for determining the effects of parameter changes on the response of vehicle dynamic systems is presented. The procedures shown can be used to enhance the analysis and synthesis processes of virtually any road or rail vehicle system regardless of its complexity. The parametric sensitivity of vehicle models in time domain, steady state models and vehicle models in frequency domain can be investigated using different types of sensitivity functions, both dimensional and dimensionless including first order standard, percentage, logarithmic, second order standard, and logarithmic and percentage sensitivity measures. These sensitivity functions and measures are determined as functions of partial derivatives of system variables taken with respect to system parameters. In the case of sensitivity functions in the frequency domain the variable values are computed as either the magnitude or phase angle of a complex element of the transfer function matrix. The methods presented enable to determine the influence of all system primary (constant) and secondary (non-constant) parameters on system primary and secondary variables. The primary variables are state variables or elements of the transfer function matrix and the secondary variables may be any functions of primary variables and system parameters. Typical secondary system parameters which can be examined include initial conditions, time variant coefficients, natural frequencies, loads, and typical secondary variables are forces, weight transfers, stability factors and energy components. The analysis of sensitivity results obtained for three vehicle handling models in both linear and nonlinear regimes of vehicle performance and utilizing various types of sensitivity functions is also presented.