Quantifying the benefit of responsive pricing and travel information in the stochastic congestion pricing problem

This paper is concerned with roadway pricing amidst the uncertainty which characterizes long-term transportation planning. Uncertainty is considered both on the supply-side (e.g., the effect of incidents on habitual route choice behavior) and on the demand-side (e.g., due to prediction errors in demand forecasting). The framework developed in this paper also allows the benefits of real-time travel information to be compared directly against the benefits of responsive pricing, allowing planning agencies to identify the value of these policy options or contract terms in publicly-operated toll roads. Specifically, six scenarios reflect different combinations of policy options, and correspond to different solution methods for optimal tolls. Demonstrations are provided on both the Sioux falls and Anaheim networks. Results indicate that providing information to drivers implemented alongside responsive tolling may reduce expected total system travel time by over 9%, though more than 8% of the improvement is due to providing information, with the remaining 1% improvement gained from responsive tolling.     

Anticipating new-highway impacts: Opportunities for welfare analysis and credit-based congestion pricing

Pricing of roadways opens doors for infrastructure financing, and congestion pricing seeks to address inefficiencies in roadway operations. This paper emphasizes the revenue-generation opportunities and welfare impacts of flat-tolling schemes, standard congestion pricing, and credit-based congestion pricing policies. While most roadway investment decisions focus on travel time savings for existing trips, this work turns to logsum differences (which quantify changes in consumer surplus) for nested logit specifications across two traveler types, two destinations, three modes and three times of day, in order to arrive at welfare- and revenue-maximizing solutions. This behavioral specification is quite flexible, and facilitates benefit-cost calculations (as well as equity analysis), as demonstrated in this paper.The various cases examined suggest significant opportunities for financing new roadway investment while addressing congestion and equity issues, with net gains for both traveler types. Application results illustrate how, even after roadway construction and maintenance costs are covered, receipts may remain to distribute to eligible travelers so that typical travelers can be made better off than if a new, non-tolled road had been constructed. Moreover, tolling both routes (new and old) results in substantially shorter payback periods (5 versus 20 years) and higher welfare outcomes (in the case of welfare-maximizing tolls with credit distributions to all travelers). The tools and techniques highlighted here illustrate practical methods for identifying welfare-enhancing and cost-recovering investment opportunities, while recognizing multiple user classes and appropriate demand elasticity across times of day, destinations, modes and routes.     

The relationship between transportation vulnerability,school attendance,and free transportation to an afterschool program for youth

Transportation - Transportation vulnerability, defined as lack of access to transportation resulting in financial, social, or health consequences, reduces quality of life. While research has...     

具有无序排列管片环结构的地铁盾构隧道数字模型智能重建北大核心CSCD

运营地铁隧道的管理、健康监测及维护正逐渐趋向于数字化、智能化;但常因地铁盾构隧道管理和检测单位缺少隧道数字模型,限制了地铁隧道智能维护和管理系统的应用和发展。文章针对地铁盾构隧道中无序排列的管片环结构,提出了一种基于深度学习和机器视觉的地铁盾构隧道数字模型智能重建方法,利用检测车获取的隧道衬砌内表面高清图片,对管片特征物(螺栓孔)进行智能识别与自动分类,再根据螺栓孔群的分布特点自动推断隧道管片环的排版规律,从而结合隧道实际线路实现隧道数字模型快速重建。某地铁隧道的实例应用结果表明,该方法适用于管片无规律性错缝拼装的情况,能以100%的准确率实现地铁盾构隧道数字模型的智能重建。     

A comparison of users’ characteristics between station-based bikesharing system and free-floating bikesharing system: case study in Hangzhou,China

The paper takes station-based bikesharing system (SBS) with docks and dockless free-floating bikesharing system (FBS) as two targets to dig out the relationship between users and use frequency of the services for each scheme, and how the relationship varies from scheme to scheme. To achieve this, studies are carried out focusing on three questions: “who are using these two bicycle services?”; “what are the factors influencing the use frequency of both bicycle systems?”; and “which specific level of the factors influencing the use frequency of both bicycle schemes?” To collect data from users, a survey was designed containing questions for user attributes and service experience and conducted jointly on-line and on-site at four locations with mixed land use in Hangzhou, China. Analysis results show that SBS and FBS have similar user structure but different factors influence use frequency. Based on analysis results, from the user perspective, SBS’s strength is to have good quality with low cost while FBS is more flexible and free to use. Finally, recommendations for SBS are to involve more technology to expand its range to aided bikes for senior citizens and open the access for a mobile renting system, whereas for FBS, it is critical to get government cooperation and for operators to add parking area restrictions into the cellphone application, and create an on-line platform where users can find all the free-floating bike information.

     

轮-轴组件的三维弹性接触分析

本文根据接触问题的参变量最小势能原理,建立了接触问题的有限元参数二次规划解,并以RE_2型车轴为例,按三维接触模型进行了计算分析。     

Traffic-balancing algorithm for can systems with dual communication channels to enhance the network capacity

The controller area network (CAN) is the dominant protocol for in-vehicle network (IVN) systems because it provides bounded transmission delay among electronic control units (ECUs) at data rates between 100 Kbps and 1 Mbps. Many automotive companies have chosen the CAN protocol for their chassis network system of intelligent vehicles. However, the increasing number of ECUs in intelligent vehicles and the need for more intelligent functions require a network system with more network capacity and real-time capability. As one approach to enhance the network capacity of a CAN system, this paper introduces a CAN system with dual communication channels. This paper also presents a traffic-balancing algorithm that predicts the traffic of each channel and allocates frames to the most appropriate channel. An experimental testbed using commercial off-the-shelf microcontrollers with two CAN controllers was used to demonstrate the feasibility of the traffic-balancing algorithm.     

西班牙Talgo 350型高速动力车头(二)

用于未来西班牙高速铁路商业运营的Talgo 350型准轨高速列车由1台动力车头和6辆Talgo车辆组成.动力车头采用了最新的空气动力学知识,安装了基于列车通信网络TCN的电子控制装置,集成了辅助逆变器的IGBT变流器和半弹性架支式悬挂的横向传动装置.     

Dynamic modeling of the electro-mechanical configuration of the Toyota Hybrid System series/parallel power train

The hybridization of the conventional thermal vehicles nowadays constitutes a paramount importance for car manufacturers, facing the challenge of minimizing the consumption of the road transport. Although hybrid power train technologies did not converge towards a single solution, series/parallel power trains with power-split electromechanical transmissions prove to be the most promising hybrid technology. In fact, these power trains show maximum power train overall efficiency and maximum fuel reduction in almost all driving conditions compared to the conventional and other hybrid power trains. This paper addresses the model and design of the electro-mechanical configuration of one of the most effective HEV power trains: case study of the 2nd generation Prius. It presents the simulation work of the overall operation of the Toyota Hybrid System (THS-II) of the Prius, and explores not only its power-split eCVT innovative transmission system but also its overall supervision controller for energy management. The kinematic and dynamic behaviors of the THS-II power train are explained based on the power-split aspect of its transmission through a planetary gear train. Then, the possible regular driving functionalities that result from its eCVT operation and the energy flow within its power train are outlined. A feed-forward dynamic model of the studied power train is next proposed, supervised by a rule-based engineering intuition controller. The energy consumption of the THS-II proposed model has been validated by comparing simulation results to published results on European, American and Japanese regulatory driving cycles.     

Robust design optimization of suspension system by using target cascading method

This study presents the robust design optimization process of suspension system for improving vehicle dynamic performance (ride comfort, handling stability). The proposed design method is so called target cascading method where the design target of the system is cascaded from a vehicle level to a suspension system level. To formalize the proposed method in the view of design process, the design problem structure of suspension system is defined as a (hierarchical) multilevel design optimization, and the design problem for each level is solved using the robust design optimization technique based on a meta-model. Then, In order to verify the proposed design concept, it designed suspension system. For the vehicle level, 44 random variables with 3% of coefficient of variance (COV) were selected and the proposed design process solved the problem by using only 88 exact analyses that included 49 analyses for the initial meta-model and 39 analyses for SAO. For the suspension level, 54 random variables with 10% of COV were selected and the optimal designs solved the problem by using only 168 exact analyses for the front suspension system. Furthermore, 73 random variables with 10% of COV were selected and optimal designs solved the problem by using only 252 exact analyses for the rear suspension system. In order to compare the vehicle dynamic performance between the optimal design model and the initial design model, the ride comfort and the handling stability was analyzed and found to be improved by 16% and by 37%, respectively. This result proves that the suggested design method of suspension system is effective and systematic.