Trip generation of vulnerable populations in three Canadian cities: a spatial ordered probit approach

This paper provides an analysis of trip generation of three vulnerable groups: single-parent families, low income households, and the elderly. It compares the mobility of these groups to that of the general population in three Canadian urban areas of Hamilton, Montreal and Toronto, based on data from large-sample metropolitan transport surveys. An ordered probit model with spatially expanded coefficients is used for the analysis. Spatial expansion shows that there are spatial mobility trends for elderly populations and low-income populations even after socio-economic attributes are accounted for. Such spatial differences are not generally found for single parent families. This novel spatial analysis provides clues as to where vulnerable populations may experience greater degrees of social exclusion. It provides information to help prioritize transportation infrastructure projects or other social programs to take into account the needs of vulnerable populations with the lowest levels of mobility.     

基于SPH方法的波浪对水平板冲击的数值模拟(英文)

A numerical model was established for simulating wave impact on a horizontal deck by an improved incompressible smoothed particle hydrodynamics (ISPH). As a grid-less particle method, the ISPH method has been widely used in the free-surface hydrodynamic flows with good accuracy. The improvement includes the employment of a corrective function for enhancement of angular momentum conservation in a particle-based calculation and a new estimation method to predict the pressure on the horizontal deck. The simulation results show a good agreement with the experiment. The present numerical model can be used to study wave impact load on the horizontal deck.     

可快速拆卸汇流排在上海地铁6号线的应用

介绍可快速拆卸汇流排的组成、性能、作用、安装方法及在上海地铁6号线的运用。     

多用途乘用车侧翻稳定性能动态测试方法研究

对比分析了国内外车辆侧翻稳定性相关的标准法规的基本情况。研究了车辆发生侧翻的类型和机理,基于侧向加速度判断车辆侧翻状态的方法,通过整车道路试验对比了正弦停滞试验和鱼钩试验诱导车辆发生侧翻的效果,初步探讨了多用途乘用车侧翻稳定性动态测试方法和评价指标,为国内车辆侧翻稳定系统的开发和测评标准的制定提供了参考。     

Creep Life Prediction of Alloy 718 for Automotive Engine Materials

This study was carried out to investigate the creep life at the high temperature of the Alloy 718 for automotive engine components using the initial strain parameter method (ISPM). Creep tests have performed at elevated temperatures in the range of 550 oC to 700 oC in this work. We also carried out constant stress creep tests. The initial strains were measured during 1 minute after loading. Both the creep stress and rupture time depend on the initial strain. We calculated the creep life of Alloy 718 by using the creep life prediction equations obtained from the ISPM. Then, we compared the creep life predicted by the ISPM to the Larson-Miller parameter (LMP). The experimental rupture time and the calculated rupture time by using the ISPM agreed with a confidence level of 95 %. The creep life predicted by using the ISPM was in very good agreement with the creep life predicted using the LMP method.     

Mathematical model validated by a crash test for studying the occupant’s kinematics and dynamics in a cars’ frontal collision

The aim of the paper was to determine the kinematic parameters that influence the occupant injury risk through a mathematical model. The developed model is a 2D model composed of 4 bodies (2 vehicles, thorax and head). The head and thorax are interconnected with a rotation joint and a torsion spring meant to stiffen the relative movement between the bodies. The thorax is connected with the vehicle body by a linear spring meant to simulate the seatbelt stiffness. The model was solved using Lagrange principle and the validation of the model was made through a crash test performed using the same initial conditions and comparing the obtained values of the displacement, velocity and acceleration parameters with the ones obtained with the mathematical model. The head and torso were chosen due to the fact that they are the common parts of the body that get injured, especially the head with the change of 80 % to cause fatal injury in car’s frontal collision. Once the model was validated, the stiffness of the seatbelt was modified in order to determine the behavior of the occupant in case of car frontal collisions. When the seatbelt stiffness was reduced, the occupant displacement and velocity increased, while by increasing the stiffness, these parameters decreased. The values of the developed model presented a high degree of similarity with the results obtained from the crash test with an error of 10 %. This model can be used by engineers to easily asses the occupant injury risk in case of vehicle frontal collisions.     

Flexural gravity wave generation by initial disturbances in the presence of current

The effect of uniform current on the generation of flexural gravity waves resulting from initial disturbances at a point was analyzed in two dimensions. The problem was formulated as an initial boundary value problem under the assumptions of the linearized theory of water waves. By direct application of the Laplace transform and then the Fourier transform, explicit expressions for the velocity potential and free surface elevation were obtained in integral forms; these were evaluated asymptotically for large distances and times by the application of the method of the stationary phase to obtain the far field behavior of the surface elevations in specific cases. Simple numerical computations were performed to illustrate the effect of uniform current on the surface elevation, wavelength, phase velocity, and group velocity of the flexural gravity waves and on the far field behavior of the progressive waves in two different cases, namely, when there is an initial depression concentrated at the origin and an initial impulse concentrated at the origin.     

THE COLONIC TRANSIT TEST IN THE ASSESSMENT OF CHRONIC CONSTIPATION

In order to assess colonic motility of chronic constipation, colonic transit test was carried out in 34 patients with chronic constipation and in 20 healthy subjects. 20 radiopaque markers are ingested at 8 am before the day test, and plain abdominal films were obtained at 24 h, 48 h and 72 h. The normal value of colonic transit test was 16(80%), or more markers passed after 72 h. By means of transit time study, 34 constipated patients were classified into 2 groups: 12 normal transit patients and 22 slow transit patients. There was no difference in colonic transit time between normal transit patients and controls (P＞0.05). Patients with slow transit had more markers left in right colon, left colon and rectosigmoid colon at 48 h (P＜0.01, respectively) and 72 h (P＜0.01, respectively). According to the transit index, 22 slow transit patients were divided into 3 types: 10 cases colonic stasis, 8 cases outlet obstruction and 4 cases colorectal stasis. The study suggests that chronic constipated patients have abnormalbilities of colonic transit.     

京沪高速铁路制梁场双层存梁设计研究

结合京沪高速铁路制梁场优化设计实践，对双层存梁方案适用的前提条件、双层存梁的平面布置形式以及存梁区有关周期节点时间等作了较深入的分析探讨；对双层存梁设计的基本思路、方法作了简要阐述。双层存梁方案研究的意义，在于进一步减少临时工程占地，节约土地资源。     

Sensitivity analysis of the probabilistic damage stability regulations for RoPax vessels

In the light of the newly developed harmonised probabilistic damage stability regulations, set to come into force in 2009, this article presents a systematic and thorough analysis of the sensitivity of the Attained Subdivision Index with reference to a wide range of related design parameters. The sensitivity of the probabilistic regulations was investigated for a typical large RoPax vessel, with variation of parameters, such as the number, positioning and local optimisation of transverse bulkheads; the presence and position of longitudinal bulkheads below the main vehicle deck; the presence of side casings; and the height of the main deck and double bottom. The effects of water on deck and of operational parameters (draught, centre of gravity and trim) were also investigated. The results of the study, presented in graphical form, can provide valuable assistance to the designer when determining subdivision characteristics at the very early stage of the design process, resulting in optimal, efficient and safe ships.