卵形钢丝气门弹簧多目标优化设计

气门弹簧广泛应用以卵形钢丝为截面的弹簧.以最大切应力最小和质量最轻作为设计目标,采用NSGA-Ⅱ算法基于MATLAB对卵形钢丝气门弹簧进行多目标优化设计.针对一实例的优化结果表明,可以准确快速得到可靠的Pareto最优解集,该优化设计方法可以为卵形钢丝气门弹簧设计提供参考.     

纯电动物流车用PMSM降开关损耗控制

物流车是城市内部运送货物的重要交通工具,具有运行距离短、启停频率高、运行时间长的特点。城市内部物流车都逐步采用纯电动物流车代替传统的燃油车。针对物流车运行特点,文章对电动物流车电机控制算法进行优化,在考虑不同工况下使用不同的开关频率,降低开关损耗,减少控制器发热。通过对降低开关损耗控制方法与传统控制方法在不同车辆运行工况下对比,电机控制器发热均有所降低,同时电机控制器效率有所增加。     

Study on launch dynamics of the tank marching fire

As an army main battle equipment, it is required that the tank should have high firing accuracy and high first round hit probability during marching. The initial disturbance of the projectile is the premier factor that takes effect on the marching fire accuracy of the tank. And the marching fire accuracy of the tank depends on the launch dynamics behaviors of the tank. In this paper, the launch dynamics theory of a tank marching fire is studied, and its launch dynamics model is established. Based on the transfer matrix method for multibody system(MSTMM) and the automatic deduction theorem of overall transfer equations, the overall transfer equation and the overall transfer matrix of a tank multibody system are deduced; the launch dynamics equations of the tank marching fire are deduced, and the dynamic response of the tank system, the motion of projectile in barrel, the initial disturbance of the projectile and the vertical target dispersion are exactly simulated; meanwhile, the results of simulation are verified by tests. This work provides both theoretical foundation and simulation approaches for improving the marching fire accuracy of the tank.     

CIM模型在高速公路投资风险评估中的应用

在分析、识别高速公路投资风险的基础上,建立了高速公路投资风险评估指标体系.针对风险因素具有结构多层次、因素多方面、评估模糊性、出现随机性、直接量化困难等特点,基于模糊理论,结合层次分析法,建立了控制区间和记忆(CIM)模型对高速公路投资风险进行评估.通过控制区间和记忆模型在工程实践中的应用,验证了CIM综合评估法在风险评估中的有效性和可操作性.     

Timing sequence changes of landscape plants in Shanghai Area,China

Based on published reports and direct observation, the common resources of landscape plant species in the Shanghai area were identified and studied in terms of the landscape characteristics of timing sequence changes over a one year time period. The results showed that there were 199 common landscape plant species in Shanghai, distributed in 67 families and 129 genera. These plants were categorized by three ornamental characteristics: flowers, foliage and fruits. The species were thus further analyzed according to the time periods which these characteristics were present. The results showed that flower ornamental distributed throughout the year, particularly from April to June, and plant species with colorful foliage could be seen every month, and particularly in November and December. On the other hand, few plant species with fruit ornamentals were observed in Shanghai area. The diversity of landscape timing sequence changes of the 199 plant species under examination was then analyzed by using the Shannon-Weiner and Simpson index formulas. The results showed that the higher diversity was observed in January, February and from August to October, while the lowest diversity was recorded from March to July and during November and December. The diversity of landscape characteristics of these plants was ranked according to foliage, flowers and fruit. Using this method, one park and one plant community were selected to evaluate the advantages and disadvantages of their time-changing plant landscape, with the goal of assessing the validity of the chosen ranking method. These results in the present study would be helpful to evaluate the plant landscape in a specified space and further enrich the diversity of plant and landscape by a target-oriented way.     

ANSYS有限元模型的桥面铺装应力分析

运用ANSYS有限元软件,对桥面铺装层的应力受油毛毡防水粘结层厚度变化的影响进行分析。通过对三跨等截面混凝土连续箱梁桥进行有限元建模分析,确定桥梁最不利荷载作用位置,并得出粘结层厚度变化的影响情况。结果表明:粘结层与下层沥青铺装间应力随着油毛毡厚度的增加而增大,上下沥青铺装层间及上层沥青铺装层表面的应力则随之减少。     

Numerical modeling of ground response during diaphragm wall construction

Construction of diaphragm wall panels may cause considerable stress changes in heavily overconsolidated soil deposits and can induce substantial ground movement. The 3D Lagrangian method was adopted to model the mechanical response of ground, including horizontal normal stress and shear stress, lateral ground displacement and vertical ground surface settlement, during the slurry trenching and concreting of diaphragm wall panels. Numerical results show that slurry trenching leads to horizontal stress relief of ground, reducing the horizontal stress of the ground from initial K0 pressure to hydrostatic betonite pressure. Wet concrete pressure lies between the hydrostatic bentonite pressure and the initial K0 pressure, so it can compensate partially the horizontal stress loss of the ground adjacent to the trench and thus reduce the lateral movement of the trench face as well as the vertical settlement of the ground surface.     

Numerical Simulation of Float-Over Installation for Offshore Platform

In this paper, a numerical investigation of a float-over installation for an offshore platform is presented to verify the feasibility of the actual installation. The hydrodynamic performance of a T-barge is investigated in the frequency domain, and the coupled motions are analyzed in the time domain. We then compare with those of the model test and determine that the response amplitude operator and the time series agree quite well. The barge exhibits favorable hydrodynamic behavior in the considered sea state, and the equipment loads are allowable. The mooring system and sway fender forces are within the permissible range. Based on these results, we can verify that the actual installation of the offshore platform is feasible. We accurately simulated many important factors and effectively reduced the risk associated with the offshore installation, which is of great importance. As such, we demonstrate that the numerical simulation of the float-over installation for offshore platforms has practical engineering significance.     

Spectral Wave Modeling in Very Shallow Water at Southern Coast of Caspian Sea

This study evaluates the capability of the Simulating WAves Nearshore (SWAN) wave model (version 41.01) in predicting significant wave height and spectral peak energy content for swell waves in very shallow water of surf zone during depth-induced wave breaking and dissipation. The model results were compared with field measurements at five nearshore stations. The results demonstrated that some breaker index formulations were successful for significant wave height prediction in surf zones. However, an incorrect shape of the energy spectrum and overestimated near spectral peak energy content at shallow water stations were obtained using all of the embedded depth-induced wave breaking formulations in SWAN. The dependent breaker index on relative depth (K_pd) formulation, which was successful in predicting near spectral peak energy content, resulted in an average error of 30%. Finally, this formulation was modified to enhance the model performance in reproducing the spectral peak energy content.